冷却

The cooling fan is provided in the inner case to blow cooling air over the board.

冷却风扇设置在内部壳体中，用于向电路板上吹冷却空气。

This paper using the FEM software Marc, for the 50 and 60 degree V groove of flat plate butt joint simulate the one-layer and three layers welding, finish each welding and cooling it down to room-temperature then start the next welding true represent process and get the temperature field, residual deformation and welding residual stress, according to the theory analysis and empirical equation verified the temperature field and residual deformation all correct, comparison with experiment verified the welding residual stress regularity and correctly.

本文利用有限元软件Marc，对开60°和50°V型坡口的平板对接接头，动态的模拟了单层单道打底焊，焊完一道后让试件冷却到室温以及单层单道满焊，每焊完一道后让试件冷却，然后再焊下一焊道，道间温度≤200℃，在以此为初始边界条件下开始下一道的焊接，真实的再现了焊接过程，得出了温度场，残余变形和残余应力场的分布规律，根据理论分析及经验公式验证了温度场以及残余变形的正确性，角变形的大小，这些结果与数值计算相吻合。通过与实验测得的残余应力进行比较，验证了焊接残余应力的分布规律及模拟的正确性。

For the high temperature above 300 ℃ medium, not only泵头need some cooling, the suspension should also be room bearing a cooling system, pump structure of the general form of support for the center, the mechanical seal the best use of metal bellows-type, but the high price ( Price is the general closure of the 10-fold).

对于300℃以上的高温介质，不仅泵头部分需要冷却，悬架轴承室也应设有冷却系统，泵结构一般为中心支承形式，机械密封最好采用金属波纹管型，但价格高（价格是普通机封的10多倍）。3。

For example, in cases where the target temperature is 60° C., the fan revolution speed, which is shown by a two-dot chain line, does not rise immediately when the actual temperature of the cooling target fluid exceeds the target temperature of 60° C.

例如，在的情况下，目标温度为60 ° C时，风扇转速，这是表现出两个斑点链路线，并没有立即上升时，实际温度的冷却液指标超过目标温度为60 ℃之间，但后，冷却液的目标，极大地overshoots目标温度。

Through optimum design to cooling water chamber structure of blast furance, reasonable commanding water flow and increasing speed of water flow, the cooling capacity of tuyere is increased more toan 10 times compared with vacant chamber tuyere.

通过对高炉风口冷却水腔结构的优化设计，合理布置冷却水流，提高水流速度，增加换热面积，使风口的换热冷却能力较空腔风口提高10倍多。

This set of equipment includes: auto-stirring, aerating-and-conveying system, system of automatically sucking cups, oil-blasting system,material-padding system, cloth-spreading system, swerving-and-passing system, system of automatically separating raw material from plates, cooling system, and auot-washing system.Additionally, if you replace the mould plate and the die in the equipment of the auto-material plate and give a proper adjustment,you can make various cakes.

全套设备包括：自动搅拌、充气连体送料系统、自动吸纸杯系统、喷油系统、注料系统、撒布系统、转弯送盘系统、热风循环烘炉系统、冷却输送系统、转弯自动送盘系统、自动注料系统、自动料盘分离系统、冷却系统、烤盘自动清洗系统等组成，该设备只要更换模盘及自动料盘分离设备中模具和适当调整其中设备，就可生产多种花色蛋糕食品。

The cooling crystallization and the polymorphic transition processes of L-Serine in aqueous solution were real time monitored by PVM and FBRM. The results show that at a higher temperature, the anhydrous crystals form in club-shaped habit, while the temperature of the slurry was cooled under the polymorphic transition temperature, the club-shaped anhydrous crystals would translate to the hexagonal plate-shaped monohydrate crystals.

利用PVM和FBRM对L-丝氨酸水溶液的冷却结晶过程和晶型转变现象进行的实时监测表明，在高温区析出的是棒状无水合L-丝氨酸晶体，当冷却至晶型转变温度以下时，棒状晶体逐渐转变为六角片状的水合晶体。

The design of the leads unit, low thermal resistance and high electrical isolation heat intercept connection, stability of HTS current leads, optimum design of conduction cooled current leads is analyzed in detail.

对引线单元的结构设计、引线的导热绝缘冷却结构、稳定性等问题，以及传导冷却的铜电流引线优化设计进行了详细分析和计算。

In order to acquire the thermalcontraction value of the plate during cooling and offer the proper value for modifyingmold,The rule of thermal contraction have to be analyzed during cooling.

为了得出中厚钢板弯曲件在冷却过程中所产生的收缩量，为模具修正提供合理的修模数据，有必要分析其在冷却过程中收缩的规律。

Based on the data from heat water experiments for counter flow and cross flow cooling tower in laboratory with different water flow rate, air flow rate and water falling height, the equivalent diameters of water drop under corresponding conditions are obtained.

在逆流式冷却塔中，水的冷却分三部分：喷头、填料、雨区。但是，在进行填料的模拟试验中，要把上述三部分的热力特性分开，是很困难的。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。