乙烯

The title nano-sized polymeric microgels were synthesized by emulsion polymerization method,using divinyl benzene as crosslinking agent and methyl methacrylate,hydroxyl ethyl methacrylate,butyl acrylate as monomers.

通过乳液聚合的方法，以二乙烯基苯为交联剂，用甲基丙烯酸甲酯、甲基丙烯酸-β-羟乙酯、丙烯酸丁酯等丙烯酸酯类单体合成纳米尺寸的聚合物微凝胶粒子。

Results showed that the monomer conversion increased slightly in the presence of the crosslinking agents The size of particles decreased slowh as the amount of cmsslinking agent increased.and the size distribution of the particles broadened at a higher amount of cmsslinking agent Divinyl benzene was more effective than ethyl glycol dimethyl methacrylate to make polymer crosslinked.During alkali treatment process,void latex particles can be obtained when no DVB or less than 0.5 wt％ of EGDMA was used,while muhihollow structure was generated when DVB or more than 1.0 wt％ of EGDMA was introduced.The volume expansion of the particles decreased with increasing the amount of emsslinkirlg agents.

结果表明，体系中加入交联剂后，单体转化率都有不同程度的提高；随交联剂用量的增加，乳胶粒粒径略有减小，交联剂用量较高时，乳胶粒粒径分布加宽；二乙烯基苯的交联效率稍高于双甲基丙烯酸乙二醇酯；不加入交联剂及EGDMA用量低于0.5%时，处理后乳胶粒呈空腔结构，加入DVB及EGDMA用量高于1.0%时，处理后乳胶粒呈多孔结构，并且乳胶粒体积增量随交联剂用量的增加而减小。

A Product main business categories: chemical solvents white oil, toluene, xylene, durene, valitin water, acetate, D resin, acetone, butanone, cyclohexanone , anti-white water, dichloromethane, trichloroethane, trichlorethylene, loose water-saving washing network water, open water, wash water, and days that water, rust agent, to water-logging, washing machine water, decontamination water, n-butyl alcohol, isopropyl alcohol, ethanol, industrial alcohol, car-washing water, washing machine water, clean lines of water, cleaning machine water, fire water, paint remover, fungicides, antifreeze water, chloroform, grinding fluid , diluent, release agent, dehydration agent substantial industrial solvents.

主要经营产品 A类：化工溶剂白电油、甲苯、二甲苯、四甲苯、凡立水、乙脂、丁脂、丙酮、丁酮、环己酮、防白水、二氯甲烷、三氯乙烷、三氯乙烯、松节水、洗网水、开油水、洗面水、天那水、除锈剂、去渍水、洗枪水、去污水、正丁醇、异丙醇、乙醇、工业酒精、洗车水、洗机水、抹线水、抹机水、火水、脱漆剂、杀菌剂、防冻水、哥罗仿、研磨液、稀释剂、脱模剂、脱水剂等大量工业溶剂。

Three components of peroxide in the activator amongwhich have the different decomposed temperatures made the Vinyl-ester resinsolidified heat discharge increased that gained a bigger solidified degree. Theactivator-adopted quantity can dramatically affect the casting samples performance:eg. When use 1.0-1.4 portions of activator, the casing sample can reach its maximumTensile strength and Bend strength; when use more activator, the polymeric meshworkcontracted which embrittle the casing sample and reduce the dynamic performance; Inthe Pultrusion processing, when CF composed of about 60vo1%, more demould agentcan bring the better processing but degrade the CFRP, normally use around 1.2 portion.

采用具有不同分解温度的三组分有机过氧化物引发剂，乙烯基酯树脂的固化反应放热量增加，固化程度提高；引发剂用量对浇注体的性能影响很大，在用量为 1.0~1.4 份时，浇注体拉伸强度剂弯曲强度达到最高，过多的引发剂使聚合网络减小，浇注体变脆，力学性能降低；在拉挤成型工艺中，碳纤维的体积含量一般为 60%左右，脱模剂增加使加工性能好转但会使复合材料性能下降，一般用量为 1.2 份。

Regular vinyl addition polymers may be obtained from particularly strained endocyclic double bonds.

由带特殊张力的桥环双键可以得到规整的乙烯类加成聚合物。

Thirdly,in the view of some different results between the reaction of complexes(2)、(3)and[(Me_3Si)_2N]_3LnLi_3 with aromatic aldehydes, the reaction of 2 equiv of aromatic aldehydes with 1 equiv of lithium amide(1) catalyzed by the YCl_3 was subsequently studied,and better yields of the corresponding amides and alcohols can be isolated.These results indicated that the enolate ligand in complexes(2)、(3)may have impact on the Cannizzaro disproportionation reaction.

第三，鉴于上述配合物2、3和[(Me_3Si_2)2_N]_3LnLi_3与芳香醛反应结果上的一些差别，我们又以三氯化钇为催化剂，将两当量的芳香醛与一当量化合物1的锂盐直接进行反应，结果以较好的产率得到了相应的酰胺和醇，这说明配合物2、3中所含的乙烯醇基可能对此Cannizzaro-型歧化反应存在一定的影响。

Firstly,two novel rare earth complexes(CH_2=CHO)Ln~Ⅲ[2,6-_2PhNSiMe _3]_2Li_3Ln=Y(2,Yb(3)containing arylamido and enolate mixed ligands have been synthesized by treatment of 2 equiv of of 2,6-~iPr_2PhNHSiMe_3 with exces n-BuLi at -78℃in THF for 12h,followed by reaction with 1 equiv of LnCl_3at 80℃for 24h in one-pot.All the two compounds were characterized by spectroscopic methods,elemental analyses,and a single-crystal X-ray diffraction study.

首先，-78℃下，在两当量的2，6-~iPr_2PhNHSiMe_3(1)THF溶液中加入过量的n-BuLi，反应12小时，再加入一当量的LnCl_380℃下，反应24小时，一锅法合成了含胺基、乙烯醇基混合配体的新型稀土金属配合物(CH_2=CHO)Ln~Ⅲ[2，6-_2PhNSiMe_3]_2Li_3Ln=Y(2、Yb(3)，上述化合物结构经单晶X-ray衍射、光谱和元素分析表征，表明我们得到的是一类新型的三价稀土配合物。

METHODS: The Tecnis Z9000 silicone IOL shares the same basic characteristics with the 911A IOL including a 12.0mmoverall diameter, 3-piece equiconvex 6.0mm optic and angulated cap C polyvinylidene fluoride haptics.

Tecnis Z9000硅凝胶IOL和911A IOL具有共同的基本特征包括12mm总长度、三片直边双凸6mm的光学直径和成角的聚丙乙烯C襻。

The initiator is summarized in grafting copolymerization preparation emulsion with using starch and ethenyl monomer , each kind of initiator mechanism is commented, influence of the initiator selecting to the emulsion performance is elaborated.

总结了淀粉与乙烯基单体接枝共聚制备乳胶常用的引发剂，对各类引发剂的机理作了评述，讨论引发剂的选用对乳胶性能的影响。

The leftover from bamboo processing was comminuted into bamboo fine powder, which was surface-treaded with a coupling agent of ethenyl tri (β-methoxyethoxy) silane; and then in the presence of initiator dicumyl peroxide, the powder was compounded with styrene-isoprene block copolymer/bromobutyl rubber blend to prepare a crosslinked vibration-absorbing rubber composite material.

将竹加工的边角料粉碎并用乙烯基三硅烷偶联剂处理，再与苯乙烯－异戊二烯嵌段共聚物和溴化丁基橡胶的共混物进行复合，在过氧化二异丙苯引发剂的作用下制得交联型橡胶吸振复合材料。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。