乳化

Seven Stars colloid mill principle of work full sound of something astir grinding pan tooth profile incline relative motion but becomes, high speed revolves, another static causes the material to receive the enormous shearing force and the friction force through tooth profile incline between material, at the same time and so on under the complex strength function causes the material for the fluid ultramicron smashing, the emulsification, the disperser, isotropically at the high frequency vibration and the high speed whirlpool, to stir and so on the function, may replace and surpass the stone mill, the sand blast machine, the ball mill, the breast is uniform machine, cuts the mulser, three rollers machine, organizes working efficiency and so on the stamp mill.

该公司共有 5 条同类产品信息。多功能胶体磨，胶体泵，乳化分散泵七星胶体磨可干燥两式运转先进机械，其工作原理充分动静磨盘齿形斜面的相对运动而成，其中一个高速旋转，另一个静止使物料通过齿形斜面之间的物料受到极大的剪切力和摩擦力，同时又在高频震动和高速旋涡等复杂力的作用下使物料为流体超微粒粉碎、乳化、分散、均质、搅拌、混合等多种功能，可代替并优于石磨，砂磨机、球磨机、乳匀机、剪切乳化机、三辊机、组织捣碎机等工作效率。

Seven Stars colloid mill principle of work full sound of something astir grinding pan tooth profile incline relative motion but becomes, high speed revolves, another static causes the material to receive the enormous shearing force and the friction force through tooth profile incline between material, at the same time and so on under the complex strength function causes the material for the fluid ultramicron smashing, the emulsification, the disperser, isotropically at the high frequency vibration and the high speed whirlpool, to stir and so on the function, may replace and surpass the stone mill, the sand blast machine, the ball mill, the breast is uniform machine, cuts the mulser, three rollers machine, organizes working efficiency and so on the stamp mill.

该公司共有 5 条同类产品信息。多功能胶体磨，胶体泵，乳化分散泵详细七星胶体磨可干燥两式运转先进机械，其工作原理充分动静磨盘齿形斜面的相对运动而成，其中一个高速旋转，另一个静止使物料通过齿形斜面之间的物料受到极大的剪切力和摩擦力，同时又在高频震动和高速旋涡等复杂力的作用下使物料为流体超微粒粉碎、乳化、分散、均质、搅拌、混合等多种功能，可代替并优于石磨，砂磨机、球磨机、乳匀机、剪切乳化机、三辊机、组织捣碎机等工作效率。

Under the optimum conditions, the lactobacillus bulgaricus microcapsule was madeby single agglomerate, and precipitated the wall with located in rapeseed oil with 50%ammonium sulfate solution; The preliminary micro-emulsion filtrated, then drawsome microcapsule from the micro-emulsion and progressing the second emul-sification, injecting a mixture with 3% CAP and 1.5% gelatin into the micro-emulsion,and keep the stirring speed 200r/min for 5 minutes, adjusting pH as 3.0 with aceticacid, then desiccating with the spray drier after 30 minutes. At last, got the prodtictof microcapsule powder.

通过最佳乳化条件制备的乳液，采用单凝聚法制备保加利亚乳酸杆菌微胶囊，用50％硫酸铵溶液，使菜籽油中的壁材CAP析出，形成初步的微胶囊，过滤，取上层微胶囊油液，缓慢注入3％CAP和1.5％明胶混合液中，进行第二次乳化，在200r／min的搅拌速度下乳化5min，用冰醋酸调节乳液的pH值至3.0，固化30min，取乳液置于喷雾干燥机中进行喷雾干燥。

Objective To evaluate the application of impulse mode in the early stage of phacoemulsification.Methods Set impulse frequency at6-10/second when emulsifies the nucleus in150eyes.of131cases Linearly control the phaco power.Then analysis the phaco power,elapsed time and complication in three phases by turns.

目的 探讨脉冲乳化方式在超声乳化术初期阶段的应用方法对131例150眼白内障在乳化晶状体核时选用脉冲频率6～10次/s，线性控制能量，依序分三阶段进行分析所用超声能量、乳化时间以及并发症情况。

In order to get the microcapsule which enwraps high success ratio of lactobacil-lus, we need developed a new emulsification method which can protect the activity oflactobacillus during the spray drying process. Firstly, rapeseed oil was used as adispersion medium when water was emulsified in the initial period, the concen-tration of emulsification were: CAP:3%, Tween-20:0.05%, Span-80:2%, glutin: 1.5%,mechanical stirring speed:900r/min,and the emulsification temperature was 37.5℃.

在制备用于微胶囊的保加利亚乳酸杆菌中，首先以菜籽油为分散介质，在初步的乳化条件中，最佳的乳化条件为：邻苯二甲酸醋酸纤维素的浓度为3％、表面活性剂Span-80的浓度为2％、Tween-20的浓度为0.05％、明胶的浓度为3％、搅拌速度为900 r／min、乳化温度为37.5℃。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

As a kind of important raw material of protein,effects of high intensity pulsed electric fieldson the functional properties of egg albumen were studied.Results showed that solubility of egg albumen decrease when the pulsed electric fields intensity is more than 35 kV/cm.Emulsibility,foam capacity and hydrophobicity of egg albumen increase with the increase...

结果表明：蛋清蛋白的溶解度在脉冲电场强度大于35kV/cm时下降；蛋清蛋白的乳化性、起泡能力、泡沫稳定性及疏水性先随脉冲电场强度增加而增大，但当脉冲电场强度大于30kV/cm后，蛋清蛋白的乳化性、起泡能力、泡沫稳定性及疏水性下降；随着脉冲电场数的增加，蛋清蛋白的溶解度、乳化性、起泡能力、泡沫稳定性及疏水性变化不显著。

The effects of gelatin concentration, emulsion stirring speed, emulsion temperature, emulsifier and cross-linking agent on particle size distribution, were investigated.

研究了影响微球粒径的多种因素，包括明胶溶液浓度、乳化搅拌速度、乳化温度、乳化剂和固化剂。

Formation mechanism of micro-emulsion fuels is studied systematically. It isconsidered that necessary condition for biodiesel-ethanol-water micro-emulsion is thathydrogen bond effection of hydrophilic groups in biodiesel and emulsifier and hydroxyl ofethanol on water is no less than corresponding Laplace pressure gradient.

系统地研究了生物柴油-乙醇-水微乳化燃料的形成机理，认为形成生物柴油-乙醇-水微乳化燃料的必要条件是生物柴油和乳化剂所有亲水基和乙醇的羟基通过氢键作用于水的力不小于相应的拉普拉斯压力梯度。

The subject of the mechanism-based emulsion formulated based on the theory, the ratio in the emulsion is to use part of the Venturi tube by high-speed water pipes in their place to produce negative pressure to suction up oil ratio of the working principle, and the higher degree of automation systems, the emulsion with the concentration can completely meet the "Coal Mine Safety Regulations" requirements.

本课题在基于乳化液配制机理的理论基础之上，在乳化液配比部分是利用通过文丘里管的高速水流在其喉管处产生负压将油吸上来的工作原理进行配比的，该系统自动化程度较高，所配乳化液浓度完全能够满足《煤矿安全规程》要求。

Singer Leona Lewis and former Led Zeppelin guitarist Jimmy Page emerged as the bus transformed into a grass-covered carnival float, and the pair combined for a rendition of "Whole Lotta Love".

歌手leona刘易斯和前率领的飞艇的吉他手吉米页出现巴士转化为基层所涵盖的嘉年华花车，和一双合并为一移交&整个lotta爱&。

This is Kate, and that's Erin.

这是凯特，那个是爱朗。