不同形状

The difficulty of the task in chopstick-using test has changed with thepicked-objects changing its size,shape and text.In general,middle size is theeasiest one,the wooden-text is much easier than the beans,the cube is easier thanthe ball,and the hyacinth bean is the hardest one for all the subjects.

不同的任务情境对个体的技能表现有明显的影响，被挟取物体的大小、形状、质地构成了不同的任务难度，对被试来说：中等大小的物体最为容易，质地为木质的物体比豆类物体容易，而形状为方块的物体比圆球、扁豆形状容易，扁豆形的物体最难。

It is shown that Mn and Ti had refined the microstructure,and formed to precipitation affluent of Mn or Ti ,which approved the performance of the Shape Memory Alloy.For a certain strain,the shape memory effect vayied functionly together with the aging time:alloy performance the best coorperative status that the martensite lathing was close and ordered,the precipitation rich of Mn and Ti dispersed orderly in the microstructure and little or even no eutectoid phase had precipited in the alloy ,in a special aging temperature and time. With the prolonger of the aging time,the different aging time affects the microstructure rulely.

结果表明：Cu-Al-X系形状记忆合金中，Mn和Ti的加入细化了组织，并且形成了富Mn和富Ti相，起到沉淀强化和弥散强化的作用；对于同一种变形量，合金在母相时效时，形状记忆效应随时效保温时间呈现规律性变化，不同时效温度下，合金对应一个不同的时效时间，此时合金的显微组织呈现最佳自协作状态，马氏体板条细密有序，富Ti和Al相均匀的弥散在组织中，合金中没有或很少有共析相出现，且随着时效时间的延长，在不同的特定温度下，Cu-24Al-3Mn-2Ti合金的组织会有规律性的变化。

It is shown that Mn and Ti had refined the microstructure, and formed to precipitation affluent of Mn or Ti, which approved the performance of the shape memory alloy. For a certain strain, the shape memory effect varyied functionly together with the aging time: alloy performance the best coorperative status that the martensite lathing was close and ordered, the precipitation rich of Mn and Ti dispersed orderly in the microstructure and little or even no eutectoid phase had precipited in the alloy, in a special aging temperature and time. With the prolonger of the aging time, the different aging time affects the microstructure rulely.

结果表明：Cu-Al-X系形状记忆合金中，Mn和Ti的加入细化了组织，并且形成了富Mn和富Ti相，起到沉淀强化和弥散强化的作用；对于同一种变形量，合金在母相时效时，形状记忆效应随时效保温时间呈现规律性变化，不同时效温度下，合金对应一个不同的时效时间，此时合金的显微组织呈现最佳自协作状态，马氏体板条细密有序，富Ti和Al相均匀的弥散在组织中，合金中没有或很少有共析相出现，且随着时效时间的延长，在不同的特定温度下，Cu-24Al-3Mn-2Ti合金的组织会有规律性的变化。

Theequivalence percolation resistance law is accurate enough to be used in productivitycalculation of horizontal well pattern.(3) Productivity of mixed well pattern of horizontalwell or multilateral horizontal well and vertical well is constructed and formulae are simpleenough to be used in the oilfield. The patterns include 5-spot pattern,7-spot pattern and9-spot pattern.(4) Productivity formula of united rectangular well pattern of horizontaland vertical wells is constructed. By this formula, the calculation results show that fora horizontal well length, there is a shape factor at which the productivity of the patternis biggest. So optimum method of the well pattern is proposed.(5) A new concept ofdimensionless length of horizontal well is advanced and the relationship of optimum shapefactor of the rectangular well pattern against dimensionless length of horizontal well ispresented. The influences of length of the horizontal well, area of the well pattern unitand the thickness of reservior are concerned.

利用该公式计算表明：当水平井长度一定时，存在一个最优井网形状，使得水平井的产能最大，在此基础上提出了水平井井网的优化方法；(5)提出了水平井无因次长度的概念，给出了联合井网最优井网形状因子与水平井无因次长度的关系式，并对水平井长度、油层厚度及井网面积对产能的影响进行了分析；(6)推导出了一无限水平井井排在XY 平面内势的解析解，为不同水平井整体开发井网或水平井和直井井网整体开发渗流理论的研究奠定了理论基础；(7)建立了交错式水平井与直井整体开发渗流理论，给出了拟三维条件下井网产能的精确解析解及该井网最优井网形状因子与水平井无因次长度的关系，并对产能的影响因素进行了分析；(8)建立了水平井与水平井正排列井网、交错排列井网条件下渗流理论及井网产能在拟三维条件下的精确解析解，给出了交错井网条件下最优井网形状因子与水平井无因次长度的关系，通过与正方形井网对比，说明优化井网可大幅度提高开采效果；(9)建立了分支水平井和直井面积井网水油两相非活塞驱替条件下渗流问题的解析解，给出了见水前后无因次产量与无因次时间的关系式以及见水时间等。

On the rhombohedron face {1011}, Dauphine twinning showed different shapes of etching pits between individuals, because rhombohedron positive form {1011} and negative form {0111} appeared on both sides of twin partition line, while Brazil twinning showed symmetry plane between the irregular triangle etching pits of individuals. On the trigonal prism section 11(average20, Dauphine twinning showed different shapes of etching pits between individuals, because trigonal prism positive form {1120} and negative form {2110} appeared on both sides of twin partition line, while Brazil twinning should show symmetry plane between the ellipse or quadrilateral etching pits of individuals, which was not observed.

菱面体{1010}面上存在道芬双晶处，道芬双晶双晶缝合线两端分别是菱面体正形、菱面体负形出露处，导致蚀坑形状不同；菱面体{1011}面上存在巴西双晶处，不规则三角形蚀坑形态的方位关系为对称面关系；三方柱切面{1120}面上存在道芬双晶处，道芬双晶双晶缝合线两端分别是三方柱正形、三方柱负形出露处，导致蚀坑形状不同；三方柱切面{1120}面上存在巴西双晶处，椭圆形或四边形蚀坑方位应为对称面关系，但实验中未见到。

In this article, we have been investigated that synthesizing and properties of shape memory polyurethane. The shape memory polyurethane was synthesized from PCL diol, MDI(4, 4'-diphenylmethane diisocyanate) and BDO (1,4-butanediol) in this experiment. We analyzed that the effect of differential mole ratio of monomers to synthesized SMPU. Besides, the various concentrations of Nano-silver were mixed with SMPU. Mechanical properties and shape memory behavior of SMPU nanocomposite films were investigated.

本研究目的为藉由改变4，4'-二苯甲基二异氰酸盐(4，4'-diphenylmethane diisocyanate， MDI)/聚己内酯二元醇(polycaprolactone diol， PCL diol)/1，4-丁二醇(1，4-butanediol， BDO)等不同莫耳比制备形状记忆型聚氨基甲酸酯(Shape Memory Polyurethane， SMPU)；并探讨改变不同单体莫耳比及添加不同浓度奈米银溶液对其物性及形状记忆性的影响。

Result:The stomatic density and characteristic of leaf epidermis and stem epidermis in six Ephedra species was differenc,there were no ob...

结果：6种麻黄属植物之间气孔密度、茎、叶表面特征存在不同程度的差异；气孔表现出典型旱生植物的特征，略下陷，气孔保卫细胞被厚的角质层覆盖，并形成突起状角质唇状物；气孔大小、形状在种之间无明显区别；叶表面、茎表面气孔均属于无规则型，但形状明显不同，前者主要呈长方形或六边形，后者为窄条形或哑铃形。

Analysis is made on block effect to cutters of PDC bit with 3 factors: different top shape,cutter-distributing and wearing degree.By the interaction(radial range and altitude difference of each cutter) of three adjacent cutters,the cutter block is further analyzed with these factors,but wearing degree is simplified to be considered as the cutters vertical to the assembling plane.

中文摘要：对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系（不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差）来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。

According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。

Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS

And Pharaoh spoke to Joseph, saying, Your father and your brothers have come to you.

47：5 法老对约瑟说，你父亲和你弟兄们到你这里来了。

Additionally, the approximate flattening of surface strip using lines linking midpoints on perpendicular lines between geodesic curves and the unconditional extreme value method are discussed.

提出了用测地线方程、曲面上两点间短程线来计算膜结构曲面测地线的方法，同时，采用测地线间垂线的中点连线和用无约束极值法进行空间条状曲面近似展开的分析。