使向后

Sb can combine with Cu and P to form a low melting point compound which lowers the melting point of binary Cu-8P eutectic alloy by nearly 200℃. Bi and Cu can create compounds with low melting point(270℃) distributing at the boundaries and that is the reason why the melting point of (Cu-8P)-Bi is lower than that of binary Cu-8P eutectic alloy. The eutectic cluster can be refined with the addition of Fe, and that is the reason why the addition of Fe can decrease the melting point of Cu-8P alloy. Two means of decreasing the melting point of Cu-8P are found.

一定量的Sb与Cu， P形成低熔点相，从而大幅降低了Cu-8P合金的熔点，使其熔点降低近200℃；加入少量Bi后， Bi与Cu在共晶团晶界上形成熔点为270℃左右的低熔点化合物，且Bi的加入明显细化Cu-8P合金共晶团，从而使Cu-8P合金的熔点降低；加入Fe能明显细化Cu-8P合金的共晶团，使层片间距由8μm减为2μm以下，并使共晶团由层片状向短棒状转变，虽然Fe与Cu形成熔点为806℃的高温相，但Fe的细化作用使得Cu-8P合金的熔点降低，但降低幅度不大。

During the beginning （about 3-5 seconds） of operating "Compress" key for oil cylinder handspike to move downwards, push the trash feeding door or pull the main door, hydraulic oil cylinder handspike stops immediately,"Compress" light goes out, discontinuous ringing arises, and the screen shows "Breakdown"; reset the door, the ringing stops, and the screen shows "Compress"; after hydraulic oil cylinder handspike automatically returns to the original place, indicator light "Compress" goes out.

在操作"压缩"键使油缸推杆向下运动后的最初时间内（约3-5秒），推动垃圾投入门或拉开大门，液压油缸推杆立即停止运动，"压缩"显示灯灭，产生缓慢间歇讯响，显示"故障"；门恢复后，停止讯响，显示"压缩"，液压油缸的推杆自动回到原始位置后，指示灯"压缩"灭。

We used ITO glass substrate and high purity（99.99%） titanium , put to use sputtering process, add to high purity O2 make it complete the best structure film and the thickness about 1400 . By way of 500℃ anneal could got a better anatase phase, this result could easy reaction with electrolyte to increase electron-transferred. Used as spin casting covering PR on ITO substrate, transferring patterns of array circular shapes on a mask to photography, used optimize temperature and time to hard bake. Finally used HCl to etching underexposed TiO2 area, and acetone to tripper top PR, make it to accomplish pillars shape TiO2 electrode.

本研究使用ITO玻璃基板为底材在以高纯度钛(99.99%)为靶材，利用溅镀方式通入纯氧使其行成高纯度TiO2镀於ITO基板上行成厚度约1400的薄膜，且经500℃高温烧结使其行成最强的锐钛矿结晶相，此晶相有利於与电解液反应进而增加电子的转移，提升太阳能电池最佳的效率，在以旋转涂布方式铺上光阻，以矩阵排列的圆孔光罩曝光、最佳的温度及时间来烘烤、显影后；使用盐酸以等向性湿蚀刻方式蚀刻未曝光之TiO2区域，最后利用鈵铜将最上层光阻去除，使其行成柱状TiO2的电极。

As a result of the thixotropism innovativeink, so that the ink rollers being under business card printing and membership card making machine after rotation, increases the flow of ductibility, making it easy to transfer ink; when the ink through cards and membership cards make transfer to paper, lost the role of epigene, innovativeink from sprasely to thicken and not to form good around the torrents.

由于油不朱的触变性，使油不朱在不朱辊上施到制卡和会员卡制息机的动弹功用后，会增不小固定性，补充延展性，使油不朱便当迁徙；当油不朱经制卡和会员卡制息迁徙到纸张后，因获得了边辛的功用，油不朱由密变密而不向边际流溢，变不败精良的痕迹。

The expression of AT2R gene can be regulated efficiently in vivo by local delivery of MSC with dual-stable expression of AT2R gene, thus reduces the formation of intimal hyperplasia.④AT2R gene can influence the expression of ECM and significantly promote the cellular apoptosis in the injury rat carotid artery.⑤These data demonstrate the clinical potential of AT2R regulatable expression to prevent restenosis after PCI.

研究结论：(1)与VSMC直接接触可以诱导MSC向血管成分细胞分化；(2)构建的Dox-on可调控的MSC细胞株诱导活性可靠，使外源AT2R基因的表达处于有效的主动控制下；(3)局部导入MSC不影响球囊损伤后大鼠颈动脉新生内膜增生；(4)由MSC介导的AT2R可调控表达受到Dox的良好调控，可有效抑制球囊损伤后大鼠颈动脉新生内膜增生；(5)AT2R影响血管损伤后修复时ECM成分的表达，并促进细胞凋亡的发生，可能是AT2R介导抑制新生内膜形成的机制。

The simulation results shows that when the hydroforming for real axle housing needs two bulge processes and the specific value of the two bulge ratio is about 1, the result is the best one; To obtain an appropriate route of loading force need adjust internal pressure and axial compression force for many times and according to the failure, the size of the two forces which has been mentioned can be rapidly and rationally adjusted; Because of good greasing conditions influencing largely, reducing the friction between tube blank and die inside surface as well as possibly not only makes more materials flow into the bulge area but effectively diminishes the axial compression force; The good or bad characteristics of tube blank material is also one of the decisive factors and when material is selected, we first consider its' formability.

模拟结果表明，当后桥壳需要两次进行胀形，两次胀形比比值约等于1时，胀形结果最好；合适的加载路径要经过多次调试，能根据胀形缺陷对内压力和轴向力的大小进行迅速地合理调整；良好的润滑环境对后桥壳液压胀形的影响巨大，要尽量减小管坯与模腔内壁的摩擦力，不但使更多的材料流入胀形区，而且能有效的降低轴向力的大小；管坯材料性能的好坏也是影响胀形的决定性因素，选材时首先要考虑材料的成形性。

Not only are they designed in a novel style, these new materials are also post-processed by multifunctional technique, so they are characteristic of the functions of protecting against water, oil and contamination. Apart from being the perfect materials for summer wears, nightgowns and casual wears, they can also be used for curtains, watch bands, insteps, as well as high-grade household fabric.

这些高档面料设计新颖，同时在后整理加工时采用多功能整理技术，使防水、防油、防污等多功能面料问世，除了可制作夏季服装、睡衣、休闲服外，还可以制作窗帘、高档家纺面料、表带、鞋面等，使产品从原来单一作为服装面料向其他多功能面料方向发展，使消费者从根本上克服对丝绸产品的厌倦心理。

The ceo of thedhgate ,wang shutong ,is the perfect example of the ambition and action.after gratuation she worked as a teacher in qinghua university,which was envied by others.but she was not satisfied with the comfortable life.her tough will resulted in her enjoying the challenge.after two years,she resigned and left the henhouse,and manged to be employed by microsoft ,flied in the sky.she broke through all restraint and found her own area.ever since she warned herself she must be on the ground,modest and donot aim too high .six years of hard work made her the employee who promotes fastest among the colleaguesand the youngest department manger.however, it was the beginning of her dream .when everyone thought she would work continually she resigned again.which was decided after consideration.her dream was to start her own business.with the dream driving,she undertook to set up the dhgate.in the beginning the life was so difficult that many things were waiting for her,but she didnot move backand faced the difficulties.

敦煌网首席执行官王树彤就是抱负与实践完美结合的典范。毕业后留在清华任教的她让旁人羡慕之极，但自己却并不满足安逸的生活，坚韧的意志力铸就她生性喜欢挑战。两年后，她毅然辞职，离开鸡舍，过五关斩六将闯入外企微软，飞向了天空。理想与实践使她冲破世俗的禁锢，找到了自己天空。进入微软后，她告诫自己要脚踏实地，谦虚谨慎，不要好高骛远。六年的踏实苦干使她成为同期进入微软而升职最快的人，且是中国最年轻的部门经理。然而这只是王树彤梦想的开始，当所有人都认为她会继续留在公司发展的时候，她辞职了，但绝不盲目。因为她知道自己的梦想是创业。终于在梦想的驱使下，她再一次付出了果敢的行动创办了如今的敦煌网。创业初期异常艰难，有很多很多琐碎的事情要自己做而且有很多很得困难需要自己去解决，但她并没有退缩，而是迎难而上。

Based on the characteristics of parameterized design and key technologies of knowledge based engineering, and specially according to the characteristics of the construction, figure, assembly-parameter of bicycle frame design, the article has achieved repeated using of experiential parameter and knowledge by adopting methods such as automatic reading experiential datasheet, computing parameter by making use of program, manual data-input or modifying and so on. Based on analyzing the characteristics of Rear End design and the associated characteristics with Chain Stay and Seat Stay, different design methods are analyzed in detail, and rapidly assembling of Rear End, Chain Stay and Seat Stay is achieved by using the method of combining top-down-assembly with down-top-assembly method. Based on analyzing special technologies and UDF characteristics, the repeated using of different sectional shapes by using UDF technology on the tube section design is also achieved, and this will greatly shorten the time spent on fixing the dimensions and orientations on sketches.

在探讨了参数化设计技术特点和知识工程关键技术的基础上，针对自行车车架设计中的结构、形状、装配参数特点，分别采用了读入经验数据表、参数程序求解、手工录入或修改方法实现车架设计经验参数和知识的重复利用；在分析自行车后叉片设计特点及与平、立叉的关联特性的基础上，对不同的设计方案进行了详细分析，并采用自顶向下和自底向上相结合的方法，实现了后叉片的快速装配定位与平、立叉设计相关联；在分析了特征技术和UDF特点的基础上，将UDF用于管件截面的设计上，使各种截面形状能不断重复利用，大大节省了约束草图尺寸和位置的时间。

China accounting bookkeeping has gone through the initial phase, primitive phase (including single-entry and double-entry orderly in time),recent phase (i.e.phase in which bookkeeping-method of China style was reformed) and modern phase.

840年鸦片战争后新的环境使中国会计记账思想经历了一次磨难，曾一度被人轻视，改良中式簿记法的推行者们使之获得新生，形成了与西式簿记并存的近代阶段；新中国成立后，中国会计记账思想在与借贷记账的冲撞和交流中，逐渐与之接近乃至融合，最终完成了中国会计记账思想向现代化的转化。

We have no common name for a mime of Sophron or Xenarchus and a Socratic Conversation; and we should still be without one even if the imitation in the two instances were in trimeters or elegiacs or some other kind of verse--though it is the way with people to tack on 'poet' to the name of a metre, and talk of elegiac-poets and epic-poets, thinking that they call them poets not by reason of the imitative nature of their work, but indiscriminately by reason of the metre they write in.

索夫农 、森那库斯和苏格拉底式的对话采用的模仿没有一个公共的名称；三音步诗、挽歌体或其他类型的诗的模仿也没有——人们把&诗人&这一名词和格律名称结合到一起，称之为挽歌体诗人或者史诗诗人，他们被称为诗人，似乎只是因为遵守格律写作，而非他们作品的模仿本质。

The relationship between communicative competence and grammar teaching should be that of the ends and the means.

交际能力和语法的关系应该是目标与途径的关系。