再混合

The effects of such parameters as temperature, pH, feeding rate,concentration, [NH_3]_T/_T molar ratio, surfactants and agitation, on the morphology and size of the particles, were studied and conclusions obtained are as follows:(1) The morphology and size of the particles are mainly decided by the species of nickel oxalates present.(2) Speeding up dissolution-recrystallization process benefits the preparation of the particles of being composed of a single species with uniform morphology and high aspect ratio.(3) The variations of nucleation and growth supersaturation under different conditions have definite effects on the morphology and size of the particles.(4) Adding PVP25 at a proper amount is beneficial to the preparation of fibrous nickel oxalate particles with high aspect ratio. 3 The formation mechanism as well as the morphology and size control of fibrous cobalt oxalate particlesThe cobalt oxalate particles with fibre morphology were prepared using CoCl_2 solution and mixed(NH_4)_2C_2O_4, NH_3·H_2O solution by a double jet process.

研究了温度、pH值、加料速度、浓度、[NH_3]_T/_T摩尔比、表面活性剂及其添加量、搅拌等对颗粒形貌与粒度的影响，主要结论为：(1)草酸镍化合物种类是决定颗粒形貌与粒度的最主要因素；(2)提高陈化中溶解—再结晶速度，有利于得到物相单一，形貌规整，轴向比大的粉末；(3)不同条件下，颗粒形核与生长过饱和度改变，也会对粉末形貌与粒度产生一定影响；(4)适量添加PVP25有利于大轴向比纤维状草酸镍的制备。3纤维状草酸钴的形成机理及其形貌与粒度控制采用CoCl_2溶液与(NH_4)_2C_2O_4和NH_3·H_2O混合溶液并流加料合成的方法，研究了纤维状草酸钴的制备。

Been trying to think what a Belgium smells like (thepost -- war travelling Belgiums)think it is a blend of traitorous King, toe jam, un --washed navels, old bicycle saddles,, paving stones, and eminently soundmoney with a touch of leek soup and cooking parsnips.

我一直在努力回想，比利时人身上的味道像什么。我想，也许是多种味道混合在一起形成的一种怪味吧——叛变的国王，挤在一起的脚趾，没有洗的肚脐，破旧的自行车座，铺路的石子，大量钱财，再加上一点儿韭菜汤和烹调用的欧洲防风根和在一起的味道。

Our works discuss the magnetic characteristics of wasp-waisted hysteresis loops and outline a rationale for this type of behavior by superposition of hard and soft magnetic phases. Because of the absence of magnetic interactions between particles, in measurement procedure, we could sum the magnetization mathematically of the isolated particles at each field value to create a composite hysteresis loops.

进一步再以复合模型磁相叠加的特性，以考虑忽略软硬磁晶粒间彼此交互作用的前提下，将软磁与硬磁的磁滞曲线以线性叠加得到不同磁场强度下各材料的磁化强度以描绘出该复合模型的磁滞曲线，并发现磁相叠加与实际量测的磁滞曲线虽相近但仍有其差异，而其差异则系由於软硬磁混合样品中其晶粒间仍有交互作用之存在。

The liquid phase is coupled device is the low voltage gradient itself in a high-pressure pumps add ratio valves in the atmosphere will be set according to the proportion of online several solvents mixed, then pump into the gas system.

液相色谱中的低压梯度洗脱装置就是在高压泵之前加上一个比例阀，在常压下将几种溶剂按设定的比例在线混合之后，再泵入色谱体系。

The method comprises: adding 4-(3,4-dichlorophenyl)-1-tetralone and solvent at a ratio of 1:(3-4) into a three-necked flask with a stirrer, heating under stirring until 4-(3,4-dichlorophenyl)-1-tetralone is completely dissolved, heating to 60-100 deg.C, refluxing for 0.5-2 h, cooling the filtrate to -5-10 deg.C, filtering, recrystallizing to obtain refined 4-(3,4-dichlorophenyl)-1-tetralone, and drying at 40-80 deg.C to obtain dry 4-(3,4-dichlorophenyl)-1-tetralone.

该方法的步骤是：在带搅拌的三颈瓶中依次加入4-(3，4-二氯苯基)-1-萘满酮和溶剂，溶剂与4-(3，4-二氯苯基)-1-萘满酮的L∶W为3～4∶1，将上述4-(3，4-二氯苯基)-1-萘满酮及混合精制溶剂搅拌下升温，使4-(3，4-二氯苯基)-1-萘满酮全部溶解，升温至60～100℃，回流0.5-2h；滤液用冰水冷却至-5～10℃，过滤，所得物料再用上述方法进行一次重结晶得到精品4-(3，4-二氯苯基)-1-萘满酮，40～80℃干燥后即得到干品4-(3，4-二氯苯基)-1-萘满酮。

This paper presents conductive polymer molecular materials with insulating powder, mixed into the deployment of surge suppressors for low capacitance of paste, while the component design concept is based on the field of passive components, manufacturing process to make the basic theory to design the protective components, the main use of the existing ceramic substrate for the component body structure design, screen design in the body through the structure of the gap at the top of the printing layer of a different conductors, and then to learning to know the printing process technologies approach the low capacitance of the surge suppressor paste cover the gap in the two conductors, and by the resistance of plastic burning process technology, the temperature of sintering parts made of electrostatic protection element, and this protection through the external ESD components in bombardment tests, measurement of capacitance electrostatic discharge after bombardment, Trigger voltage and leakage current data, and the volume measured by the results of future discussion of the layout of this different style of work in the same area, different clearance, solid content and temperature than the next, for the attainment of performance components, a low capacitance ESD protection devices with low breakdown voltage requirements and to chip-based protection devices can be designed to integrate with the advanced Integrated Circuits or used independent of the electrostatic protection element in the system.

本文提出高分子导电分子材料搭配绝缘粉末，调配混合成适用於低电容突波抑制器之PASTE，而元件设计概念是以被动元件制程领域作基础理论去设计此防护元件，主体利用现有陶瓷基板为元件本体结构设计，在经由网版设计在本体结构上方印刷一层不同的间隙导体，再以习知印刷制程技术方式，将低电容突波抑制器之PASTE覆盖在两导体的间隙内，并经由电阻制程习知塑烧技术，将元件烧结适当温度制成静电防护元件；而此防护元件在经外加静电放电轰击测试后，量测静电放电轰击后的电容、Trigger voltage及漏电流相关数据，并藉由测结果讨此同的布局样式，在相同工作区面积、不同间隙、固含量与温度比下，对於元件效能是否达到静电防护元件低电容与低崩溃电压的需求，并藉此晶片型防护元件可设计整合於先进积体电或应用於独系统的静电防护元件中。

I'll describe a shot from the Exterior Brookfield sequence of an exterior of a row apartment on fire with an explosion blasting out the third story windows. The shot was composited on an Inferno by Bob Wiatr. We started with a live plate of the street scene. Our first task was to remove a foreground chainlink fence and camera crew. We recreated the fg matching the flashing ambulance lights. To create a snowy, misty look we used a number of logic ops of the bg with a mist plate which was basically the bg heavily blurred and multiplied back onto itself, graduating to create a sense of dimensionality. Glows were added around lights and flames using Sapphire plug-ins and light beams were added to streetlights. Four or five layers of 3d particle snow created in Maya were combined with practical elements varying in size and focus depending on distance from the camera.A miniature explosion element was incorporated into the comp, also with added glows, interactivity with the building, and rotoscoping of foreground objects. The entire comp was then time warped for editorial matching with the subsequent cut.

我可以描述一个Exterior Bookfield的几个镜头，那是一排的公寓着火，在三楼窗户引起爆炸，这个镜头是Bob Wiatr用Inferno合成的，我们用一个现场的街道镜头开始，我们的第一个任务是删除一个在前景中的链条状的篱笆和摄像人员，我们重新制作了前景以期与前景中的闪烁的救护车灯匹配，为了制作一个下雪的雾蒙蒙的效果，我们用了大量的logic ops，用了一个雾层，这个层基本上就是把背景尽量模糊然后再把它重新加到背景上面，渐变式的制作出一个层次感，自发光用Sapphire插件加在灯光和火焰的周围，而光线被加到路灯上，在maya中制作的四到五层的三维的粒子雪用来和不同大小的真实的素材混合在一起，焦距则依赖镜头的景深，同时在楼房爆炸的地方加入了一个缩小了的爆炸素材，以及爆炸的辉光效果，和重新放置的前景物体，整个的镜头接着匹配时间用来做最后的剪辑制作。

Microstructure and property of electrospun regenerated silk fibroin /gelatin nanofibers;2. Regenerated silk fibroin membrane was prepared by using waste silk at room temperature.

采用桑蚕废丝制作再生丝素室温干燥膜，并以不同质量比例与水溶性胶原蛋白混合，溶解于质量分数为98%的甲酸中制得不同质量分数的纺丝液，选择一定的工艺参数进行静电纺丝。

HOME GARDEN: You can grow your own food and cooking herbs, gather and reuse rainwater in rain barrels, save seeds, reuse containers as planters, compost, can and preserve, plant ground cover instead of lawn that needs to be mowed, and plant trees for shade and to guard your home from wind. Consider manual or electric tools over gas-powered ones.

家庭花园：你可以自己种植食物和制作调味料，在雨桶中收集并再利用雨水，节约种子，再次利用像培植器皿，装混合肥料、罐头、蜜饯等东西的容器，种植地被植物进而取代需要经常割草的草坪，种植一些树木用来乘凉，还能为你的房子挡住大风。

When the pulverized material has been properly sized, mixed with the additive in the amount determined by testing, laid and compacted to the required density, surfaced with a chip seal coat, thin hot mix overlay or other light surfacing, a long lasting, low cost pavement can be constructed with a minimum of new material.

只有当被压碎的材料已制成合适的大小，混合了经测试确定的适量添加剂，铺设并压紧至要求的密度，再用一层碎片封闭层、热混薄覆盖层或其它轻质的材料铺平表面，经时效处理后，方可达到以用量最少的新材料构筑出低成本路面的目标。

It has been put forward that there exists single Ball point and double Ball points on the symmetrical connecting-rod curves of equilateral mechanisms.

从鲍尔点的形成原理出发，分析对称连杆曲线上鲍尔点的产生条件，提出等边机构的对称连杆曲线上有单鲍尔点和双鲍尔点。

The factory affiliated to the Group primarily manufactures multiple-purpose pincers, baking kits, knives, scissors, kitchenware, gardening tools and beauty care kits as well as other hardware tools, the annual production value of which reaches US$ 30 million dollars.

集团所属工厂主要生产多用钳、烤具、刀具、剪刀、厨具、花园工具、美容套等五金产品，年生产总值3000万美元，产品价廉物美、选料上乘、质量保证，深受国内外客户的青睐