三晶

There are three main types: paraffin (used in candle s, crayons, paper coating, and industrial polishes and as a protective sealant, lubricant, insulating agent, and antifrothing agent), microcrystalline wax, and petrolatum (used in ointments and cosmetics).

一般分为三种主要类型︰石蜡、微晶蜡和石蜡脂。石蜡广泛用于蜡烛、蜡笔和工业用擦亮剂。它还用作电器的绝缘组分和用于防水木材及其它材料中。微晶蜡主要用于包装纸涂层。

This article mainly divides into three parts, The first part is the albite jade characteristic, uses traditional the gemology method conducts the research to the albite jade physical property as well as the structure, carries on the electron probe analysis to its chemical composition, and the discussion of its mineral component\'s chemical composition change carries on the SPSS statistical software; uses X powder crystal diffraction to determine its lattice parameter, mineral constituent\'s crystal structure conducts the research to the albite jade, carries on the analysis to the feldspar degree of order, and carries on the discussion to the albite jade\'s origin. The above method each other confirms mutually, confirms the data reliability.

本文主要分为三部分，第一部分为钠长石玉的性质，采用常规的宝石学方法对钠长石玉的物理性质以及结构构造进行研究，利用电子探针分析对其化学成分进行分析，并运用SPSS统计软件对其矿物成分的化学成分变化进行探讨；采用X粉晶衍射测定其晶胞参数，对钠长石玉中矿物组成的晶体结构进行研究，对长石的有序度进行分析，并对钠长石玉的成因进行探讨；上述方法彼此相互验证，以证实数据的可靠性。

Key features of our approach include the integration of nanowire and carbon nanotube sensors, precise control of the sensor temperature using the micromachined hotplates, and the use of Principal Component Analysis for pattern recognition.

江三种不同的金属氧化物奈米线与奈米碳管结合在同一个感测晶片上；2。将微机电加热板应用在感测晶片上，使得我们可以准确的控制温度；3。利用 Principal component analysis 分析所得的数据；进以得到相对应的感测图谱

There are two kinds of methods for the supramolecular organization i. e. the formation of colloid crystals and the templated assembling. Two dimensional and three dimensional superlat tices can be obtained with the colloid crystal method.

胶态晶体法是利用胶体溶液的自组装特性将纳米团簇组装成超晶格，可得到二维或三维有序的超晶格。

Respectively proceeding with bromine complexing agent of anode, modified membrane and electrolytic additive of cathode, mainly referring to specific power of battery, ratio of self-discharge and zinc dendrite, this paper has studied the influences of different anode additive and modified membrane on specific energy of battery by means of charge and discharge curves, and the influences of electrolytic additive(NH4+, OP-10, TX-10 and dodecyl trimethyl ammonium bromide) on zinc dendrite by means of current-time curve and microscopic morphology observation.

本文分别从正极溴络合剂、隔膜改性和负极的电解液添加剂入手，以电池的比能量、自放电率以及锌枝晶生长情况为主要的性能指标，用电池充放电曲线等方法研究不同正极添加剂和隔膜改性对电池比能量的影响；用电流-时间曲线以及微观形貌观察等方法研究电解液添加剂(NH_4~+、OP-10、TX-10以及十二烷基三甲基溴化铵)对锌枝晶生长的影响。

The aim of this research is to study the technology of photoelectric component, the high reliability process of 8 inch infrared ray absorption type of filter, and its market analysis. Filter is the key component of various optical systems. In general, color filter is fabricated by coating method. This study presents the novel method for filter fabrication by high temperature sintering of Si, B, Al2O3, and other materials. Compared with conventional filter, the absorption type of filter have more stable spectrum because of its properties of invisible light absorption.

中文摘要本研究是针对光电介面元件技术，高可靠度八吋红外线吸收式滤光片制程研究及其市场价值分析，光学滤光片为许多光学系统以及影像撷取系统不可缺少之重要元件，一般常见光学滤光片都是以镀膜方式，本实验针对矽、硼、三氧化二铝等材料以高温烧结方式制造光学滤光晶片，以材料特性吸收不可见光之光波，来得到所需光学滤光片之光谱特性，此吸收式光学滤光晶片之光谱稳定性高。

Self-fluxing Fe-Cr-Ni-B-Si alloy prowders are laser clad on medium carbon steel substrate of dimensions 80×35×10mm〓. The investigation results of this clad layer are: micro-defects, micro-cavity and occluded forin substance, are the micro-cracks and crack resourses in clad layer; crack of coating propagates along the boundary of two kinds of eutectic sutructure; The included angle θ between the cracking direction and laser scanning direction in multitrack overlapping clad is smaller than that in one-track clad because of crack propagating along crystalline growth direction and crystalline direction in overlapping zone being different from it in one-track clad.

在调质态的45〓钢表面，采用预置粉末法进行FeCrNiBSi合金的多道搭接激光熔覆，对其熔覆层进行分析表明：多道搭接激光熔覆层裂纹扩展方向与激光扫描方向间的夹角θ与单道熔覆时相比明显变小，前者θ0°，后者θ角基本都为90°，这主要是因为多道搭接时，搭接区结晶方向发生了变化以及裂纹沿结晶方向扩展所致；激光熔覆层裂纹大多是以覆层与基材交界面的孔洞、熔覆层内不同方向共晶团间的显微缩孔、夹杂物的边界等三种显微缺陷作为裂纹源，并沿低熔点物相形成元素偏析造成弱化膜的共晶团界面扩展延伸。

Refining grain behavior of the heat affected zone of E36 high strength low alloy steel was studied, when E36 steel was welded by three wires submerged arc welding with 110 kJ/cm large heat input.

研究了焊接热输入为110kJ/cm三丝埋弧自动焊E36高强度低合金钢热影响区的晶粒细化行为；用自动图像分析仪测量了焊接热影响区诱导晶内铁素体形核夹杂物的大小、分布；用透射电镜观察了具有自细化行为晶内铁素体的形貌。

BEIJING - Triple Olympic champion Guo Jingjing bagged women's 3m springboard gold at Beijing Olympics on Sunday, becoming the first-ever diver to win back-to-back Olympic individual and synchro titles.

三届奥运会金牌得主郭晶晶在周日进行的女子3米板跳水决赛中再次折桂，成为第一位在个人3米板与双人3米板跳水决赛中获得金牌的女运动员。

Triple Olympic champion Guo Jingjing bagged women's 3m springboard gold at Beijing Olympics on Sunday, becoming the first-ever diver to win back-to-back Olympic individual and synchro titles.

三届***金牌得主郭晶晶在周日进行的**3米板跳水决赛中再次折桂，成为第一位在个人3米板与双人3米板跳水决赛中获得金牌的女运动员。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。