位置参数

The filled skutterudite compound possesses bcc structure as evidenced by electron diffraction analysis. Powder X-ray diffraction data of filled skutterudite samples were characterized by Rietveld method for some crystallographic parameters such as lattice constant, atomic occupation, atomic position, etc.

另外，通过对化合物电子衍射的分析证实了〓化合物是一种具有bcc结构的化合物；运用Rietveld方法对填充skutterudite化合物X衍射谱线进行了分析，对化合物的晶格常数、原子位置的占有率以及原子位置坐标等晶体学参数进行了表征。

Thus it provides a theoretical basis for design and adjustment of refector antenna, particularly the modified Cassegrain antenna.

一、引言在反射面天线系统的设计中，相位中心的位置是一很重要的参数，因为它决定了馈源在反射面夭线系统中的相对位置，优选馈源的相位中心是提高夭线增益，控制旁瓣和交叉极化电平的有效手段。

The element equations are derived in a fixed current element coordinates which are coincident with the current moving element coordinates. The perturbed moving element coordinates and the variation of the element nodal rotation parameters corresponding to the perturbation of element nodal displacements and rotations referred to the current fixed element coordinates is consistently determined using the first order linearization of the way used to determine the current element coordinates and element nodal rotation parameters corresponding to the incremental element nodal displacements and rotations referred to the global coordinates.

本研究在梁元素当前的变形位置上，利用元素节点的座标及断面方位建立一个移动元素座标并决定元素节点的旋转参数，对应於元素节点旋转参数扰动量的广义节点力为一广义力矩，为推导传统力和力矩与该广义力矩的关系，本研究在一个与当前的移动元素座标重合的固定元素座标上，推导出元素节点在当前固定元素座标的扰动位移和扰动旋转与元素节点旋转参数的扰动量的关系。

Since the lengths of the line segments and the angles between line segments are treated as representation parameters, it is convenient to construct energy function and to deal with displacement and length constraints. Based on this advantage, a parametrical model for human body is proposed, which can easily produce human body models with different feature sizes. The above method is just suitable for polylines. Therefore, a generic deformation method for both discrete curves and surfaces is presented. The energy function is constructed by analyzing the relationship of the points before and after deformation. Together with the displacement constraints, the deformation problem is converted to a convex quadratic programming. A necessary condition for constraint points and a sufficient condition for the uniqueness of solution are given. The proposed method can be combined with skeleton-driven animation to control the deformation.

将线段长度与线段之间的角度作为表示参数，既有利于能量函数的构造，又便于处理位移约束和长度内蕴约束条件，利用这一优势，将其应用于三维人体的参数化建模，可以方便地产生具有不同特征尺寸参数的人体模型，由于这种方法只适用于折线变形，具有较大局限性，因此，本文进一步提出一种较通用的离散曲线曲面变形方法，通过分析变形前后的位置关系来构造能量函数，再加上位移约束条件，将变形问题转化为一个凸二次规划问题，并且给出了约束点应满足的必要条件及模型解唯一的充分条件，这种方法还可以与骨架驱动变形的思想相结合，能更好的控制变形。

Redundant driving structure designed based on a new type of universal Cartesian serial-parallel manipulator, kinetics equations and Euler equations constructed, complete analysis of each jointed points of the moving platform carried out, inverse kinetics solution can be obtained with the given parameters, which include the position and orientation of the manipulator, applied force on the output shaft, parameters of motion of output shaft and connecting bar and sliding block, computer programming adopted to get the valid data and its figure, thus found the perfect show of this redundant driving structure compared to the primary mechanism without redundant driving.

对全新结构的万能直角串并联机构进行冗余驱动设计，通过建立动力学万程和欧拉方程，对机构的动平台各输入铰点处的受力状况进行了全面的分析，已知机构在给定空间位置和姿态下的输出端的受力、主轴的运动参数、连杆的运动参数、水平和垂直运动滑块的运动参数时，可以反向求解机构约动力学反解，通过计算机语言编程计算和绘图得至（直观有效的结果数据，由此得知冗余驱动在改善原机构的动力学特性方面的良好表现。

Function parameters, such as ablation location and ablation priority, can be output from the ANN to suggest which locations in the heart need ablation and a priority for providing ablations for those locations.

诸如消融位置和消融优先级的功能参数可以从ANN中输出，以建议心脏中的哪些位置需要消融以及为这些位置提供消融的优先级。

The nephelauxetic parameter, bonding parameter and covalency parameter are calculated according to the location of the PA peaks in NdF〓, Nd〓.H〓O and Nd〓〓.

根据NdF〓、Nd〓。H〓O和Nd〓〓的谱峰位置，计算了它们的电子云重排参数β、键合参数b〓和Sinha共价参数δ。

On the basis of the masteries for the aluminum oxide ore pulp drying and calcination, a mathematical model was developed for simulating the process of heat transfer and the calcination of two-phase flow in a new type furnace designed by Zhongzhou Branch Company, China Aluminium Corporation Limited. The fields of velocity, temperature and pressure of the two-phase flow and the reaction time were gained by optimizing calculation under the condition of different operational parameters and geometric parameters. The effect of vent position velocity and atomization particle diameter on the drying and calcination technology of aluminum oxide ore pulp was discussed.

在了解氧化铝矿浆干燥、烧成工艺及设备的基础上，针对中国铝业股份有限公司中州分公司开发的一种新的氧化铝矿浆干燥和烧成炉，建立了矿浆干燥、烧成炉内气固两相流的流动传热以及烧成过程的数学模型，就干燥、烧成炉运行参数及各几何参数进行优化计算，得出了炉内气固两相流动的速度场、温度场、压力场以及颗粒干燥和烧成反应时间，并分析讨论了喷口位置、喷口速度、颗粒雾化粒径等参数对氧化铝矿浆干燥、烧成工艺的影响。

Force strength brand DCC800 parameters Serial program unit technical parameters 1 KN8000 clamping force 2 mm760 clamping trip 3 mould thickness (minimum - most mm400-950) 4 template size mm1400 level x x 1395 5 LinZhu elder brother mm910 910 from within 6 elder brother LinZhu mm180 diameter 7 booster shot force (KN665 8 mm760 trip shot materials 9 hammer mm80 diameter, 90, 100 10 shot Kg7.2 feed, and 9.1 11.2 11 casting Mpa132.8, 1.01, 85 12 casting cm2600 area, 760, 940 13 biggest casting 40Mpa area (cm22000) 14 shot cm2mm - 250 Kg/position 15 punch out mm297 distance 16 ejection chamber flange diameter mm200 17 ejection chamber flange plate height mm20 set out 18 top KN315 output 19 the mm180 trip 20 Mpa14 work pressure system 21 KW37 motor power 22 tank L1200 volume 23 machine Kg39400 weight 24 machine envelop dimensions by 2010 mm8

请可以把下列技术参数翻译成英语？力劲牌 DCC800参数序号项目单位技术参数 1锁模力KN8000 2 锁模行程 mm760 3模具厚度mm400-950 4模板尺寸mm1400×1395 5哥林柱内距mm910×910 6哥林柱直径mm180 7压射力KN665 8射料行程mm760 9锤头直径mm80、90、100 10 射料量 Kg7.2、9.1、11.2 11铸造压力Mpa132.8、104.9、85 12铸造面积cm2600、760、940 13最大铸造面积（40Mpa）cm22000 14压射位置Kg/ cm2mm-250 15冲头推出距离mm297 16压射室法兰直径mm200 17 压射室法兰凸出定板高度mm20 18顶出力KN315 19顶出行程mm180 20 系统工作压力Mpa14 21电机功率KW37 22油箱容积L1200 23机器重量Kg39400 24机器外型尺寸mm8660×2010×2780

The lift course of hanging device on wheat no-tillage planter was simulated by using the software of ADAMS. Some important parameters were obtained such as height of the working part relative to ground, the distance between the working part and the rear wheel of tractor, the angle of road pass and the force of hanging point, etc. The key parameters of the hanging device and its best working parameter of hanging device were found out through optimization simulation. Simulation results showed that suspension point had minimum force when variable DV_1 and DV_2 gained corresponding maximum and minimum at scope of structure limit.

应用ADAMS软件对小麦免耕播种机悬挂机构提升过程进行了动态仿真，得到了工作部件的位置高度、工作部件与拖拉机后轮之间的间距、路面通过角以及悬挂点的受力等参数，找到了悬挂机构的关键参数，通过优化仿真，得到了悬挂机构的最佳工作参数，仿真结果表明，设计变量DV_2、DV_3在结构受限范围内分别取其最大值和最小值，悬挂机构悬挂点受力最小。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。