分布参数
- 与 分布参数 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
In numerical simulation, the distribution of polygonal cracks was simplified as an axisymmetrical problem with a double hardening elasto-plastic model adopted for soil skeleton.
数值分析中将多边形网状分布的裂缝简化为轴对称问题,对土骨架采用弹塑性的双硬化模型进行描述,并分析了不同参数对裂缝宽度和深度影响的敏感性。
-
Titanus in Europe as the source data, the above three bioclimatic variables as parameters, BIOCLIM as algorithm, the distribution of S. titanus in North American was analyzed in order to test whether these parameters are appropriate or not. The results revealed that the Great Lakes region of USA and Canada and the Finger Lakes region of New York State were the best habitat for S.
结果表明:以月平均温、最冷月最低温和最热月最高温变量为参数,以欧洲的已知分布为源数据,用 BIOCLIM 算法可以准确预测出包括美国和加拿大的大湖区和纽约州的芬格湖群在内的大片区域是葡萄带叶蝉在北美洲的适生区。
-
Methods We applied biological climate model S. invicta population dynanaics model, nonparametric regression model (Generialized Additive Model GAM), three differentmethods of analyzing and forecasting, to explore ways forecast biogeographical distribution correctly.
研究方法:本研究利用生物气候模型、红火蚁种群动态模型、非参数回归统计模型(Generialized Additive Model GAM)三种不同的分析预测方法,对有害生物的空间分布预测方式进行探索。
-
The major research includes the following three points. First, using finite element method, the influence factors on propagation properties for PMF couplers are analyzed, including the shape of coupler cross-section, the taper of coupler bipyramidal and the angle deviation of the birefringent axes.
基于热-结构-电磁多物理场耦合有限元方法,分析了保偏光纤耦合器的传输特性和耦合系数在熔锥区的变化规律,从而求解耦合模方程,得到偏振光经过耦合器后的光功率分布,继而对保偏光纤耦合器的性能参数分光比、消光比及附加损耗进行理论分析。
-
The interference corrosion of external steel structures located next to cathodically protected systems was evaluated based on electric field theory of stable currents.
摘要采用稳流电场理论,根据阴极保护体系周围电场分布、受电干扰构件位置和构件表面电化学行为等参数计算阴极保护系统对外部金属构件的电干扰腐蚀。
-
The pharmacokinetics of Hup A in blood and eerebrospinal fluid after intranasal, intravenous and intragastric adminstration to rats was studied using cisternal cannulation for serial CSF sampling and femoral artery cannulation for serial blood sampling.
以市售片剂和注射液为对照,用小脑延髓池插管法采集脑脊液,股动脉插管取血,测定其在大鼠脑脊液和血中药物动力学参数;用组织匀浆法,测定其在大鼠脑组织中的分布;用Morris水迷宫法、跳台法和避暗法试验其对大鼠和小鼠模型的药效。
-
Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.
XPS研究结果表明,MAO不仅仅只和乙醇作用,MAO还与MgCl_2本身有一定的作用,这是一个极为重要的发现;3、通过ICP和EDX表征,发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布;4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能,特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化,并且催化剂寿命长,表现出稳定的动力学行为,最终获得了高堆密度(大于0.35g/ml)的球形聚乙烯颗粒;5、本文选择MSPC-5为研究对象,考察了聚合反应参数对催化剂的活性及其聚合物的影响,研究发现:不同的烷基铝对催化剂具有非常重要的影响,特别足TIBA对MSPC-5的助催化活性最高,烷基铝的加入量有一个较佳值,聚合温度为80度时活性最高,H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小;、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨,制备出了一种的新型的氯化镁载体,并将该载体用于多种单活性中心催化剂的负载化研究,研究表明:1、通过BET、XRD的表征,再次证实了MAO与MgCl_2之间具有直接作用,与XPS的研究结果相一致;2、当研磨时间高于12小时时,延长研磨时间对载体的结构没有显著的影响;3、将配合物3负载于共研磨时间不同的一系列载体上,乙烯聚合结果表明,尽管共研磨时间对负载催化剂的活性具有明显的影响,但是它对聚合物的性能以及催化剂的影响不明显。
-
Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.
XPS研究结果表明,MAO不仅仅只和乙醇作用,MAO还与MgCl_2本身有一定的作用,这是一个极为重要的发现; 3、通过ICP和EDX表征,发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布; 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能,特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化,并且催化剂寿命长,表现出稳定的动力学行为,最终获得了高堆密度(大于0.35g/ml)的球形聚乙烯颗粒; 5、本文选择MSPC-5为研究对象,考察了聚合反应参数对催化剂的活性及其聚合物的影响,研究发现:不同的烷基铝对催化剂具有非常重要的影响,特别足TIBA对MSPC-5的助催化活性最高,烷基铝的加入量有一个较佳值,聚合温度为80度时活性最高,H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小;、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨,制备出了一种的新型的氯化镁载体,并将该载体用于多种单活性中心催化剂的负载化研究,研究表明: 1、通过BET、XRD的表征,再次证实了MAO与MgCl_2之间具有直接作用,与XPS的研究结果相一致; 2、当研磨时间高于12小时时,延长研磨时间对载体的结构没有显著的影响; 3、将配合物3负载于共研磨时间不同的一系列载体上,乙烯聚合结果表明,尽管共研磨时间对负载催化剂的活性具有明显的影响,但是它对聚合物的性能以及催化剂的影响不明显。
-
Finally, the intelligence monitoring and diagnosis system of the temperature-field in hearth was built on the base of the model, which can monitor and diagnose all the wind-coal parameters online and display the temperature distributing in the hearth dynamically and estimate the position of the deflective burning cut-circle.
最后,在炉内二维温度场动态显示模型基础之上,开发了一个煤粉锅炉炉内温度场智能监测与诊断系统,该系统能够对各个风粉参数进行在线监测与诊断,动态显示炉内特征截面的温度分布状况以及对燃烧切圆偏斜的具体位置做出准确判断。
-
METHODS: The expressions of S100A4 and Ecad were detected by SP immunohistochemistry in histological section of ovarian tumor, and the relationship between the results and clinical pathological parameters were assessed.
采用免疫组织化学法SP法检测S100A4蛋白和Ecad在上皮性卵巢肿瘤中的表达与分布,结合临床病理情况分析两者与临床病理参数之间的关系。
- 推荐网络例句
-
According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.
曝气设备的动力效率在叶轮转速为120rpm~150rpm时取得最大值,此时氧利用率和充氧能力也具有较高值。
-
The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.
稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世,形体几无变化。
-
When I was in school, the rabbi explained everythingin the Bible two different ways.
当我上学的时候,老师解释《圣经》用两种不同的方法。