与...相配合

His writing kept reconciliation with Augustan rule ideas,so his work automatically served Augustan rule and confirmed the theoretical fou...

他的重构与奥古斯都试图论证他的统治是建立在罗马内在的传统之上这一统治理念相一致，从这点来看，李维的写作自觉地配合了奥古斯都的统治，为罗马对世界的统治构建了意识形态方面的依据。

The drying process of chrome liquor was studied. The structure and property of chrome complex reducing by alcohol were analysed and tokened by many present well-rounded separation and analysis methods such as IR, UV-Vis Spectrum, IEC and pH potentiometry. Application tests of chrome tanning agents were conducted and tanning methods of tanning at high pH were studied. A systematic study was conducted on high alkalinity chrome tanning agents application in leather making process and possibility of clean chrome tanning was discussed.

本文系统地研究了多种小分子醇与重铬酸盐之间的氧化-还原反应，对反应过程进行了认真的剖析；对铬鞣液的干燥过程进行了研究；用红外光谱法、紫外及可见分光光度法、离子色谱法以及pH电位滴定法等多种比较成熟的现代分离分析方法相结合，对醇还原铬配合物的结构与性能进行了分析与表征；对铬鞣剂的鞣革性能进行了应用实验，研究了醇铬鞣剂在高pH值下的鞣制方法，并就高碱度铬鞣剂在制革过程中的应用进行了系统研究，探讨了用其实施清洁化铬鞣的可能性。

The drying process of chrome liquor was studied. The structure andproperty of chrome complex reducing by alcohol were analysed and tokened by manypresent well-rounded separation and analysis methods such as IR, UV-Vis Spectrum,IEC and pH potentiometry. Application tests of chrome tanning agents wereconducted and tanning methods of tanning at high pH were studied. A systematic studywas conducted on high alkalinity chrome tanning agents application in leather makingprocess and possibility of clean chrome tanning was discussed.

本文系统地研究了多种小分子醇与重铬酸盐之间的氧化-还原反应，对反应过程进行了认真的剖析；对铬鞣液的干燥过程进行了研究；用红外光谱法、紫外及可见分光光度法、离子色谱法以及pH电位滴定法等多种比较成熟的现代分离分析方法相结合，对醇还原铬配合物的结构与性能进行了分析与表征；对铬鞣剂的鞣革性能进行了应用实验，研究了醇铬鞣剂在高pH值下的鞣制方法，并就高碱度铬鞣剂在制革过程中的应用进行了系统研究，探讨了用其实施清洁化铬鞣的可能性。

(1) The skull slot needling integrated with language training and single language training showed improvement on lingual function and neural function patients with aphasia following the apoplexy, however, the skull slot needling combined with language training group seemed more effective than the single language training group;(2) The skull slot needling treatment can obviously improve the scores in clinical neural function, and prompt the ability of speaking language expressing, accelerate the comeback of audition comprehension, enhance the ability of iterance, quicken the reading speed and improve the veracity of reading;(3)The comeback of lingual function can be benefit for the intercourse between patients and doctor and family numbers, can build up the self-confidence of conquerring diseases, can cooperate with doctors, all these factors can affect morbid curative effect and prognosis.

（1）颅针加语言训练与单纯语言训练对中风失语患者的语言功能听理解、复述、说、阅读、出声读、抄写、描写方面、语言功能提高率和临床神经缺损均有改善作用；而颅针加语言训练组疗效优于单纯语言训练组；（2）颅针加语言训练治疗中风失语患者可改善临床神经功能、提高口语表达能力、促进听理解障碍的恢复、复述能力的提高、使文字阅读速度的加快及准确率的提高；（3）语言功能的恢复有助于患者与家属及医护人员的交流，更能够增强患者治疗疾病的信心，更好地配合医护人员进行治疗，而这些均能够影响到疾病的疗效及预后；（4）颅针与语言训练相结合能优势互补，颅针参与治疗中风失语症有积极意义。

the digitized mapping technique is to combine the field data collection system with the computer assisted mapping system in surveys by computer technology.it aims to realize the information collected and processed digitally and automaticaity.the digitized mapping technique can cut short the working time,lighten the labor intensity and enhance the precision of the productions.the system consists of three parts,such as data input,data processing and data output.the survey-record digitized mapping technique is widely used in the digitized mapping working pattern.for its superiority over traditional plane-table mapping in accuracy and efficiency,the large scale digital mapping is becoming more and more popular.compared with traditional analogue mapping,digital mapping has more quality control pivotai points,and its contents and methods are more complex.with the appearance of new technology gps ,the coordinate of different levels controlling points may be surveyed in high precision and it has been applied widely in topographic survey.the operation process of gps electronic tachometer is introduced and its application in topographic survey is br

计算机应用论文，计算机论文， rtk ，全站仪，数字测图，地形测量， gps论文摘要：数字测图是在测量工作中利用电子计算机技术将野外数据采集系统与内业机助制图系统相结合，其目标是实现信息采集处理的数字化、自动化、信息化。数字测图可以缩短作业时间，减轻劳动强度，提高成果精度。数字测图系统主要由数据输入、数据处理和数据输出3部分组成，数字测图作业模式中测记式数字测图应用最为广泛。大比例尺数字测图正以其测图精度高，成图速度快等优势逐步的取代传统的，以平板仪为主的模拟测图。与传统的模拟测图相比，数字测图的质量控制关键点更多、内容与方法更为复杂。gps 新技术的出现，可以高精度并快速地测定各级控制点的坐标，在地形测量中已得到广泛地应用。本文介绍了gps 配合全站仪的作业流程，简要阐明了其在地形测量中的应用。在利用实测数据成图的过程中，解决一些常见的问题，并给出解决的办法及依据，同时给出一些有益的结论，以适应实际使用的需要。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

It studied many factors such as blank holder pressure, anti-pressure, clearance between punch and bottom die, and parameters of dentiform on blank holder, analyzed the influence of these factors' change to stress and strain field in distortion area and the appearance of shear crack, summarized the appropriate ratio of blank holder pressure and anti-pressure, and the best range of other factors.

从压边力、反压力、相对冲裁间隙、压边圈齿形参数等各种因素出发，分析了这些因素的变化对于变形区应力应变场与剪切面裂纹产生的关系，并得出了压边力与反压力的合适配合比例，以及其他参数的正确取值范围。

The chelating ability of its enolate anion (TTF-ph-tfac) has been investigated with [MIICl_2·xH_2O] (M = Zn and Co) leading to complexes Zn(TTF-ph-tfac)_2(CH_3OH)_2 (7) and Co(TTF-ph-tfac)_2(CH_3OH)_2 (8), where the metal center is coordinated by two TTF-ph-tfac ligands. This redox active ligand shows promising features for the elaboration of hybrid organic-inorganic building blocks.

具有反铁磁行为的化合物5在110-120K观察到了相转变的发生，是目前已报道的该类化合物中最高的相变温度。3、TTF-ph-tfac烯醇阴离子具有很强的配位能力，与金属氯化物螯合配位分别生成了配合物Zn(TTF-ph-tfac)_2(CH_3OH)_2 (7)和Co(TTF-ph-tfac)_2(CH_3OH)_2 (8)，每个中心金属都桥连两个TTF-ph-tfac配体。

The aim of this work is to simultaneously identify the major impurities, it's concentration and optical isomers in MA samples. Gas chromatography/mass spectrometry with selected ion monitoring was employed after drugs were derivatized with--α-methoxy -α-phenylacetic acid.

本实验的目的，就是利用气相层析质谱仪配合化学对掌性衍生剂--α-methoxy-α- phenylacetic acid，以选择性离子侦测模式来进行分析，检测甲基安非他命中所残留的麻黄素与伪麻黄素的含量与旋光性。

Do you know, i need you to come back

你知道吗，我需要你回来

Yang yinshu、Wang xiangsheng、Li decang,The first discovery of haemaphysalis conicinna.

1〕 杨银书，王祥生，李德昌。安徽省首次发现嗜群血蜱。