查询词典 valve seat

In the fully open and full closed when the ball and valve seat sealing HQ41 sliding path roller type check valve and the dielectric isolation, high-speed through the valve sealing of the medium will not be eroded.

在全开和全闭时，球体和阀座的密封面与介质隔离，因此高速通过阀门的介质不会对密封面侵蚀。

Before assembling the ball valve seat sealing surface and be equipped with decent research, and then placed in the closed position the sphere, the installation of left valve, adjusting the gasket, tighten the screws, static pressure irrigation does not leak, this valve can be guaranteed under the seal test seal.

装配前阀座密封面与球体面应配研，然后将球体置于关闭位置，安装左阀体，调整垫片，拧紧螺钉，静压灌水不漏，则此阀在密封试验下即可保证密封。

The main parameter is the safety valve displacement, the displacement determined by the caliber of the valve seat and valve flap opening height, from the opening a high degree of difference Enlight is divided into two kinds of style and all-Kai style.

安全阀的主要参数是排量，这个排量决定于阀座的口径和阀瓣的开启高度，由开启高度不同，又分为微启式和全启式两种。

Valve plate and valve seat sealing surface for the oblique cone structure, in the valve plate oblique cone surfacing temperature, corrosion resistant alloy materials; fixed platen in the regulation of rings between the spring and the adjustment bolt assembly with the platen structure.

阀板与阀座的密封面为斜圆锥结构，在阀板斜圆锥表面堆焊耐温、耐蚀合金材料；固定在调节环压板之间的弹簧与压板上调节螺栓装配一起的结构。

Valve plate and valve seat sealing surface for the oblique cone structure, oblique cone surface in the valve plate welding temperature, corrosion resistant alloy materials; fixed in the regulation of the spring between the ring plate and the plate with the adjusting screw assembly structure.

阀板与阀座的密封面为斜圆锥结构，在阀板斜圆锥表面堆焊耐温、耐蚀合金材料；固定在调节环压板之间的弹簧与压板上调节螺栓装配一起的结构。

Valve plate and valve seat sealing surface for the oblique cone structure, oblique cone surface in the valve plate welding temperature, corrosion resistant alloy materials; fixed in the regulation of the spring between the ring plate and the Butterfly Valves plate with the adjusting screw assembly structure.

水力控制阀阀板与阀座的密封面为斜圆锥结构，在阀板斜圆锥表面堆焊耐温、耐蚀合金材料；固定在调节环压板之间的弹簧与压板上调节螺栓装配一起的结构。

Piston-type check valve: valve within the valve seat around the valve pin rotation.

活塞式止回阀：阀瓣围绕阀座内的销轴旋转的止回阀。

And the first research for the variation of valve seat velocity, valve impulsive force and valve jump with the cam turning speed, the structures and the different cam profilers have been engaged in, such study work had not been done before about the valve train.

气门落座特性参数的变化规律在应用单质量模型和有限元模型时是很难得到的，而利用多质量模型可以很容易得到，因此澄清了以往的一些模糊认识，也得出了一些很有价值的结论。

Cavitations is the major problems of designing water hydraulic valve, understanding the relationship between shape of valve and cavitations , avoiding cavitations is extremely important, this paper, the numerical simulation and visualization research of flow field is carried out to research relation between the flow field of poppet valve and the length of valve seat by finite volume numerical method.

气穴是研制水压阀存在的主要难题，认识阀口形状与气穴的关系，避免产生气穴现象是极其重要，本文应用有限体积数值计算方法针对阀座倒角长度变化对水压阀阀道内流场的影响进行数值模拟和可视化研究，得到了一些有益的结论：倒角长度的改变对阀口间隙以及阀芯锥面与柱面相接的地方的负压会产生比较大的影响

3 Open the regulator and the nozzle ring ring screw fixation screws; 1.3.4 release and remove the valve cover nut; 1.3.5 screw bolts with rings at the stem, from the valve assembly of the upper part of the body perpendicular to bring devices; when the upper part of unit from the valve body will be raised when the stem or any part not allowed to have any sway movements, any shaking could damage to the valve seat.

1.3.3 拆开调节环固定螺丝和喷咀环固定螺丝； 1.3.4 松开并拆下阀盖螺母； 1.3.5 用吊环螺栓拧在阀杆上，从阀体内垂直提起组装的上部装置；当从阀体内将上部装置提出来时，不允许阀杆或任何部件有任何的摇摆动作，任何摇动都可能损坏阀座。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。