使均匀

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

DO NOT MIX THE METHOXIDE IN A PLASTIC SOFT DRINK BOTTLE AS THE NaOH ATTACKS THE PLASTIC AND YOU WILL QUICKLY BE SHAKING A BOTTLE FULL OF HOLES WITH METHOXIDE GOING EVERYWHERE.

不要混合甲醇盐在一个塑料的软饮料瓶，因为氢氧化钠会腐蚀塑料软硬料瓶，同时你需要快速摇晃饮料瓶使甲醇和氢氧化钠混合均匀。

The lab findings show, the no-blemish copper deposition can be realized through selective copper deposition in trench. In the process of electro-plating, via and crevice come into being due to the misproportion of the current density inside and outside the trench.

在电镀的条件下，凹槽电镀铜产生空洞和缝隙原因是凹槽内外电流密度分布不均匀，使凹槽内外镀层生长速度不一致，最终导致空洞和缝隙形成。

Jin Shui HighSPEED Mill Power Producing System can make the differdnt molal structures mate rials powderfor 20 eyes to 80eyes in common temperaeure, These materials are differdnt kinds of soft hard PVC 、PP、PS; thosecan change its nature such as PP、TEP、 PS、 PA、 PC ,etc; non-plastic such as dee rhm, timber, leather and palm oil shells, etc,Especially suit for raw material of plastic to chang its naure, paints of mother colour tofill up , paints, tec .During the working process, firstly put the quantitative and well-distrib uted rawmaterialsun to the Moll Box by the Hopper, them put the powder out of the Moll box by Auto loader, finallysirfand retrieve the powder through sifting machine .If someofthe have not milled well , you can do itagain As a matter of fact, it will be as excellent as the mew plastic and can keep every normof the munchang eablein their function of chemistry and physicsafterusing about 30% of power mixed up with 70%raw mate rials of plastic. So the machines if helpful of plastic businessman to save money and good for protecting our environ mentathe same time

金穗JS 系列高精密磨粉生产系统能在常温下将各种的软硬：PVC、 PP 、PS 及改性PP 、PS 、PA 、PC 等不同分子结构的及非塑料类如（鹿角、木梢、皮革及棕油壳等）材料磨制成20目~80目粉末状，适合塑料原料改性，色母料填充涂料、塑纺织的涂料、地毯背面涂料、制药等加工行业，这些颗粒原料通过定量的加料器均匀地送进磨箱中，再由吸风机将磨好的粉末吸出磨箱经过筛选机筛选回收，如较粗的颗粒再次被送进磨箱中进行粉磨，这些材料经过我们特殊改良刀齿，创新突破来配合日新月异原材料组合使用，经塑料制品厂商实践证明在其产品原料中加入磨制粉体30%左右使其更好塑化且其制品的化学，物理性能保持全新料的各项指针不变，因此是塑料厂商降低成本且同时有利于保护环境的粉磨回收设备。

In Shui HighSPEED Mill Power Producing System can make the differdnt molal structures mate rials powderfor 20 eyes to 80eyes in common temperaeure, These materials are differdnt kinds of soft hard PVC 、PP、PS; thosecan change its nature such as PP、TEP、 PS、 PA、 PC ,etc; non-plastic such as dee rhm, timber, leather and palm oil shells, etc,Especially suit for raw material of plastic to chang its naure, paints of mother colour tofill up , paints, tec .During the working process, firstly put the quantitative and well-distrib uted rawmaterialsun to the Moll Box by the Hopper, them put the powder out of the Moll box by Auto loader, finallysirfand retrieve the powder through sifting machine .If someofthe have not milled well , you can do itagain As a matter of fact, it will be as excellent as the mew plastic and can keep every normof the munchang eablein their function of chemistry and physicsafterusing about 30% of power mixed up with 70%raw mate rials of plastic. So the machines if helpful of plastic businessman to save money and good for protecting our environ mentathe same time

S 系列高精密磨粉生产系统能在常温下将各种的软硬：PVC、 PP 、PS 及改性PP 、PS 、PA 、PC 等不同分子结构的及非塑料类如（鹿角、木梢、皮革及棕油壳等）材料磨制成20目~80目粉末状，适合塑料原料改性，色母料填充涂料、塑纺织的涂料、地毯背面涂料、制药等加工行业，这些颗粒原料通过定量的加料器均匀地送进磨箱中，再由吸风机将磨好的粉末吸出磨箱经过筛选机筛选回收，如较粗的颗粒再次被送进磨箱中进行粉磨，这些材料经过我们特殊改良刀齿，创新突破来配合日新月异原材料组合使用，经塑料制品厂商实践证明在其产品原料中加入磨制粉体30%左右使其更好塑化且其制品的化学，物理性能保持全新料的各项指针不变，因此是塑料厂商降低成本且同时有利于保护环境的粉磨回收设备。

In the depth surpasses in 10 meter deep well nitrogenation oven technique of manufacture, applied the multi-link graduation to enter the ammonia active nitrogen atom weaken compensation method, caused the nitrided uniformity distinct enhancement.

在深度超过10米的深井氮化炉制造技术中，应用了多环分级进氨气活性氮原子衰减补偿法，使氮化均匀性明显提高。

In this paper,a new method is proposed for synthesizing arbitrarily desired pattern for linear geometry array with nonisotropic elements, and with nonuniform spacing between elements.

提出一种综合具有任意需要方向图的包含非各向同性和非均匀间隔的线性阵列的新方法。该方法的基本思想在于将综合问题转变为一个半无穷维二次优化模型：在一组线性泛约束条件下使权矢量的范数最小。

The conventional SHPB technique is improved by using a pulse shaper. Pulse shapers technique is used to modify the incident wave and decrease the effect of wave dispersion to ensure stress equilibrium and homogeneous deformation in specimen, and furthermore a constant strain rate is attained during the loading history. The lasting time of acceleration pulse is enhanced to numerable MSEL, which is more close to actual loading.

本文改进了传统的霍普金森压杆技术，采用波形整形技术，改变加载波形，获得了比较光滑的入射波，降低了波的弥散效应，保证实验时火工品试样中的应力平衡和均匀变形，得到了更接近常应变率的动态加载条件，使加速度脉冲持续时间t提高数倍，更加真实的反映了火工品实际加载环境。

Results showed that, pyrolin had obvious action on two species of fungi, and the antifungal effect was positively correlative with concentration. The EC50 was 0.4076 mg/mL and 0.4626 mg/mL respectively after cultured 3 days. The main antifungal period was the fast growth period of fungi, and lead to it lag behind. Observation under SEM revealed that pyrolin caused a series of marked morphological and structural alterations of hyphal. These changes included mutual adhesion of mycelium, the hyphal was irregular in diameter, local denting, some of mycelium was broken, disruption of cell wall, outbreaking of inner cytoplast, and the empty cavity appeared. As a result, pyrolin restrained the growth of these fungi.

结果表明，鹿蹄草素对上述两种真菌均具有明显的抑制作用，抑菌效果与浓度呈正相关，培养3d时的EC50分别为0.4076、0.4626 mg/mL；抑菌时期主要是在真菌的快速生长期，使其快速生长期滞后；扫描电镜显示，鹿蹄草素作用下菌体形态发生异常变化，表现为菌丝体之间相互粘连，菌丝粗细不均匀，细胞壁破裂，局部凹陷，部分菌丝断裂，大量内容物外溢，出现空腔等现象，从而发挥其抑菌作用。

When the coverage is increased,the aspartic acid molecules can finally form an overlayer with uniform contrast but could never form any ordered structures.

随着覆盖度的提高，天冬氨酸分子最终在Cu(0 0 1)表面形成一均匀衬度的吸附层，但并不形成有序吸附结构，也不能使台阶发生小面化。

Recall that, in the Kolmogorov axiomatization, measurable sets are the sets which have a probability or, in other words, the sets corresponding to yes/no questions that have a probabilistic answer.

延期开工的Kolmogorov宣布要衡量所有套职能有限许多坐标限制在于衡量子寅。换句话说，如果是/否的问题回答f可看的价值观念在许多最有限坐标，然后它有一个概率的答案。

The experimental results showed that the algorithm can filter singular points and remain fixity of the target edge.

实验表明：基于模糊理论的图像智能滤波方法比常规图像滤波方法运算量小，它既能去除奇异点，又能保持图像中目标的边缘不变性，具有很好的滤波效果。