再处理

The eluviation experiment of the two-stages column filled with steel slag farther showed this process can be used as the pretreatment stage of chromium-containing wastewater treatment in industry.

结果表明，经硫酸亚铁还原处理后再用钢渣处理比单纯用钢渣处理的效果明显提高，采用钢渣／总铬质量比为40的100目钢渣处理经硫酸亚铁还原后的含铬废水，总铬和Cr^6＋去除率分别达79％和84％，采用钢渣柱进行的两级淋滤实验进一步表明该方法可作为工业上含铬废水处理的预处理段。

Combined with animal model of peradaptation to myocardium ischemia , the research observed the level of enzymatic dynamics of myocardium, SOD,MDA,ET and correlation peptide of calcitonin gene in peripheral blood and cardiac function, apoptic cell and expression of apoptosis regulatory gene, ultrastructure of myocardium with BIOPAC16, in situ end labeling and hybridism, optic microscope and electron microscope. The study of animal model of peradaptation to myocardium ischemia illustrated that the peradaptation and pretreatment with Wenxin capsule could be positively protective for the injury of ischemia reperfusion. The protection is mainly reflected by reduction of infarction area, correction of heart rhythm abnormality of ischemia reperfusion, melioration of the contraction and relaxation function of myocardium, recovery of the subcellular structure and themelioration of the abnormality of biochemical and bioactive substance in the myocardium.

并结合心肌缺血预适应动物模型，采用BIOPAC16导生理记录和分析处理系统处理心肌功能指标，采用原位末端标记及原位杂交技术标记凋亡细胞及凋亡相关调控基因的表达，采用光电镜技术观察心肌超微结构的变化，同时观察外周血心肌酶、超氧化物歧化酶、丙二醛、内皮素、降钙素基因相关肽等水平，结果表明心肌缺血预适应及温心胶囊预处理对心肌缺血再灌注损伤具有肯定的保护作用，其保护心脏作用主要表现在缩小心肌梗死范围、抗缺血再灌注心律失常、改善心肌收缩和舒张功能、减轻心肌超微结构损伤，调节心肌生化物质及生物活性物质的生成和释放。

Setting: University hospital research laboratories Subjects and Interventions: NB4 and A549 cells were separately cultured with ATRA and/or dexsamethasone for 1-3 days. NB4 or ATRA -NB4 cells were then placed in an upper insert and co-incubated with A549 cells or their conditioned medium located in a lower plate.

材料与方法：将NB4 细胞与 A549 细胞分别经有／无全反式维甲酸及 dexamethasone 处理 1-3 天，再将有／无全反式维甲酸处理过之 NB4 细胞置入嵌入式培养之上层舱，下层舱中则置放有A549 细胞或各种不同处理的条件培养液，再将上层舱嵌入下层舱中，於含 5% CO2 之培养箱中共同培养。

The sewage flows from pool to plant, passing through retention reservoir to adjust PH value, into removing ammonia with temperature increasing to 20℃,into UASB reactor with temperature increasingto 35℃ to remove off COD and ammonia under the function of anaerobia, then into SBR reactor to remove BOD under the function of aerobia. When the biochemical disposal is completed, the processed sewage will come into the UF system to remove adsorbed solid, organic matter, bacteria, and pathogens in waterand finally come into the RO system to remove off dissolvable salinity, colloid, organic matter, and microbe in water.

垃圾渗滤液经储存池进入污水处理厂，经调节池调整PH值，经1#加热器升温到20℃进入氨吹脱塔脱氨氮，再经2#加热器升温到35℃进人UASB生物反应器，在厌氧菌的作用下降解COD和脱氮，再进入SBR生物反应器，在好氧菌的作用下降解BOD，完成生化前处理后转入UF超滤中空纤维膜系统进行分离处理吸附固体、有机物、细菌、病原体等；最后经高压泵送入进口的RO返渗透中空纤维膜系统中，进行分离处理可溶解盐分、胶体、有机物、微生物等。

objectiveto explore the application of carpometacarpal superficial vein graft in the digital replantation.methodthirty cases hospitalized in our hospital from january 2004 to october 2008 were dealed with vessel defect in the digital replantation by carpometacarpal superficial vein graft.resultsthe replanted fingers all survived,the appearance and function were good.conclusionusing carpometacarpal superficial vein graft is a good way to deal with vessel defect in the digital replantation.

目的：探讨腕掌侧浅静脉移植在断指再植中的应用。方法：对30例患者采用腕掌侧浅静脉移植处理断指再植手术中的血管缺损。结果：再植手指均成活，外观和功能良好。结论：对于断指再植中血管缺损的处理采用腕掌侧浅静脉移植是一种很好的方法。

It\s needed to do more data processing such as inside and outside boundaries recognition, facular radius compensation, scanning and path planning to generate process control data. The STL file should be translated into CLI file, then into SMP file. In order to satisfy with the request of initial system, I inject some new arithmetic in the transformation, including inside and outside arithmetic and processing compensation arithmetic.

从三维建模到切片处理，再到扫描处理，最后得到层片的扫描路径文件，其中需要对截面轮廓进行诸如内外轮廓识别、工艺补偿、扫描及加工路径规划等一系列的工艺数据处理，文件的转化过程为从 STL 文件到层片文件，再到加工路径文件，为了满足制作化学芯片的一些特殊要求，在转化过程中加入了一些新的算法，内外边界识别算法和工艺补偿算法。

Then the experimental rats were treated with posthepatic manipulative bleeding or IH-VC manipulative bleeding at 10 min after reperfusion. RESULTS: MDA concentration in SH-VC elevated obviously with time and peaked at 10 min after reperfusion. Two percent of body weight posthepatic manipulative bleeding with blood transfusion at 10 min after reperfusion significantly decreased circulating MDA, ALT and AST levels and improved survival rate.

结果：HIR时SH-VC血中MDA的含量随时间的延长逐渐升高，并在再灌注后10min达到高峰，并且再灌注后0、5和10min 3个时段，SH-VC内MDA的含量明显高于IH-VC内的含量；2% SH-VC放血输血处理组血清MDA的含量明显低于未处理组，处理后6h血清ALT和AST的含量都显著低于未处理组，并且生存率明显提高达7d左右。

A steel plate having a tensile strength of at least about 930 MPa (135Ksi), a toughness as measured by Charpy V-notch impact test at least about 120 joules (88 ft-lb), and a microstructure comprising at least about 90 volume percent of a mixture of fine-grained lower bainite and fine-grained lath martensite, wherein at least about 2/3 of said mixture consists of fine-grained lower bainite transformed from unrecrystallized austenite having an average grain size of less than about 10 microns and comprising iron and specified weight percentages of the additives: carbon, silicon, manganese, copper, nickel, niobium, titanium, aluminum, calcium,rare earth metals, and magnesium, is prepared by heating a steel slab to a suitable temperature; reducing the slab to form plate in one or more hot rolling passes (10) in a first temperature range in which austenite recrystallizes; further reducing said plate in one or more hot rolling passes (10) in a second temperature range in which austenite does not recrystallize, quenching (12) said plate to a suitable quench stop temperature (16); and stopping said quenching and allowing said plate to air cool (18) to ambient temperature.

一种钢板，其抗拉强度至少约930MPa135ksi），在－40℃（－40°F）下，采用夏氏V型缺口冲击试验测定的韧性至少约120焦耳（88英尺－磅），并且其显微组织包含至少约90％体积的细晶粒的下贝氏体和细晶粒的板条马氏体的混合物，其中该混合物的至少约2／3由从平均粒径小于约10微米的未再结晶奥氏体转变而来的细晶粒的下贝氏体组成，而且，其中所述的钢板包含铁和特定重量百分比的添加元素：碳、硅、锰、铜、镍、铌、钛、铝、钙、稀土金属和镁，所述钢的制备过程为：将一钢板坯加热至一个适当的温度；在奥氏体可发生再结晶的第一个温度范围内，采用一个或多个热轧道次（10），将所述板坯轧制成板材；在奥氏体不发生再结晶的第二个温度范围，采用一个或多个热轧道次（10）进一步轧制所述板材；将所述板材淬火处理（12）至一个适当的淬火终止温度（16）；停止所述淬火处理并将所述板材空冷（18）至室温。

Stress of Cu and Cd reduced the amounts and remobilization rate of pre-anthesis stored assimilates and total amount of pre-anthesis stored assimilate.

其中，以Cu_2、Cd_2处理对叶片花前贮藏物质再运转量和再运转率的影响最大，Cu_3、Cd_2处理对茎鞘和颖壳花前贮藏物质再运转量和再运转率影响最大。

This invention discloses an IC phone communication method based on the FSK mode including: loading and transmitting ciphered sequences, ciphered card information, called number information and other interaction information between an IC terminal and a process platform in the mode of FSK information, in which, the platform authenticates the authority and charges, if the deduction at the IC terminal is correct, then it sends signals of anti-stealing making phone calls periodically to the platform, which differentiates the correctness of the signals, if they are wrong, it releases the call, when the communication is finished and the calling rings off first, the platform receives the identification signals of the ring-off of the calling to cut off the call of the called side and release the voice channel between the platform and the called side, then processes balance information and releases the call finally.

本发明公开了一种基于频移键控方式的IC卡电话通信方法，其主要方案是IC卡终端与处理平台之间通过FSK信息方式承载和传输加密序列、加密卡信息、被叫号码信息及其它交互的信息，由处理平台进行鉴权和计费；如果IC卡终端扣费正确则周期性向处理平台发送防盗打信号，处理平台鉴别防盗打信号的正确性，如果错误则释放呼叫；当通信结束后主叫先挂机时，处理平台收到主叫挂机标识信号后首先切断被叫侧的呼叫，释放处理平台与被叫侧之间的话路，然后再进行余额信息的处理和最后释放呼叫。使用本发明提出的方法，使得IC卡终端与处理平台之间的信息交互流程更加简单、清晰，提高了信息交互效率，并能及时释放话路，节约中继资源。

But we don't care about Battlegrounds.

但我们并不在乎沙场中的显露。

Ah! don't mention it, the butcher's shop is a horror.

啊！不用提了。提到肉，真是糟透了。