丙烯酸

The experiment results showed that the optimum reaction condition were as follow: the molar ratio of acrylic acid to octadecyl alcohol was 1.2:1, the amounts of solid super acid and hydroquinonone were 6.0% and 0.8% respectively, reaction temperature and time were 120℃ and 3h. In this condition, the percentage of esterification of octadecyl acrylate was 97%.

由实验得出的最佳合成条件是：丙烯酸与十八醇的摩尔比为1.2：1，固体超强酸及对苯二酚的质量分数分别为6%，0.8%，反应温度为120℃，反应时间为3 h，在此反应条件下，酯的产率可达97%。

The production was further verified with IR.The experiment results showed that the optimum reaction condition were as follow:the molar ratio of acrylic acid to octadecyl alcohol was 1.2∶1,the amounts...

由实验得出的最佳合成条件是：丙烯酸与十八醇的摩尔比为1.2∶1，固体超强酸及对苯二酚的质量分数分别为6%，0.8%，反应温度为120℃，反应时间为3 h，在此反应条件下，酯的产率可达97%。

The test result showed that the pour point of Jianghan crude oil might depress from 28 ℃ to 13 ℃ when styrene∶maleic anhydride∶octadecyl acrylater was 1∶3∶3, preheated temperature of the crude oil was 60 ℃, and addition of the terpolymer was 300 mg/L.

研究表明，当苯乙烯、马来酸酐、丙烯酸十八烷基酯三种单体摩尔比为1∶3∶3，原油预热温度为60 ℃，三元共聚物在江汉原油中加量为300 mg/L时，此三元共聚物可使江汉原油的凝固点从28 ℃降到13 ℃。

In this paper octadecyl acrylate-maleic anhydride copolymer were prepared and used as compatibilizing agent of the blend system of polypropylene,starch and inorganic filler,which can be used as photo-biodegradable plastic.

采用丙烯酸十八酯-马来酸酐的共聚物作为聚丙烯(PP1330)淀粉无机填料共混体系的相容剂，制成的共混材料，代替聚苯乙烯发泡体作为可降解的一次性餐饮具。

The star shaped block copolymers were prepared by ring opening polymerization of ε caprolactone in the presence of multiarm PEG using stannous octoate as a catalyst.

以辛酸亚锡为催化剂，通过星型聚乙二醇引发ε己内酯开环聚合，制备了PEG b PCL嵌段共聚物，进一步以丙烯酸酯封端，合成了 3种水溶性大分子单体。

Linear and star-shaped hydroxy-terminated polys were synthesized by reacting L-lactide with co-initiators such as poly,hydroxyethyl methycrylate,trimethylolpropane,mannitol and sorbierite in the presence of stannous octoate as catalyst.

以辛酸亚锡为催化剂，分别以聚乙二醇、甲基丙烯酸羟乙酯、三羟甲基丙烷、季戊四醇、甘露醇和山梨醇等和L-丙交酯反应，得到末端为羟基的线形和星形聚L-丙交酯。

The star-shaped block copolymers were prepared by ring-opening polymerization of ε-caprolactone in the presence of multiarm PEG using stannous octoate as a catalyst.Based on these star-shaped PEG- b -PCL,soluble macromers terminated with acrylate groups were synthesized.

以辛酸亚锡为催化剂，通过星型聚乙二醇引发ε-己内酯开环聚合，制备了PEG- b -PCL嵌段共聚物，进一步以丙烯酸酯封端，合成了3种水溶性大分子单体。

N -(4-vinyl)benzylimidazole and its copolymer with octyl methacrylatewere synthesized and characterized,and oxygen—binding properties of cabaltporphyrincomplexes with imdazole ligands were studied.

研究了 N -(4-乙烯基)苄基咪唑单体及其与甲基丙烯酸辛酯共聚物的合成与表征，以及咪唑基有机或聚合物配位体与钴卟啉络合物的氧结合性能。

In this paper,the monomers including St and BA with strong waterproof property were employed to modify the traditional PVAc emulsion,and meanwhile draw into DAAM functional monomer in the copolymer system,will prepare out cross linking copolymer emulsion for ADH to improve the waterproof,oilproof and dry/wet mechanical property of fuel oil filter paper.

采用具有较强抗水性的苯乙烯、丙烯酸丁酯等单体对传统聚醋酸乙烯酯乳液进行共聚改性，并在共聚体系中引入双丙酮丙烯酰胺功能单体，制备出可通过外加己二酸二酰肼交联的外交联醋丙共聚乳液，以期提高燃油滤纸的耐水、耐油性和干湿态的力学性能。

The necessity of concrete surface painting was described from the angle of durability. Based on this,the status of research and application of organosilicon coating and the kind of modified organosilicon coating were reviewed.

从耐久性角度说明了混凝土表面涂覆的必要性，在此基础上，本文综述了有机硅树脂涂料和有机硅改性聚氨酯、环氧树脂及丙烯酸树脂涂料的研究与应用进展。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。