切深

This paper also describes the conditions for ensuring two engagement lines with double concave-convex circular arc profile.

讨论了中心距偏差和切深偏差相互补偿问题。文中还讨论了双圆弧齿形保持双啮合线的条件。

Cross cut with a width of 1 mm down to the metall.

作宽不少于1毫米十字切口，必须切深至基材

Cross cut with a width of 1 mm down to the metal.

宽约1毫米十字切口，必须切深至基材

Furthermore, the new ultrasonic vibration honing equipment designed according to the local resonance theory is manufactured and the second-level amplification phenomenon of individual sub-system of"flexible pole and oilstone base"in system is discovered for the first time.

粗、细磨粒超声延性域珩磨工程陶瓷材料的试验研究 a通过粗磨粒珩磨氧化锆工程陶瓷试验首次得出：普通珩磨延性切削范围小于1.5μm，同样条件下超声珩磨，延性切削范围可得到9μm，即超声珩磨的延性域切深几乎是普通珩磨的6倍。

Finish to design the micro CNC, I have to investigate the adaptable parameters for cutting. This paper had calculated tool's radius, spindle's rotational speed, radial depth, and feed speed by the instantaneous cutting areas of the cutting forces model. To find out the instantaneous cutting areas by mathematica which can calculate the tangential, radial and axial component of cutting forces during cutting.

设计完微型工具机后，接著探讨最佳的切削参数，本论文采用瞬时投影面积的数学模型，且推导出利用刀具半径、主轴转速、径向切深、进给速度等参数来做为瞬时切削投影面积的函数，并使用软体mathematica算出瞬间面积大小，预测出切削过程里所产生的切线切削力、径向切削力和轴向切削力。

The stable cutting point can also be accurately recognized on the conditions of different cutting tools.

极限切深试验表明，以稳定切削点所对应的主轴转速进行切削可以提高机床的切削效率。

Hz equation between striking force and indentation depth is built with linear plastic theory, which can be used to deal with the appearance, development of crackles.

分析了以聚丙稀酰胺作添加剂水射流的作用机理是使水分子形成了套式结构，从而增强其切深能力和集束性。

So one more drill point geometric parameter is needed, such as heel clearance angle, chisel edge clearance angle.

为了获得唯一的后刀面廓形，必须增加一个辅助参数。可供选择的补充参数有尾隙角、横刃后角、周边后角、切深后角等。

So one more drill point geometric parameter is needed, such as heel clearance angle, chisel edge clearance angle.

可供选择的补充参数有尾隙角、横刃后角、周边后角、切深后角等。

The stable lobe graph for high speed milling of 2A12 aluminum alloy thin-walled workpieces was obtained by utilizing modal parameters and force coefficients,which were acquired respectively by milling tests and modal analysis tests on Mikron high speed...

针对2A12铝合金薄壁结构零件，利用M ikron高速加工中心和相关仪器，通过铣削力实验和模态实验，分别测得特定刀具和工件系统的动态铣削力系数和模态参数，从而绘制出高速铣削薄壁零件的稳定性叶瓣图，得到了不同径向切深条件下的极限轴向切深，并通过试验进行了验证。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。