分析上

After verification of the program, the mathematical models of the suspension bridges were studied by means of the program, as well as the determination of the main cable's shapes and its internal forces at different stages, the calculation of the cable's unstrained length and the analysis of the construction processes, of which some new approaches were presented in the mean time. Thus makes the structural analysis results of suspension bridges more reliable and in accordance with reality.

在用算例验证了程序分析结果正确性的基础上，应用该程序对悬索桥的数学模型、各阶段缆索几何形状及内力状态的确定以及缆索无应力长度的计算和施工过程分析进行了研究，提出了确定缆索在成桥状态下的几何形状及其内力状态以及缆索无应力长度计算的新方法，使悬索桥的结构分析结果更加符合实际情况。

The paper make an intensive study of the key link in spinning mill ── the quality test and production control using capacity evenness tester which is presented by USTER TESTER, covering the analysis of relevant test results and practical application for the evenness test,the spectrogram types,the calculation of the weave length showed on a spectrogram and caused by mechanical faults,the determination and control of the evenness indexes,as well as the requirement and the plan for spinning quality control.

摘 要：探讨了纺纱质量测控的中心环节──使用以USTER TESTER为代表的电容式条干均匀度仪器测定条干均匀度时的结果分析及实际应用。其中涉及电容式条干均匀度仪的测试结果分析及应用、波谱图的分析及应用、设备的机械问题在波谱图上所造成的不匀波长的计算、纺纱条干均匀度指标及控制、纺纱质量控制方案及要求等几个方面的内容。

And the direction query efficiency based on multi-approximate index is compared with that based on taditional external approximation index. 2 The algorithms of nearest neighbor and reverse nearest neighbor about point, line and ploygen based on multi-approximate index are proposed after the virous methods of distance measure are discussed in detail. And the query efficiency of NN and RNN based on multi-approximate index is compared with that based on taditional external approximation index. 3 The basic concept of semi-join and the strategy of distance-direction semi-join are introduced. And the model of distance relationship, direction relationship and the bounding for spatial object are discussed. Then the method is presented about how to implement the query of distance-direction semi-join, and the efficiency of the algorithm based on multi-approximate index is compared with that based on taditional external approximation index.

即：1在方向关系矩阵模型、开域方向模型基础上，讨论了基于多重近似索引下的定性与定量方向检索方法，并通过实验对基于多重近似索引与外部近似索引下的方向检索效率进行了对比分析；2详细讨论了各种距离度量方法，提出了基于多重近似索引下的点、线、面的最邻近查询和反最邻近查询算法，并通过实验对基于多重近似索引与外部近似索引下的最邻近查询和反最邻近查询效率进行比较分析；3介绍了半连接的基本概念，探讨了距离关系、方向关系以及空间对象数量的约束模型，给出了基于多重近似索引下的距离方向半连接实现方法，并通过实验对基于多重近似索引与外部近似索引下的距离方向半连接的效率进行了比较分析。

By regression of experimental data, therules of the linkage between these factors, which will provide a theoretical basis for designing BBP with different scales.3 Using thermal analysis technology and dynamic thermogravimetry, the paper studies combustion kinetic characteristics of 3 types of agricultural crops at different rate of temperature rise, and thus, achieved dynamic parameters of these fuels at different rate of temperature, established dynamic model of straw combustion, which reflects the dynamic process in the fast combustion area.4 Characteristics of straw briquette combustion was experimented, focusing on the impact of straw type, temperature, air supply, and density, diameter, and weight of briquette on the combustion speed, and the following conclusions were drawn:(1) combustion of straw briquette fuel is static permeation diffusion combustion;(2) temperature has a larger impact on the speed of straw briquette combustion than air supply; the higher the combustion temperature is, the faster volatilizable component separates out, and the less steady the combustion is;(3) density of briquette fuel has impact on the speed of volatilizable component separation and therefore the combustion speed;(4) increase of diameter and weight of briquette fuel increases the average combustion speed in the initial stage, and that in the later stages is comparatively steady;(5) the proportion of volatilizable component in straw briquette fuel is high, therefore, the temperature control during combustion under the rational ventilation condition is essential to ensure its safe combustion.5 Using the above-mentioned results of experiments and theoretical analysis, and based on thought of hydraulic driven and bi-direction compression, the hydraulic system and compression parts of the HBP BBP are re-designed in terms of industrialization.

利用热分析技术，采用动态热重实验法，对我国的三大农作物秸秆在不同升温速率下的燃烧动力学特性进行了较系统的研究。得到了各原料在不同升温速率下的动力学参数；建立了秸秆燃烧的动力学模型，该模型反映了秸秆迅速燃烧区的动力学过程。 4 对秸秆成型燃料的燃烧特性进行了试验研究。着重研究了秸秆河南农业大学博士学位论文巫的种类、温度、空气供给量、成型燃料密度、直径、质量对成型燃料燃烧速度的影响并得出如下主要结论：①秸秆成型燃料的燃烧方式属于静态渗透式扩散燃烧。②秸秆成型燃料燃烧速度受温度的影响大于通风量燃烧速度的影响：燃烧温度越高，挥发分析出速度越快，燃烧平稳性愈差。③成型燃料密度影响成型燃料挥发分的析出速度，影响燃烧速度。④成型燃料直径和质量的增加，使得燃烧初期的平均燃烧速度增大，中后期的平均燃烧速度相对平稳。⑤秸秆成型燃料含挥发分比例高，因此合理配风下的控温燃烧是保证其完全燃烧的关键。 5运用已取得的试验和理论分析结果，以液压驱动、双向成型为基础，从产业化的角度对HBP型成型机进行了液压系统和成型部件的改进设计；同时采用了二级预压机构，使该成型机的生产率达到 500kg.hd；单位能耗 60kwh。上'左右，磨损件修复周期 300小时左右，基本解决了影响生物质固化技术在国内推广的技术难题。

And the design method for U-steel yieldable support and combined structure of steel and concrete is discussed.

论文首先介绍了地下工程支护结构理论的发展及其研究现状；结合五轮山煤矿施工现场，论文采用超静定结构力学计算方法、有限元的分析方法，主要对浅埋强风化段支护结构进行了力学分析；在总结现有文献研究成果的基础上，分析了型钢与混凝土的粘结机理，介绍了U型钢可缩性支架缩动前后的内力计算方法，讨论了考虑U型钢可缩性支架稳定性的承载能力问题，阐述了U型钢可缩性支架参数选择的原理。

The feasibility of magnetic capture has also been discussed. 3. Process design of the MB microsystem.

在对静磁学理论及层流理论进行研究归纳的基础上，分析了磁珠微系统的工作原理，对设计的磁珠微系统进行建模，进行磁场模拟分析，建立了磁场捕获的可行性分析。

At the same time, on the base of the analysis and study of the characteristic of sliding stability failure of loess slope in Sanmenxia area, a method, which is suitable for many hori

同时，在对三门峡地区黄土边坡滑动失稳特征进行分析研究的基础上，采用了一种适合多种土层、不同坡型的边坡稳定性分析方法，对三门峡地区四处深路堑黄土边坡实体工程稳定性进行分析及评价。

Based on this analysis, it puts forward analysis set of statistical data in construction industry.

针对某市领导讲话中的数据与事实有违的问题，本文分析了目前我国建筑行业统计数据分析偏失问题及其产生的原因，并在此基础上提出了建筑行业统计数据分析定势。

There are few literatures to study volatility spillover of the financial market with SV model, and the literature on multivariate SV of studying volatility spillover between the multi-financial markets was not adverted.

为了同时研究分析金融市场之间的波动溢出，作者在研究多元SV模型的基础上，建立了能分析判断波动溢出的模型－VS-MSV模型，并进行了实证分析。

Firstly, the flood control regulation of TGP in Sep is computed based on the analyses on the inflow in Sep and Oct, and the risk and loss on the ahead impounding scheme is calculated and analyzed. Then, the storage level, power production and releasing discharge are achieved by computing on the electricity generation model through reservoir regulation graph. Thirdly, obstruction in channel is analyzed and the problem in the Chongqing reach is more serious in 175-145-155m scheme. The sediment aggrading process and distribution on different schemes is calculated by 1-D reservoir mathematical model. The navigation benefit is computed by navigation model. Based on above calculations, the impounding time is decided by the multi-purpose decision model, and evaluate by analytical hierarchy and balance layout model. A best impounding scheme is achieved to match the requirement of flood control electricity generation and navigation et al.

首先，在对宜昌站9、10月份来水分析的基础上，采用第2章建立的防洪优化调度子模型进行了三峡水库9月份防洪调度，分析了汛末提前不同天蓄水对防洪的影响，计算了汛末不同蓄水方案水库9月份的洪灾风险率和风险损失；接着，根据第2章建立的发电调度子模型进行了三峡水库发电调度计算，得出了不同蓄水方案下水库的坝前水位、发电量及下泄流量过程；然后，分析了175-145-155m方案下三峡水库的碍航问题，指出175-145-155m方案下重庆河段的碍航问题最为严重，通过进行不同蓄水方案下水库一维泥沙冲淤计算，得出了不同蓄水方案下库区淤积过程及分布，并通过航运调度子模型，计算了不同蓄水方案下水库的航运效益；最后，根据以上防洪、发电及航运调度计算的结果，运用第3章水沙多目标决策模型对水库的蓄水时间进行了多目标决策，并采用层次加权均衡规划模型对计算结果进行评价，得到一个能满足水库防洪、发电及航运各方面要求的最佳蓄水方案。

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸，那乌黑、忧郁的眼睛，她便会相信，他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失