查询词典 valves

"Hydraulic safety valve" is widely used in hydraulic power systems and hydraulic equipment of safety devices, pressure devices can be limited, is a special valve, which is different from the conventional valve, the traditional use of mechanical valves metal spring as a driving force, can only be limited to low pressure, encountered more BALANCING VALVES than 10Mpa pressure limit pressure can do to increase the volume of pressurized design, the traditional role of the high-pressure valves and high pressure hydraulic power systems and hydraulic equipment The limit pressure of necessity is bulky and complicated structure, difficult to manufacture large, high production costs; in the course of the fatigue of metal spring parameters change fluctuating pressure limiting Ambassador to regular revision to ensure the normal use.

&气动液压安全阀&是目前广泛应用于液压动力系统和液压设备中的安全装置，也可以作限压装置，是一种特殊的阀门，它不同于传统的阀门，传统阀门用机械金属弹簧为动力，只能限中低压力，遇到超过10Mpa以上的压力限压，闸阀只能做加大体积的增压设计，因此传统阀门作用于高压和超高压的液压动力系统和液压设备的限压时必然体积笨重，结构复杂，制造难度大，产品成本高；在使用过程中金属弹簧的疲劳变化大使限压参数波动大，要经常调整才能保证正常使用。

"Hydraulic safety valve" is now widely used in hydraulic power systems and hydraulic equipment in the safety device could also serve as limited pressure device, is a special valve, unlike conventional valves, conventional valves with mechanical metal spring as a driving force, can only be limited to low pressure, the pressure encountered over more than 10Mpa limit pressure can do to increase the volume of the Safety Overflow Valve booster design, the traditional role of the high-pressure valves and high pressure hydraulic power systems and hydraulic equipment The limit pressure of necessity is bulky and complicated structure, difficult to manufacture large, high production costs; in the course of the fatigue of metal spring parameters change fluctuating pressure limiting Ambassador to regular revision to ensure the normal use.

&气动液压安全阀&是目前广泛应用于液压动力系统和液压设备中的安全装置，也可以作限压装置，是一种特殊的阀门，它不同于传统的阀门，传统阀门用机械金属弹簧为动力，只能限中低压力，遇到超过10Mpa以上的压力限压，只能做加大体积的增压设计，因此传统阀门作用于高压和超高压的液压动力系统和液压设备的限压时必然体积笨重，结构复杂，制造难度大，产品成本高；在使用过程中金属弹簧的疲劳变化大使限压参数波动大，要经常调整才能保证正常使用。

Wedgeplug O-Seal plug valves with their positive, no-leak features are not only recommended as the best general purpose valves for handling hydrocarbons, vegetable oils, solvents, etc., but are ideal for such tough service as butane, propane, butadiene, acetone, ethyl alcohol, ammonia, anhydrous ammonia, benzene, vinyl chloride, dry chlorine, Dowtherm, ethane, ethylene, hydrogen chloride, napthalene, oxygen, hydrogen, phthalic anhydride, dry phosgene, phosphoric acid, potassium carbonate, styrene, molten sulphur, sulphur dichloride and related services within a temperature range from -300oF to + 450oF within pressure limits of the valves.

楔塞O形密封旋塞阀具有积极的、无泄漏特性，不但是最好的通用的阀门，用于处理碳化氢，植物油，溶剂等，还特别适用于严酷的应用环境，如丁烷，丙烷，丁二烯，丙酮，乙醇，氨，无水氨，苯，氯乙烯，干氯，道氏热载体，乙烷，乙烯，氯化氢，萘，氧，氢，邻苯二甲酸酐，干碳酰氯，磷酸，碳酸钾，苯乙烯，融化硫，二氯化硫，以及温度在-184oC至232oC之间，压力在阀门额定压力等级范围内的有关应用。

With the complication and diversification of components, Composite Hydraulic Manifold Block which installed plate valves, lap valves and cartridge valves is the mainstream in the application and development of integrated hydraulic system.

随着液压元件日益复杂化、多元化，复合式液压集成块，即载有板式阀、叠加阀、插装阀等阀体和其它各类附件的液压集成块，已成为目前液压系统发展和应用的主流。

My company mainly produces ball valves, butterfly valves, non-standard valves, and other three categories, a total of 92 series, more than 1,500 specifications, product characteristics: large-caliber, corrosion resistance, high temperature, wear resistance, the path DN80-3000mm, pressure PN0.01-32MPa.

我公司主要生产球阀、蝶阀、非标阀等三大类，共92个系列，1500多个规格，产品特点：大口径、耐腐蚀、耐高温、耐磨损，通径DN80-3000mm，压力PN0.01-32MPa。

The company's main products are: the direction of valves, pressure valves, flow valves, proportional valve, piston pump, gear pumps, motors, and so on.

本公司主要产品有：方向阀，；压力阀，流量阀，比例阀、柱塞泵、齿轮泵、马达等。

Rotary control valve is a control valve, control valve also includes a number of straight travel valve, such as cut-off valves, gate valves, diaphragm valves.

旋转调节阀是一种控制阀，控制阀还包括一些直行程阀如截止阀、闸阀、隔膜阀。

Equipment Department of the valve device integrated management: including the ledger set up, the valve procurement, warehousing inspection, transfer and retirement, etc.; water supply valve control center for Safety valves the pipeline network technology management: including the identification of technical standards, the establishment of the valve file cards, valve selection, construction and acceptance; the water plant, branch within the jurisdiction of valves, maintenance and repair, management Plug Valves responsibility for the work unit; valve testing center is testing the functions of the valve unit .

公司设备部为阀门设备综合管理部门：包括台帐建立、阀门采购、入库验收、调拨及报废等工作；供水调度中心为管网阀门技术管理部门：包括确定技术标准、气动调节阀建立阀门档案卡、阀门选型、施工及验收等；各水厂、分公司为所辖范围内阀门的使用、保养和维修、管理等工作的责任单位；阀门检测中心水力控制阀是阀门检测职能单位。

Normative references GB 150 steel pressure vessel GB 152.1 ~ 152.4 fastener hole and Shen Kong GB 196 commonDast Gate Valves thread of basic dimensions (diameter l ~ 600mm) GB 197 common thread of tolerance and fit (diameter of 1 ~ 355mm) GB 798 live bolt GB 897 stud bm = ld GB 898 stud bm = 1.25d GB 901 Dlass B and other long stud GB 5782 Hexagon head bolts B and B class GB 5796.1 ~ 5796.4 Dl 150, 300, 600 Lb Dast Steel Gate Valvestrapezoidal thread GB 6175 2 Hexagon nut B and B class GB 9112 types of steel pipe flanges GB 9113.1 ~ 9113.26 Integral steel pipe flanges GB 12220 Universal Valve Logo GB 12221 length of theDl 900, 1500 Lb Dast Steel Gate Valves valve structure of metal flange GB 12222 Multi-turn valve actuator attachment GB 12224 General requirements for steel valves GB l2228 General Valve carbon steel forgings GB 12229 Universal Valve carbon steel castings GB 12230 Universal Valve austenitic steel castings GB / T 12252 General requirements valve supplier ZB Jl6 006 test and test valve 原文来源:http://www.1zhafa.com

引用标准 GB 150 钢制压力容器 GB 152.1～152.4 紧固件通孔及沉孔 GB 196 普通螺纹基本尺寸(直径l～600mm) GB 197 普通螺纹公差与共同(直径1～355mm) GB 798 活节螺栓 GB 897 双头螺柱bm＝ld GB 898 双头螺柱bm＝1.25d GB 901 等长双头螺柱 B级 GB 5782 六角头螺栓 B和B级 GB 5796.1～5796.4 梯形螺纹 GB 6175 2型六角螺母 B和B级 GB 9112 钢制管法兰类型 GB 9113.1～9113.26 整体钢制管法兰 GB 12220 通用阀门标记 GB 12221 法兰连接金属阀门结构长度 GB 12222 多回转阀门驱动装配的连接 GB 12224 钢制阀门一般要求 GB l2228 通用阀门碳素钢锻件技术条件 GB 12229 通用阀门碳素钢铸件技术条件 GB 12230 通用阀门奥氏体钢铸件技术条件 GB/T 12252 通用阀门供货要求 ZB Jl6 006 阀门的试验与检验

5 Degree display tray open Balance Valves and close valves ① valves open and close levels of scale line should be cast in the gearbox cover or change the direction of the display after the disc casing, all for the ground wire brush on a scale phosphor to show striking;② direct needle plate material in the case of better management of available stainless steel, or steel plate for the painting, do not use the aluminum skin production;③ direct drive needle eye-catching, stable fixation, accurate adjustment when opening and closing after the lock should rivet.

4.5 阀门启闭程度的显示盘①阀门启闭程度的刻度线，应铸造在变速箱盖上或转换方向后的显示盘的外壳上，一律面向地面，刻度线刷上荧光粉，以示醒目；②指示盘针的材质在管理较好的情况下可用不锈钢板，否则为刷漆的钢板，切勿使用铝皮制作；③指示盘针醒目，固定牢靠，一旦启闭调节准确后，应以铆钉锁定。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。