三甲基丁烷

Three alicyclic dianhydrides, 1,2,3,4-cyclobutanetetracarboxylic dianhydride, 1,2,4,5-cyclopentanetetracarboxylic dianhydride, and 1,2, 4, 5-cydohexane tetracarboxylic dianhydride were polymerized with two aromatic diamines, 1,4-bis (4-amino-2-trifluoromethylphenoxy) benzene (6FAPB, a) and 4, 4'-bis(4-amino-2-trifluoromethyl phenoxy) biphenyl (6FBAB, b) respectively, via a two-step polycondensation procedure to afford two series of fluorinated semi-alicyclic polyimides.

分别将脂环族二酐单体1，2，3，4-环丁烷四酸二酐、1，2，4，5-环戊烷四酸二酐和1，2，4，5-环己烷四酸二酐与芳香族含氟二胺1，4-双（4-胺基-2-三氟甲基苯氧基）苯(6FAPB， a)和4，4'-双（4-胺基-2-三氟甲基苯氧基）联苯(6FBAB， b)反应制备两个系列的含氟半脂环族聚酰亚胺，研究了PI薄膜的热性能和光学性能。

Ophenyl phenol,ophenyl phenol sodium salt tetrahydrate,7ADCA,2ethyl phenyl hydrazine hydrochloride,2,3dihydrofuran,7ethyl3(2hydroxy ethyl)indole,methyl ester of etodolac; 1,8diethyl1,3,4,9tetrahydropyrano[3.4b] indole1acetic acid methyl ester,5chloro2methoxy benzoic acid,4(2aminoethyl)benzene sulfonamide,5cyano phthalide,phthalhydrazide,9thioxanthenone,n[(1,4benzodioxane2yl)carboxyl]piperazine HCL,2chloro4amino6,7dimethoxyquinazoline,2chloro benzimidazole,1(4fluorobenzyl)2chlorobenzimidazole,2methylthio4pyrimidone,5amino4imidazole carboxamide HCL,6chloro2hexanone,11oxo6.11hydrodibenzothiepin,6,11dihydrodibenzooxepin11one,10,11dihydrodibenzocyclohepten5one;dibenzosuberone,dibenzo cyclohepten5one;dibenzosuberenone,3,5dihydroxy benzoic acid,3,5dihydroxy benzyl alcohol,2mercapto benzimidazole,3,4dihydroxy benzaldehyde,3,4dihydroxy benzonitrile,2amino5chloro benzonitrile,2(4chlorophenoxy)ethyl chloride,2(4chloro phenoxy)tert,butane,ditrimethylol propane;DTMP,2,2bis(4hydroxyphenyl)butane; bisphenol B,1,1'bis(4hydroxyphenyl)cyclohexane;bisphenol Z,tetrabromobisphenolS,3,5ditertbutyl salicylic acid,3,4,5trihydroxy benzoic acid stearyl ester,1,2,4trimethoxybenzene.

华业公司产品：邻苯基苯酚，邻苯基苯酚钠盐，7氨基3去乙酰氧基头孢烷酸，邻乙基苯肼盐酸盐，2，3二氢呋喃，7乙基色氨醇，依托度酸甲酯，5氯2甲氧基苯甲酸，4(2氨乙基)苯磺酰胺，5氰基苯酞，双酮酞嗪，9噻吨酮，N〔(1，4苯并二恶烷2基)羰基〕哌嗪盐酸盐，2氯4氨基6，7一二甲氧基喹唑啉，2氯苯并咪唑，1(4氟苄基)2氯苯并咪唑，2甲硫基4嘧啶酮，5氨基咪唑4 甲酰胺盐酸盐，6氯2已酮，11氧6.11二氢苯并〔b.c〕虑平，11氧代6，11二氢二苯并氧杂卓，10，11二氢二苯并环庚烯5酮，二苯并环庚烯5酮，3，5二羟基苯甲酸，3，5二羟基苯甲醇，2巯基苯并咪唑，3，4二羟基苯甲醛，3，4二羟基苯腈，2氨基5氯苯腈，2(4氯苯氧基)1氯乙烷，2(4氯苯氧基)叔丁烷，双丙烷，2，2二(4羟基苯基)丁烷；双酚B，1，1'双(4羟基苯基)环己烷；双酚Z，2[3，5二溴4(2，3二溴丙氧基)]苯砜，3，5二叔丁基水杨酸，3，4，5三羟基苯甲酸十八烷基脂，1，2，4三甲基氧基苯。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene PolymerizationFacile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that:1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明：1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体；2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene Polymerization Facile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that: 1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明： 1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体； 2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

The photocycloaddition of 1-naphthonitrile (1-NpCN) and 2,3-dimethyl-2-butene in cyclohexane or benzene gave cyclobutane 3 primarily,but that of 2-NpCN gave azetine 6 asthe major and cyclobutane 5 as the minor product in low conversion photolysis.

在低转化光解情况下，1-萘甲腈(1-NpCN)和2，3-二甲基丁烯-2在环已烷或苯中的光环加成反应主要得到环丁烷3，但2-NpCN主要得到氮杂环丁烯6和少量的环丁烷5，三氟醋酸量增加抑制1-NpCN和DMB的光环加成反应，表明TFA与基态及单激发态1-NpCN生成非光反应的复合物，它也淬灭(1-NpCN-DMB)激基复合物。

The photocycloaddn. of 1-naphthonitrile (1-NpCN) and 2,3-dimethyl-2-butene in cyclohexane or benzene gave cyclobutane I primarily, but that of 2-NpCN gave azetine II as the major and cyclobutane III as the minor product in low conversion photolysis. The photocycloaddn. of 1-NpCN with DMB is retarded by increasing amts. of trifluoroacetic acid which is shown to form non-photoreactive complexes with ground state as well as with singlet excited state 1-NpCN. It also quenches the *(1-NpCN-DMB) exciplex.

在低转光解情况下，1-萘甲腈(1-NpCN)和2，3-二甲基丁烯-2在环已烷或苯中的光环加成反应主要得到环丁烷3，但2-NpCN主要得到氨杂环丁烯6和少量的环丁烷5，三氟醋酸量增加抑制1-NpCN和DMB的光环加成反应，表明TFA与基态及单激发态1-NpCN生成非光反应的复合物，它也淬灭^*(1-NpCN-DMB)激基复合物。

The thermal behaviors of CL-20 mixed with three binders (NC+NC, PET and PBT at 160-200℃ were investigated by NBK LAWA gasometric measuring system. The thermal behaviors were described from the changes of evolved gases and decomposition kinetics. Results show that the apparent activation energies of CL-20 and its mixed systems with, PET and PBT are 176.68, 176.31, 136.12 and 127.0 kJmol^(-1), respectively.

用NBK型&拉瓦&量气测试系统研究了较高温度(160~200℃)下六硝基六氮杂异伍兹烷(CL-20)与硝化棉和硝化甘油双基吸收药、环氧乙烷与四氢呋喃共聚醚、3，3-双叠氮甲基氧杂环丁烷与四氢呋喃共聚物三种黏合剂的全分解过程，从放气规律和动力学的变化阐述了CL-20及其与三种黏合剂混合体系的热行为。

If 3 hydroxide are methylic,is agent of cross-linking of research cellulose fiber recently 3 get together cyanogen amine or 1, 2, 3, 4, butane 4 formic acid and hydroxyl are luscious the combination of organic phosphor oligomer should...

最近有探究纤维素纤维交联剂如三羟甲基三聚氰胺或1，2，3，4—丁烷四甲酸和羟基官能有机磷低聚物的联合应。。。

There are three isomeric pentene(C5H10)that yield 2-methylbutane on catalytic hydrogenation. Write structural formulas for these three isomers and indicate their relative stabilities based on the ΔH values

答：戊烯的三种同分异构体在催化加氢后可生成2-甲基丁烷，写出3个同分异构体的结构式，并依据他们的ΔH值判断出它们的相对稳定性

To economize cost of S03H-functionalized ionic liquids,extend their range of application in chemistry reaction,fifteen of ionic liquids have been synthesized by using methylimidazole,tri-alkylamine,pyridine with industrial materials 1,4-butane-sultone and 1,3-propane sultone as source in this paper.The ionic liquids were synthesized by tri-alkylamine have not been reported and yields are higher than 98%.

为了降低SO_3H-功能化离子液体的成本，使其应用范围更加广泛，本论文利用N-甲基咪唑、三烷基胺、吡啶和廉价工业级原料1，3-丙烷磺内酯、1，4-丁烷磺内酯为原料来源，合成十五种SO_3H-功能化离子液体，三甲胺为原料合成的SO_3H-功能化离子液体还未见文献报道，收率大于98%。

I didn't watch TV last night, because it .

昨晚我没有看电视，因为电视机坏了。

Since this year, in a lot of villages of Beijing, TV of elevator liquid crystal was removed.

今年以来，在北京的很多小区里，电梯液晶电视被撤了下来。