分析动力学

This paper analyzes the characteristic and variables of the ordnance supply system, gives the flow chart of the system, sets up the mathematical model of the system in system dynamics and gives an example.

本文分析了军械供应系统的特点、各类变量并进行了系统的结构分析，给出了系统的流图，运用系统动力学建立了军械供应系统的模型，最后进行了举例分析，目的在于为进一步研究提供基础。

Based on the fact that the stable tautomer of NTBC by calculation is different from that from X-ray experiment, the quantitative structure-activity relationship (Comparative Molecular Field Analysis, CoMFA and Comparative Molecular Similarity Index, CoMSIA) were studied on the five possible active tautomers in order to conjecture the structure of NTBC binding with HPPD.

基于理论计算得到的NTBC的稳定异构体结构与实验观测结构不一致的事实，利用比较分子力场和比较分子相似性指数的分析方法对NTBC可能存在的五种活性结构分别进行了三维构效分析，最终由CoMFA分析得到的最佳模型所对应的NTBC的活性结构与动力学实验推测的结合模式相吻合。

Firstly, the average equation under first,and second order of Van der pol-Mathieu-Duffing system are obtained through theatric methods. According to the stability criteria, the physical parameter plane is divided into different regions, associated with different types of steady state solutions, which are proved by employing numerical methods.

本文首先通过理论分析得到了Van der pol-Mathieu-Duffing方程在一、二阶近似下的定常解，分析了平均方程在不同参数平面内的幅值响应曲线，根据解的稳定性判据得到了物理参数平面上的分岔集以及定常运动在相应平面的分布情况，详细分析了该系统在各个区域内的动力学特性。

A dyn amical visual analysis is done about a shrouded impeller which is used in a large-scale compressor unit on the basis of visual theory and finite element analysis theory with the combination of SolidWorks and ANSYS . With the vibration characteristics of the impeller under the inertial force, we get to know whether the impeller with given conditions can avoid from the resonant frequency or not and its influence of vibration on system.

以可视化理论、有限元分析理论为基础，结合三维建模软件SolidWorks和有限元分析软件 ANSYS 对某压缩机组用闭式叶轮进行动力学可视化分析，得到其在惯性力作用下的振动特性，可以判断其在给定工况下能否避开共振频率以及评估其振动对系统的影响。

GC-MS or LC-MS is a kind of modern,fair chemical analytical technique,which combine higher separation ofChromatography with strong identification of Mass.It was applied in new drug research including concentration determination,impuritycheck,pharmacokinetic,anabolite analysis and so on.The paper reviews their application examples for recent years and shows itsdevelopment future.

气一质联用法和液一质联用法将色谱的高分离性能和质谱的高鉴别特点相结合，组成了较完美的现代分析技术，在新药研究的含量测定，有关物质检查、质量标准制定以及药物动力学研究的代谢物分析、药物及代谢物的体内浓度分布等试验中，成为有力的分析工具，文章综述了近年来色谱一质谱联用在以上领域的应用实例，展示了它的发展前景。

Mathematical model was set up,on the basis of dynamics formulation,normal expanse of the target interface ,and supposed concrete medium was constringent material.

根据弹体动力学基本方程和假定混凝土为可压缩材料，基于弹靶接触表面处靶体材料的法向膨胀性，对跳弹现象进行理论分析，在合理假设的前提下，建立了跳弹现象的数学模型； 2）针对该模型编制计算机程序，在给定初始入射速度、入射角后可以判断出能否产生跳弹现象，输出产生跳弹现象时所对应的初始侵彻条件，并通过穷举法得出跳弹临界相图，对于斜侵入情况，能计算出弹体在不同侵彻阶段下的运行时间并能绘制出侵彻轨迹，结合现有的试验数据，进行对比分析，二者符合良好，证实了理论分析模型的合理性； 3）开展了跳弹现象的数值模拟研究。

The operating case of current liquid dampers, in which have been used in engineering, has been investigated by analyzing the distribution of oil kinetics parameters such as pressures and flow velocities based on finite element method for design of constructer of the new MR fluid damper and its characteristic simulation.

通过分析目前工程中的轿车液力阻尼器工作原理，采用有限元法对阻尼器内部流体的工作状态进行了分析；探讨了油液在工作过程中的压力、流速及其流场分布的动力学特征，为流体阻尼器结构设计及其阻尼特性的数值模拟分析提供了理论依据。

Results: Mel specific binding sites were det ermined in 16 kinds of human embryonic tissue and this binding could be inhibit ed by GTPγS, supporting the theory that MR is coupled to inhibitory G-proteins system.

结果：经饱和分析、动力学分析及特异性分析证明人胚胎心、肝、肾及甲状腺等16种组织均存在Mel特异结合位点，亚细胞分布研究表明这些组织中以细胞核及线粒体MR含量最高；GTPγS能够抑制Mel与其受体的结合，使MR的结合容量或亲和力降低。

Central parts of mechanism of elevating and equilibrating were also processed static, dynamic, flectional analyses with finite element method by using Pro/MECHANICA. In the end, its dynamical model was built and simulated in ADAMS, dynamical responding of its hydraulic elevating part was analyzed, gun muzzles elevation disturbance in different fire angle and so on were obtained, work performance of mechanism of elevating and equilibrating was more studied.

使用Pro／MECHANICA对高平机的主要零件进行了有限元的静态、动态、屈曲等分析；最后在ADAMS中建立高平机动力学模型并进行仿真分析，分析其液压高低机部分在火炮发射时的动力学响应，获得了不同射角下由高平机引起的炮口高低扰动等数值，进一步验证了高平机的工作性能。

Central parts of mechanism of elevating and equilibrating were also processed static, dynamic, flectional analyses with finite element method by using Pro/MECHANICA. In the end, its dynamical model was built and simulated in ADAMS, dynamical responding of its hydraulic elevating part was analyzed, gun muzzle's elevation disturbance in different fire angle and so on were obtained, work performance of mechanism of elevating and equilibrating was more studied.

使用Pro/MECHANICA对高平机的主要零件进行了有限元的静态、动态、屈曲等分析；最后在ADAMS中建立高平机动力学模型并进行仿真分析，分析其液压高低机部分在火炮发射时的动力学响应，获得了不同射角下由高平机引起的炮口高低扰动等数值，进一步验证了高平机的工作性能。

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸，那乌黑、忧郁的眼睛，她便会相信，他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失