查询词典 with

The main work and the originality points of this dissertation could be concluded as the following parts:(1) To analyze systematically the mathematical model of LES of air flow in great space, under the case of isothermal and non-isothermal, as well as the combined action of buoyancy and strain. Some basic problems are studied about the LES application into airflow simulation of great space, such as boundary conditions, spatial difference scheme and time advancing scheme, time step etc., which creates the basis for the LES application to indoor airflow simulation.(2) Both the instantaneous and time averaged flow field of great space with multiple jets under isothermal and non-isothermal cases are explored with large eddy simulation method, and also discussed the dynamic characteristics and the law of fluidflow in the great space.(3) Based on the results of LES of the great space and the Fanger thermal comfort indexes, it is brought forward the concept of the series of dynamic thermal comfort evaluating indexes, which could be divided into thermal comfort index with time averaged properties PD, PPD, PMV, thermal comfort index with instantaneous properties IPD, IPPD, IPMV, and time averaged thermal comfort indexes TAPD, TAPPD, TAPMV, and transient situations time averaged thermal comfort indexes TTAPD, TTAPPD, TTAPMV. The differences among them and the calculation methods are discussed, and the four kinds of indexes are calculated with the thermal comfort index PD as an example.(4) Based on the LES results it is discussed the hot air stratification phenomena in air-conditioned buildings in the case with air supply and return registers on the ceiling and the case on the sidewall. The fundamentals of the hot air stratification are studied and the relations of estimating hot air stratification are brought forward.(5) With the advanced apparatus such as hot wire film anemometer IFA300 and laser particle field anemoscope, corresponding model test and site measurements have been done, which are compared with the simulation results and LES is proved a very promising method in air flow simulation indoor.

本文主要工作既创新点体现在以下几个方面：(1)系统分析了等温、非等温和考虑剪切力与浮升力综合作用的高大空间大涡模拟数学模型，并研究了高大空间大涡模拟在室内气流仿真应用中的一些基本问题，如边界条件、空间离散格式和时间推进格式、时间步长选择等问题，为大涡模拟在室内气流计算中的广泛应用打下了基础；(2)首次用大涡模拟方法研究了高雷诺数下高大空间多射流在等温、非等温情况下的瞬时流场和时均流场分布，并探讨了多射流流场的动态特性和流动规律；(3)基于大涡模拟的动态仿真结果和Fanger的热舒适指标，首次系统地提出了动态热舒适评价指标体系的概念：即基于时间平均参数的热舒适指标PD、PPD、PMV；基于瞬时参数的瞬时热指标IPD、IPPD、IPMV；基于时间平均热舒适指标TAPD、TAPPD、TAPMV；以及沿行动迹线的时间平均热舒适指标TTAPD、TTAPPD、TTAPMV，并分析了四类热舒适指标的差异性和计算方法，还以PD值为例对四类指标分别进行了计算；(4)基于数十种工况下空调房间大涡模拟的结果，研究了空调建筑上送上回和侧送侧回两种情况下热分层现象，并探讨了热分层的基本规律，首次提出了避免热分层现象的判断公式；(5)在暖通空调领域，首次使用IFA300热线风速仪、激光粒子速度场仪等先进设备，完成了与大涡模拟相对应的模型试验，并把实测结果与仿真结果进行了对比，说明LES在室内气流仿真方面是一种很有前景的方法。

Methods :25 cases of traumatic hydrocephalus were analysed retrospectively.Among them,3 cases showed brain contusion,4 with subrarchnoid hemorrhage,5 with subdural effusion,2 with epidural hematoma,1 with subdural hematoma,1 with fracture of skull,3 with malacia lesions,3 with cerebral infarction,and 2 with cerebral hernia.The other 3 cases were not associated,with intracranial traumatic anomaly.

回顾分析25例外伤性脑积水，其中分别伴颅脑损伤有3例脑挫伤、4例蛛网膜下腔出血、5例硬膜下积液、1例颅骨骨折、3例脑内软化灶、3例脑梗塞、2例硬膜外血肿、1例硬膜下血肿、2例脑疝(大脑镰下疝及钩回疝各1例)，另3例颅内未见外伤性异常改变与其并存。

Objective To analyze the CT and MRI manifestations of oral carcinoma,and to evaluate the value of imaging technologies in the diagnosis of oral carcinoma,thus to explore the most reasonable imaging method Methods 46 cases with oral carcinoma,proved by surgery and pathology （2 lip tumors,8 carcinomas of the gingival ridge,5 carcinomas of the buccal mucosa,24 tongue carcinomas,5 carcinomas of the floor of the mouth,2 tumors of the hard palate）,were analysed retrospectively32 cases were examined with CT and 14 cases with MRIImaging presentations were compared with surgery and pathology Results Of the 46 cases with oral carcinoma,22 were ulcerative lesion of infiltrative growth,24 were masslike lesion of extruded trowthOf the 32 cases examined with CT scan,27 were detected,5 were missed,the 4 missed cases were confirmed to be superficial ulcers by surgery and pathologyOf the 10 cases with bone destruction examined with CT scan,8 were manifested,2 were missedAnd of the 14 cases with MRI scan,all 14 were detected Conclusion CT and MRI scan are valuable for diagnosis of oral carcinomasThey can manifest the morphology and size of primary tumor,contiguous structures,bone invasion and cervical lymph node metastasisMRI is the optimal imaging method for superficial ulcerative lesion of infiltratibe growth

徐 锋，罗德红，唐威，欧阳汉，周纯武目的分析口腔癌的CT及MRI表现，评价影像检查在口腔癌诊断中的应用价值，探索合理的影像学检查方法。方法回顾性分析经手术及病理证实的口腔癌46例（唇癌2例，牙龈癌8例，颊黏膜癌5例，舌癌24例，口底癌5例，硬腭癌2例），其中32例行CT扫描，14例行MRI扫描，将影像表现与手术所见及病理结果进行对照分析。结果 46例口腔癌中，呈浸润性生长的溃疡型病变22例，外生性生长的肿物型病变24例。CT扫描32例，明确显示病变27例，遗漏病变5例，其中4例为表浅溃疡型病变。CT扫描病例中，10例有骨质侵犯，CT扫描准确评价8例，遗漏2例。MRI扫描14例，均准确评价肿瘤及其与周围结构的关系。结论 CT、MRI对口腔癌原发肿瘤的形态、大小、周围结构侵犯、颈部淋巴结转移的评价有重要价值。对于较小及呈浸润性生长的表浅溃疡型肿瘤，CT扫描尤其是CT平扫难以准确显示，应首选MRI。

Objective To analyze the CT and MRI manifestations of oral carcinoma,and to evaluate the value of imaging technologies in the diagnosis of oral carcinoma,thus to explore the most reasonable imaging method Methods 46 cases with oral carcinoma,proved by surgery and pathology （2 lip tumors,8 carcinomas of the gingival ridge,5 carcinomas of the buccal mucosa,24 tongue carcinomas,5 carcinomas of the floor of the mouth,2 tumors of the hard palate）,were analysed retrospectively32 cases were examined with CT and 14 cases with MRIImaging presentations were compared with surgery and pathology Results Of the 46 cases with oral carcinoma,22 were ulcerative lesion of infiltrative growth,24 were masslike lesion of extruded trowthOf the 32 cases examined with CT scan,27 were detected,5 were missed,the 4 missed cases were confirmed to be superficial ulcers by surgery and pathologyOf the 10 cases with bone destruction examined with CT scan,8 were manifested,2 were missedAnd of the 14 cases with MRI scan,all 14 were detected Conclusion CT and MRI scan are valuable for diagnosis of oral carcinomasThey can manifest the morphology and size of primary tumor,contiguous structures,bone invasion and cervical lymph node metastasisMRI is the optimal imaging method for superficial ulcerative lesion of infiltratibe growth

中华硕博网核心提示：徐锋，罗德红，唐威，欧阳汉，周纯武关键词：口腔肿瘤目的分析口腔癌的CT及MRI表现，评价影像检查在口腔癌诊断中的应用价值，探徐锋，罗德红，唐威，欧阳汉，周纯武目的分析口腔癌的CT及MRI表现，评价影像检查在口腔癌诊断中的应用价值，探索合理的影像学检查方法。方法回顾性分析经手术及病理证实的口腔癌46例（唇癌2例，牙龈癌8例，颊黏膜癌5例，舌癌24例，口底癌5例，硬腭癌2例），其中32例行CT扫描，14例行MRI扫描，将影像表现与手术所见及病理结果进行对照分析。结果46例口腔癌中，呈浸润性生长的溃疡型病变22例，外生性生长的肿物型病变24例。CT扫描32例，明确显示病变27例，遗漏病变5例，其中4例为表浅溃疡型病变。CT扫描病例中，10例有骨质侵犯，CT扫描准确评价8例，遗漏2例。MRI扫描14例，均准确评价肿瘤及其与四周结构的关系。结论 CT、MRI对口腔癌原发肿瘤的形态、大小、四周结构侵犯、颈部淋巴结转移的评价有重要价值。对于较小及呈浸润性生长的表浅溃疡型肿瘤，CT扫描尤其是CT平扫难以准确显示，应首选MRI。

In this serises,21 cases had facial paralysis,19 cases with suppurative labyrinthitis.3 cases with meningitis, 17 cases with periauricular abscess, 17 cases with postauricular fistula,4 cases with otogenic meningitis brain absess, 2 cases with lesion of sigmoid sinus and,1 cases with influence under temporalis,1 case with neck abscess,I case with mandible arthritis.

结果74例患者中单项并发症者62例(83.8%)，2项并发症者12例(16.2%)，并发症总计86例次：其中周围性面瘫21例次(24.4%)，迷路炎19例次(22.1%)，脑膜炎3例次(3.5%)，耳后骨膜下脓肿17例次(19.8%)，耳后瘘管17例次(19.8%)，脑脓肿4例次(4.7%)，乙状窦病变2例次(2.3%)，颞肌下感染1例次(1.2%)，颈部脓肿1例次(1.2%)，下颌关节炎1例次(1.2%)。

Results The proportion of CIN patients between the age of 30 to 39 were 80.29%,175women were histopathologically confirmed suffering with CIN, included 89 with CINⅠ,46 with CINⅡand 40 with CINⅢ;11 with cervical caucer; 308 with chronic cervicities, 96 with condyloma acuminate, 70 with polyps and 40 with others (23 Nahoth cyst, 6 endometriosis and 4 papillomas).

结果：4年来CIN的发病年龄在30-39岁的病例占80.29%。经病理确认CIN175例，包括CINⅠ89例、CINⅡ46例、CINⅢ40例；宫颈癌11例；慢性宫颈炎308例，湿疣96例，息肉70例，其它40例（包括宫颈纳氏囊肿23例，子宫内膜异位症6例，乳头状瘤4例）。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

For the first time, a screw pile and pile driver system for preventing flood and rushing to deal with an emergency was manufactured. The screw piles of the system is different from screw drills used to sap, and it doesn't push soils out. Analyses, including the screw pile's structural strength analysis and the screw blade's welding analysis, were done by ANSYS, which showed that the screw pile's structural strength is enough and that the distort of the screw blade is small. Testing on the screw pile and pile driver system showed that the system performed stably and could meet the need of preventing flood and rushing to deal with an emergency. A mechanics model of interaction of a screw pile and soil was built, and expressions of torque of screw pile's cylindrical part on the condition of screw pile's crew part being driven into soil fully were gained, then the relation of the torque with screw pitch and out diameter of cylinder, which shows the torque decreases with the screw pitch increasing, and that the torque increases with the out diameter of cylinder increasing, which was according with the experiments of the screw pile's being driven into soils, and thus a screw pile with the best structure was chosen. Experiments of bionic surface showed that, on the condition of certain pressure on the surface, the protruding bionic surface can not reduce adhesion and resistance and that the corrugated bionic surface can reduce adhesion and resistance. An orthogonal experiment of the corrugated bionic surface was done with the factors including the width of protrusion, the space between two protrusions, the trolley's velocity and the vertical surface pressure and with the surface frictional coefficient as the experimental target, and some inclusions were drawn that the best combination of the factors was acquired and that the width of protrusion affected the surface frictional coefficient remarkably.

研制了防汛抢险螺旋桩机系统，提高了沉桩作业效率；利用ANSYS对桩体进行整体结构强度分析以及螺旋叶片的焊接分析，表明桩体结构强度足够，焊接过程中，螺旋叶片的变形小；对整个螺旋桩机系统进行试验，表明该系统性能可靠，工作稳定，作业效率高，能够满足防汛抢险沉桩作业基本需要；建立了螺旋桩桩土作用力学模型，得出螺旋桩沉桩过程中螺旋桩螺旋部分完全进入土体时螺旋桩圆柱部分所受扭矩以及扭矩与防汛抢险螺旋桩的螺旋导程和圆柱外径的关系曲线，表明螺旋桩螺旋部分完全进入土体时螺旋桩圆柱部分所受扭矩随着螺旋导程的增大而减小，随着圆柱外径的增大而增大，这与螺旋桩沉桩试验结论相符合，据此优选出最佳结构的螺旋桩；仿生曲面试验表明，尺寸较小的球冠突起型仿生曲面在一定压力作用下未能起到减粘降阻的作用，而尺寸较大的波纹型仿生曲面相对平板具有一定的减粘降阻作用；以波纹型仿生曲面突起宽度、波纹型仿生曲面两突起之间间距、台车的牵引速度以及叶片表面垂直载荷为因素，以曲面摩擦系数试验指标进行正交试验，寻求出在一定试验条件下最佳因素水平组合；波纹型仿生曲面突起宽度在本试验条件下对曲面摩擦系数影响显著，而其它几个因素对曲面摩擦系数影响均不显著；通过波纹型仿生曲面突起宽度和台车牵引速度的单因素试验，表明曲面摩擦系数随着仿生曲面突起宽度的增大而减小，而随着台车牵引速度的变化基本保持不变，和正交试验结果保持一致。

Single factor experiments were done with the factors including the width of protrusion and the trolley's velocity, which showed that the surface frictional coefficient decreases with the width of protrusion increasing, and doesn't change with the trolley's velocity changing, which was consistent with the results of the orthogonal experiment. A theoretical model of the horizontal projection of a corrugated bionic surface's contact area was built, which showed that the contact area's horizontal projection decreases with width and interval increasing respectively and that the ratio of the contact area's horizontal projection and the vertical load decreases with the vertical load increasing. It indicated that the surface frictional coefficient decreases with the above three factors increasing respectively. Finite element modeling and analysis of interactions of a plate and soils was done using ANSYS, which showed that the plate frictional coefficient is little relative to soil elastic modulus and decreases with vertical surface pressure and that trolley's pull and vertical displacement of bionic surface's control pilot keep constant almost during the plate being pulled. Finite element modeling and analysis of interactions of a corrugated bionic surface and soils was done using ANSYS, which showed that surface frictional coefficient is little relative to soil elastic modulus and decreases with bionic surface's structural parameters and vertical pressure increasing. However, the three factors all didn't affect the surface frictional coefficient remarkably on the condition of 90% dependability. For the first time, bionic surfaces were applied to screw piles, which formed bionic screw piles, and the contrast experiments showed the bionic screw pile had certain resistance-decreasing effects.

建立了波纹型仿生曲面与土壤的接触面积的水平投影的理论模型，表明接触面积的水平投影A随着波纹型仿生曲面突起宽度、两相邻突起间距的增大而减小，接触面积的水平投影与波纹型仿生曲面表面垂直载荷之比随着波纹型仿生曲面表面垂直载荷的增大而减小，进而得出仿生曲面摩擦系数随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小；利用ANSYS软件对平板与土壤的相互作用进行了有限元建模与分析，表明平板摩擦系数与土壤弹性模量关系不大，而随着表面垂直载荷的增大而减小；平板牵引过程中台车牵引力和仿生曲面控制节点垂直方向位移基本保持不变；利用ANSYS软件对波纹型仿生曲面与土壤的相互作用进行了有限元建模与分析，表明波纹型仿生曲面系数在一定范围内基本不受土壤弹性模量的影响，随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小，但在可信度为90％的前提下，三个因素影响都不显著；首次将波纹型仿生曲面应用于与土壤作用方式以挤压为主的螺旋桩，形成仿生螺旋桩，并与普通螺旋桩进行了沉桩对比试验，表明波纹型仿生曲面应用于螺旋桩桩体表面具有明显的降阻作用。

Result:among 45 patients with AIDS complicated by pulmonary tuberculosis,10 cases with one lung segmental infiltrations,6 cases with 2 lung segmental infiltrations, 4 cases with 3～5 lung segmental infiltrations, 20 cases with diffused lung infiltration , 5 cases with negative lung presentation, among these, 10 cases complicated with PCP , 8 cases with fungus infection, 5cases with bacteria infection confirmed by pathogen test.

结果：45例艾滋病合并肺结核患者，病灶累及1个肺段的10例，2个肺段的6例，3～5个肺段的4例，两肺弥漫性分布的20例，肺部无阳性表现者5例，其中病理证实同时合并卡氏肺孢子虫肺炎10例，合并细菌感染8例，合并真菌感染5例。

And if officials on the take are not parroting the opinions of these companies, what can we suppose the money they receive is for?

如果受贿的官员不鹦鹉学舌般地复述这些公司的看法，那他们所接受的钱又能用于什么目的呢？

Love them, and love you too, Pitcher.

爱他们，也爱你，投手。