使结晶

When NiTi alloy was tensiled at 600 ℃ and at a lower strain rate, the dynamic recrystallization occurred. Without electric field the stress-strain curves were characterized by periodical undee graph, while under the electric field they presented steady state. When deformation under the electric field, both strain hardening and recrystallization take place simultaneously, thus the flow stress curves exhibits steady state.

NiTi合金高温拉伸变形过程中会发生动态再结晶，在应变速率较低时其应力-应变曲线呈周期性波浪形，在应变速率较高时其应力-应变曲线则呈现较平滑稳定的态势；施加电场作用时抑制了这种周期波浪形变化，使应力-应变曲线呈平滑稳态变化。

Following this information, many approaches to degrade the glass transition temperature and crystalline of polymer electrolyte, such as linear copolymers based on PEO, comb polymers with short pendent solvating chains, network polymers and so on, are performed to obtain polymer electrolytes in an amorphous form stable at room temperature.

因而，使高分子接上柔性PEO支链、嵌段共聚、轻度交联、共混等降低结晶度和玻璃化温度的通用手段，成为提高高分子固体电解质室温电导率的重要途径。

Moreover, the crystallinity of PP and PP/nucleators are reduced by ultrasonic irradiation.

此外，超声辐照使PP及PP／成核剂体系的结晶度呈下降趋势。

By applying ultrasonic wave to different PP/nucleators system, crystalline structures of PP are changed.

静态超声作用使PP及PP/成核剂体系的结晶行为发生了显著变化。

The unique wire-bending system uses a piezo-electric crystal to control the position of the forming tool while the coil is being formed.

当这种线圈形成时，独特的弯曲金属丝使系统用一颗压力的结晶控制形成的工具的位置。

The method comprises: adding 4-(3,4-dichlorophenyl)-1-tetralone and solvent at a ratio of 1:(3-4) into a three-necked flask with a stirrer, heating under stirring until 4-(3,4-dichlorophenyl)-1-tetralone is completely dissolved, heating to 60-100 deg.C, refluxing for 0.5-2 h, cooling the filtrate to -5-10 deg.C, filtering, recrystallizing to obtain refined 4-(3,4-dichlorophenyl)-1-tetralone, and drying at 40-80 deg.C to obtain dry 4-(3,4-dichlorophenyl)-1-tetralone.

该方法的步骤是：在带搅拌的三颈瓶中依次加入4-(3，4-二氯苯基)-1-萘满酮和溶剂，溶剂与4-(3，4-二氯苯基)-1-萘满酮的L∶W为3～4∶1，将上述4-(3，4-二氯苯基)-1-萘满酮及混合精制溶剂搅拌下升温，使4-(3，4-二氯苯基)-1-萘满酮全部溶解，升温至60～100℃，回流0.5-2h；滤液用冰水冷却至-5～10℃，过滤，所得物料再用上述方法进行一次重结晶得到精品4-(3，4-二氯苯基)-1-萘满酮，40～80℃干燥后即得到干品4-(3，4-二氯苯基)-1-萘满酮。

The results showed that when PA1010 was filled with 1.5% n- SiO2, the properties of the coating was best .The coating-substrate adhesion stress was 28.9 MPa . The self-strength of the coating was 69.8 MPa. DSC analysis shown that n- SiO2 could increase the crystallization speed of PA1010 coatings obviously.

结果表明：当复合涂层配比为m(PA1010)：m(n- SiO2)=100.0： 1.5时，复合涂层综合性能较佳，涂层自拉伸强度为69.8 MPa，涂层与基体结合强度为28.9 MPa；纳米SiO2有明显的异质成核作用，使复合涂层的过冷度由27.0 ℃下降为24.0 ℃；纳米SiO2能够显著提高涂层的力学性能，有助于提高复合涂层的结晶速率，具有明显的成核作用。

The Polynosic fiber is a kind of high performance modified viscose fiber. It maintains the fine moisture absorption and chromatophilicity of cellulosic fiber; on the other hand it possesses high break force, modulus, especially in wet state, which contributes to its high crystallinity and orientation.

Polynosic纤维是一种高性能改性粘胶纤维，它一方面保持了纤维素纤维优良的吸湿易染性，另一方面其较高的结晶度和取向度使其强力和模量尤其是湿态强力和模量与普通粘胶相比有了很大的提高。

The results show that the growth rate of tetrapod ZnO is controlled by spiral growth and its crystallization is via VLS model. The condensation of tiny zinc droplets in zinc vapor is the key factor of the formation of tetrapod ZnO. The growth steps are formed on the terminated faces as zinc diffuses outwards and the elongation of whiskers continues until zinc inside the droplets is depleted. VS crystallization, which has little effect on the elongation growth, takes place on side faces of the whiskers and consequently makes the whiskers radius increase.

结果表明： T-ZnO晶须的结晶作用是气-液-固方式，晶须生长受螺旋生长机理控制；锌蒸气中产生凝聚生长的锌液滴是制备T-ZnO晶须的关键，锌从液滴内向外扩散在晶须的端面产生生长台阶，随着液滴内的原子向外不断扩散，针体部分就不断地伸长生长，当液滴内的原子全部消耗尽时，晶须便不再发生轴向生长；气-固方式的作用主要是促进晶须棱面生长而使晶须变粗，对轴向生长几乎没有影响。

The motivating goal of his work was to enable easy implementation of language extensions, custom code optimisations, and non-intrusive augmentation of the reused code (some of these ideas crystallised later into what is known today as aspect-oriented programming).

他的工作激励的目标是使语言扩展，自定义代码的优化便于实施和非侵入性增强的代码重用（其中一些意见，结晶成就是所谓今天面向方面编程后）。&/页&

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。