查询词典 work flow

Air pressure differentials should be such that there is no flow of air between the work area and the external environment or risk of contamination of outer clothing worn outside the area; f an air lock system for the passage of equipment, which is constructed so that there is no flow of contaminated air between the work area and the external environment or risk of contamination of equipment within the lock.

f 设备的进出要有气闸系统，其结构要保证没有工作区和外界环境之间污染空气的流通，或气闸室里的设备没有被污染的风险。

The main work and the originality points of this dissertation could be concluded as the following parts:(1) To analyze systematically the mathematical model of LES of air flow in great space, under the case of isothermal and non-isothermal, as well as the combined action of buoyancy and strain. Some basic problems are studied about the LES application into airflow simulation of great space, such as boundary conditions, spatial difference scheme and time advancing scheme, time step etc., which creates the basis for the LES application to indoor airflow simulation.(2) Both the instantaneous and time averaged flow field of great space with multiple jets under isothermal and non-isothermal cases are explored with large eddy simulation method, and also discussed the dynamic characteristics and the law of fluidflow in the great space.(3) Based on the results of LES of the great space and the Fanger thermal comfort indexes, it is brought forward the concept of the series of dynamic thermal comfort evaluating indexes, which could be divided into thermal comfort index with time averaged properties PD, PPD, PMV, thermal comfort index with instantaneous properties IPD, IPPD, IPMV, and time averaged thermal comfort indexes TAPD, TAPPD, TAPMV, and transient situations time averaged thermal comfort indexes TTAPD, TTAPPD, TTAPMV. The differences among them and the calculation methods are discussed, and the four kinds of indexes are calculated with the thermal comfort index PD as an example.(4) Based on the LES results it is discussed the hot air stratification phenomena in air-conditioned buildings in the case with air supply and return registers on the ceiling and the case on the sidewall. The fundamentals of the hot air stratification are studied and the relations of estimating hot air stratification are brought forward.(5) With the advanced apparatus such as hot wire film anemometer IFA300 and laser particle field anemoscope, corresponding model test and site measurements have been done, which are compared with the simulation results and LES is proved a very promising method in air flow simulation indoor.

本文主要工作既创新点体现在以下几个方面：(1)系统分析了等温、非等温和考虑剪切力与浮升力综合作用的高大空间大涡模拟数学模型，并研究了高大空间大涡模拟在室内气流仿真应用中的一些基本问题，如边界条件、空间离散格式和时间推进格式、时间步长选择等问题，为大涡模拟在室内气流计算中的广泛应用打下了基础；(2)首次用大涡模拟方法研究了高雷诺数下高大空间多射流在等温、非等温情况下的瞬时流场和时均流场分布，并探讨了多射流流场的动态特性和流动规律；(3)基于大涡模拟的动态仿真结果和Fanger的热舒适指标，首次系统地提出了动态热舒适评价指标体系的概念：即基于时间平均参数的热舒适指标PD、PPD、PMV；基于瞬时参数的瞬时热指标IPD、IPPD、IPMV；基于时间平均热舒适指标TAPD、TAPPD、TAPMV；以及沿行动迹线的时间平均热舒适指标TTAPD、TTAPPD、TTAPMV，并分析了四类热舒适指标的差异性和计算方法，还以PD值为例对四类指标分别进行了计算；(4)基于数十种工况下空调房间大涡模拟的结果，研究了空调建筑上送上回和侧送侧回两种情况下热分层现象，并探讨了热分层的基本规律，首次提出了避免热分层现象的判断公式；(5)在暖通空调领域，首次使用IFA300热线风速仪、激光粒子速度场仪等先进设备，完成了与大涡模拟相对应的模型试验，并把实测结果与仿真结果进行了对比，说明LES在室内气流仿真方面是一种很有前景的方法。

First introduction whole wave commutate electric circuit of work principle, immediately after introduction the electric capacity filter the function characteristics of an electric circuit, and in the electric circuit adoption exaltation stability, exaltation temperature stability and limit flow a type over flow protection electric circuit of concrete measure with insure an electric circuit safety stability of work.

首先介绍了全波整流电路的工作原理，接着介绍了电容滤波电路的性能特点，然后引入了具有放大环节和辅助电源的串联可调式稳压电源，并在电路中采用了提高稳定度，提高温度稳定性及限流型过流保护电路的具体措施，以确保电路安全稳定的工作。

To accelerate the widespread of Synchronous Chip Seal and improve the operation quality of Synchronous Chipsealer, key techniques which influence the operation quality is studied detailedly, including the control of distributing quality, the dynamics characteristics of hydraulic system and the spray characteristics of asphalt nozzle of Synchronous Chipsealer.1 The factors which influence Synchronous Chip Seal quality are studied. Fiducial probability of simultaneous distribution density is advised to be used in evaluating the distribution bias and standard deviation of asphalt and aggregates simultaneously, which is more advanced than the single index evaluation method used before.2 The volume efficiency formula of asphalt pump is revised after analyzing the data of volume efficiency with mathematical statistics, which is helpful to match the asphalt spray system and control the flow out of asphalt pump accurately. With equation deduction and experiment, dynamic of hydraulic system used in Synchronous Chipsealer is studied, which lay the theory foundation on improving the stability and efficiency from design and controlling.4 Simulation on hydraulic system used in Synchronous Chipsealer is done with AMESim; the results indicate that multi-circle parallel connected hydraulic system with constant pressure power is better than that with load-sensing pressure power at present, because the latter will oscillate when the multi circles work at the same time. This conclusion has been proved during the debug of Synchronous Chipsealer.5 Asphalt nozzle characteristics, such as flat jet shape, flow distribution, are studied with experiment, the results indicate that cross quality of asphalt distributing is not increased linearly follow the increase of fan overlap level, the best point usually exists between two whole overlap level, asphalt distributing quality is better than±4% at the 2.5 overlap level, meets the superior specified in standard; The distribution quality of Synchronous Chipsealer can be increased by spray asphalt of different flow rang with nozzle of different diameter

为了加快同步碎石封层技术的推广，提高同步碎石封层设备的作业质量，本文对同步碎石封层设备作业质量的影响因素与控制方法、液压系统的动力学特性和沥青喷嘴的喷洒特性等关键技术进行了深入细致的研究：1研究了影响同步碎石封层作业质量的因素，提出了采用联合密度分布置信概率对同步碎石封层中沥青洒布量和碎石撒布量的系统偏差和标准差指标进行综合评价的方法，克服了传统评价方法只能对单一指标进行评价的缺陷；2采用数理统计的方法，研究了沥青泵的容积效率特性，修正了沥青泵容积效率公式，为沥青喷洒系统的匹配和沥青泵出口流量的精确控制提供了依据；采用数理方程推导与试验相结合的方法，研究了同步碎石封层设备液压系统的动力学特性，为从设计和控制的角度提高同步碎石封层设备液压系统的稳定性和效率奠定了理论基础；3运用AMESim软件对采用负载敏感控制和恒压控制的两种同步碎石封层设备液压系统进行仿真，结果表明：负载敏感控制的并联液压系统在多回路同时工作时，由于液压泵排量控制参考压力不稳定，容易引发液压系统振荡，恒压控制的并联液压系统是目前技术条件下比较理想的同步碎石封层设备工作装置驱动方案；该结论亦通过同步碎石封层设备装机试验得到了验证。4采用试验的方法对沥青喷嘴的喷洒特性进行了研究，结果表明：沥青洒布的横向精度并不是随着喷洒扇面重叠度的增加线性增加，其最高点通常出现在二个重叠度之间的"半重叠位置"，"2.5重叠"洒布时，沥青的横向洒布精度≤±4%，可以达到国家相关标准中的优级标准；同步碎石封层设备还可以根据不同洒布量情况下的流量需求，采用不同通径的喷嘴进行喷洒，提高沥青洒布精度。

For the ill conditioned load flow caused by the error produced in the transformation from electricity quantities to average power, direct current load flow and sensitivity vector are presented to find out the ill node, then by adjusting the load curve and generation curve in a certain principle, which is shown in detail with several flow charts, a new operation mode is reestablished to ensure the convergence of the calculation. Optimal multiplier method is proposed to work out the least square solution according to ill conditioned structural power network. The electricity quantities flow method enhances the reliability and accuracy of the calculation of the power transmission losses.

该方法可根据当前输电网中各个变电站24小时的电量记录，利用电量潮流计算对输电网总线损和各条线路损耗进行计算，使计算的精度满足降损措施分析和指标考核的要求；并且对于由负荷出力曲线转化成平均功率计算潮流时引入的误差，进而导致潮流计算不收敛的情况，采用直流潮流法，依据相角对有功功率的灵敏度向量判断出"网络异常点"，并且给出了解决此种情况的方法流程图；针对结构病态的电力系统潮流计算不收敛的情况，运用非线性约束优化方法中的最优乘子法求解潮流方程的最小二乘解，从而解决了电量潮流法计算理论线损时的收敛性问题，增强了该方法的适用性。

In the construction, supervising and urging the contractor to work out the detailed prospectus of construction and quality administration, carry out the material inspection and formulate the flow chart of such administrative operations for public works as stipulating the suspension and check points of construction and carrying out the management of construction progress（3）after the construction,assisting the owners to work out the flow chart of administrative operations for acceptance（4）Fulfilling the quality plan examining operations and working out the windows of construction checking procedures.

研究成果包括：（1）建立施工前，审查承包商提送资料之工务行政作业流程图（2）建立施工中，工程进度管理、材料检验及施工检验停检点查核等工务行政作业流程图（3）施工后，协助业主办理验收之行政作业流程图（4）探讨监造单位於设计阶段之困难点、业主与监造单位权责区分因素及影响监造单位审查期程之因素探讨，并研拟解决方案。

The work result showed that when the slide gate opened partially, the molten steel flow in the nozzle presented a high excursion, a circumfluence was formed under the slide gate, and a single sided percussion flow took shape in the bottom of the nozzle, and the molten steel flow was rotary at the outport of the nozzle.

结果显示：在滑板不完全开启时，水口内钢液呈明显偏流，在滑板下方区域中有回流区，并对水口底端形成单侧撞击流，使水口的出流钢液的呈旋转状流态。

Detailed work have done at four aspects as follows: the usage of SPIV in multistage turbomachinery; the study of compressor rotor tip complex flow with SPIV; the study of compressor stator tip complex flow with Rotor/Stator interaction and the detailed analysis and comparison of the unsteady flow field respectively obtained by CFD and experiment investigation.

详细本文主要以SPIV非定常实验测量和CFD非定常数值模拟为工具，研究叶轮机端壁复杂流动的一些机理性问题，围绕四个方面开展了叶轮机端壁非定常流动方面的研究工作：适用于多级叶轮机械使用的SPIV技术；压气机转子尖区复杂流动；动静叶干扰条件下压气机静子内尖区非定常流动；以及非定常数值模拟结果与非定常实验测量结果的对比。

Numerical simulations showed the axial velocity in the precessing flow were decreased significantly because of the entrainment of ambient air. The swirling motion, the wall attachment effect and the reverse flow were also found in the numerical flow field. It is shown that the simulation results of the precessing jet flow accord well with the analysis and the previous work.

数值模拟表明旋进射流的轴向流动速度衰减得很快，流场中存在明显的旋流、附壁效应和反向回流现象，所得到的结果与已有的分析结论基本吻合。

In order to study the intake air flow characteristics in four-valve diesel engines, in this dissertation hot-wire anemometer and PIV twodimension instantaneous measuring technique are used. Extensive experimental study on two intake valve exit flow fields and longitudinal section flow field in cylinder are performed for different type of diesel engines. Great researching progress have been made on the interaction between two intake ports, and the formation process of in-cylinder swirl and flow field structure of cross and longitudinal section for four valve diesel engines. These results are presented in China for the first time and without such kind of research work reported abroad as detailed and deepgoing as this dissertation. The author designs and makes a set of hot wire measuring velocity device to measure the velocity distribution around the intake valve annulus and the cross section flow field in cylinder.

为了研究四气门柴油机进气过程中气体流动的变化规律，本文利用热线测速和PIV二维瞬态测速技术，对四气门柴油机两进气门出口全圆周流速场和缸内横、纵剖面的气体流动流场进行了大量的试验研究，在四气门柴油机两进气道之间相互影响的变化规律，缸内涡流的形成过程及缸内横、纵剖面流场结构等方面取得了重大的研究进展，这一研究工作在国内尚属首次，在国外也未见有如此全面、深入的研究报道。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。