不同地

At present,the different indicators of nutritional assessment reflect the different characterist...

故临床应针对不同病人采用不同的评价方法或指标，以客观和有所侧重地评价病人的营养状况，为实施营养干预提供依据。

Peculiarities in the works of art are like those in the human figure; it is by them that we are cognisable and distinguished one from another, but they are always so many blemishes, which, however, both in the one case and in the other, cease to appear deformities to those who have them continually before their eyes.

艺术作品中这些特殊的东西，通常体现在人物的塑造中，使我们能够识别和区分不同的人物。虽然我们捕捉的东西总是很不完整，难于辨识不同的情况，但当我们不断地观察，这种残缺就会完整起来。

This thesis also compared the competitory capacity of Ningbo port with Qingdao port, and analyzed the present situation of crude oil transfer of Ningbo Port Group, then take the process of "swot" to sammarized the advantage and disadvantage of the Groups crude oil transfer. According to the analysis of competitor-Qingdao port, this thesis proposes that Ningbo port should make a clear blueprint confirming its aims, selection and location of the market, and the Port should take different operational strategies of either cooperation or competition with different competitors accordingly, so as to accomplish and solidify its position of the biggest crude oil transfer harbor nationally and also an important base for product oil transfer in eastern part of China.

还对宁波港和青岛等港的原油中转竞争力进行了比较分析，分析了宁波港集团原油中转的现状，然后通过SWOT方法归纳总结了宁波港中转原油的优势与不足，根据竞争对手情况和宁波港自身的分析，有针对性地确定宁波港集团拓展原油中转业务的目标、市场选择和市场定位，并针对不同的竞争对手，采取合作、竞争不同的经营战略并实施，最终实现巩固宁波港全国最大原油中转基地和华东地区重要成品油中转基地之目标。

Accordingly, reasons for the different effects of FDI on macro-economic efficiency of investment mainly including: the orientation i foreign ntroduction policy, differences in human capital, different innovation capability of compony and speed of business and market process.

相应地，各区域FDI对宏观投资效率影响不同的原因主要包括：引进外资政策取向问题、人力资本差异、企业创新能力不同和市场化进程有快有慢。

Different country and ethical culture setting are different , food is consuetudinary also differ in thousands ways, so the state banquet of each country also because of the ground because of the nation different , colourful.

不同国家和民族文化背景不同，饮食习俗也千差万别，所以各国的国宴也因地因民族而异，五彩缤纷。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

we should recognize the role of the internet dialectically and take different education measures in dealing with the three kinds of undergraduates.

对待3类不同的学生应该辩证地认识网络的作用，采取不同的教育措施。

In fact, by the way of comparative measurement to the different legislation and theory, we can find that our country is differ from some other countries, especially France and Germany; secondly, article takes a deeply research on the two basic forms of co-ownership, i.e. dividable co-ownership and undividable co-ownership.

事实上，通过对现行各国立法和理论进行初步的考察，可以直观地看到我国立法、理论和别国立法、理论的区别之处，尤其与法德等国是有明显不同的；其次，文章在第二部分深入分析了所谓共有的两种基本形态，即按份共有和共同共有，初步寻找它们的本质、功能和各自在法效果上不同之处。

The concept of using this controlled rocking with steel tendons that behave elastically and these energy-dissipating fuses is a general concept that could be applied in different materials and in different forms.

使用这种控制的钢束的弹性地晃动的行为，而这些能量耗散保险丝的概念是一个总的概念可以适用于不同的材料和不同的形式。

Recall that, in the Kolmogorov axiomatization, measurable sets are the sets which have a probability or, in other words, the sets corresponding to yes/no questions that have a probabilistic answer.

延期开工的Kolmogorov宣布要衡量所有套职能有限许多坐标限制在于衡量子寅。换句话说，如果是/否的问题回答f可看的价值观念在许多最有限坐标，然后它有一个概率的答案。

The experimental results showed that the algorithm can filter singular points and remain fixity of the target edge.

实验表明：基于模糊理论的图像智能滤波方法比常规图像滤波方法运算量小，它既能去除奇异点，又能保持图像中目标的边缘不变性，具有很好的滤波效果。