查询词典 tubular

With the help of these devices, strains at the inner surface of a tubular reactor as the inner pressure changes from 0 to 560 MPa are measured, inner surface residual stress of the reactor is obtained.

为提高反应器的安全度，在反应器制造过程中，对其中的反应管进行了自增强处理，使反应管内壁形成了有益的残余压应力。

The titania nanotube arrays prepared by this method exhibit an especial morphology, that is, a continuous porous surface and discrete tubular cross-section structure.

采用本方法制备的纳米管阵列具有特殊的形貌，即表面的连续多孔结构和断面的不连续、分离的管状特征。

The object includes a tubular member having an outer surface contacting the heater and a hollow part for steam generation defined therein.

所述目标包括具有与加热器的外表面的接触的管状构件以及在其中限定用于产生蒸汽的中空部分。

Compared with results in the literature, the NaA zeolite membrane synthesized on the inner surface of the tubular TiO〓/α-Al〓O〓 support was high in quality.

与文献报道比较，本文在管状TiO〓／α-Al〓O〓支撑体内壁上所合成的NaA型沸石分子筛膜是高质量的。

According to the investigation of hydrophobic properties of ACNT films, we expect that it is not limited to ACNT films, all nanoscale tubular or fibrillar surface/interfacial materials with the alignment structure are probably superhydrophobic or super-amphiphobic through hydrophobic reagent treatment.

根据对阵列碳纳米管膜疏水性能的研究，我们预期，不限于阵列碳纳米管膜，所有其它的具有阵列结构的纳米级管状或纤维状材料，经过疏水试剂适当处理后，都可能会具有超疏水或超双疏效果。

By the interaction of ethyl acetate and water class solution, The nano silica was synthesized on fused silica capillary tubular inner surface, its morphology and change trend of surface area pore volume and pore size under different reaction condition were investigated.

第三章 原位溶胶-凝胶法制备纳米SiO〓型PLOT石英毛细管色谱柱及其应用建立了原位溶胶-凝胶法制备纳米SiO〓型PLOT色谱柱的方法，采用原位溶胶-凝胶法在毛细管内壁合成出均匀的纳米硅胶多孔层，对所合成的纳米硅胶颗粒进行了形貌表征，同时考察了不同反应条件下纳米硅胶的比表面积、孔体积和孔径的变化规律。

ConclusionsSerum from asphyxiated neonates can induce HK2 cell adhesion to neutrophils, possibly through activating NFκB and increasing the synthesis and expression of ICAM1 on the surface of renal tubular epithelial cells.

窒息后血清可以诱导肾小管上皮细胞活化进而粘附中性粒细胞，其作用机制可能涉及到窒息后血清活化了NF-κB，从而使肾小管上皮细胞膜表面ICAM-1表达增加，进而粘附中性粒细胞。

The biomimetic furrow opener surface with UHMWPE tubular section ridges recorded equivalent stress of0.968×10~8Pa and stress distribution in direction of motion of0.166×10~8Pa as the lowest stresses values compared to the other surface designs of furrow openers.

ANSYS分析表明普通推土铲具有最高的等应力和最高的在运动方向上的应力分布，其值分别为1.30×10~8Pa和0.76×10~8Pa；等应力和运动方向上应力的最低值分别为0.241×10~8Pa和0.159×10~8Pa，发生于没有非光滑结构的超高分子量聚乙烯材料板表面。

At 135 mm depth and 0.28 m/sec speed, the biomimetic furrow opener surface with UHMWPE tubular ridges recorded 0.62 kN and 0.17 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 0.91 kN and 0.82 kW. The experimental values of resistance force and power for the conventional surface furrow opener at 100 mm depth, and 0.28 m/sec speed were 0.72 kN and 0.20 kW, while at 100 mm depth and 0.92 m/sec speed, the values were 1.11 kN and 1.0 kW. At 135 mm depth and 0.28 m/sec speed, the conventional surface furrow opener recorded 0.93 kN and 0.25 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 1.50 kN and 1.35 kW.

试验测试结果：当耕深100 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.72kN和0.20kW；当耕深100 mm和耕作速度0.92 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为1.11kN 和1.0kW；当耕深135 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.93kN和0.25kW；而当耕深135 mm和耕作速度0.92 m/sec时，实测的普通表面开沟器的土壤阻力和动力消耗分别为1.5kN和1.35kW。

It can processing different kinds of decorative patters on the surface of hollow tubular(including circular tube and hexagon socke pipe) such as screw thread, screw thread crosswire, starry sky,ect. There are more than 30 kinds of patters.

特点：针对空心管表面花纹连续制作的最佳设备，能在管状物表面加工螺纹、螺纹交叉线、弄分点状花，满天星花等不同花纹款式，款式多达三十多种以上。

And Pharaoh spoke to Joseph, saying, Your father and your brothers have come to you.

47：5 法老对约瑟说，你父亲和你弟兄们到你这里来了。

Additionally, the approximate flattening of surface strip using lines linking midpoints on perpendicular lines between geodesic curves and the unconditional extreme value method are discussed.

提出了用测地线方程、曲面上两点间短程线来计算膜结构曲面测地线的方法，同时，采用测地线间垂线的中点连线和用无约束极值法进行空间条状曲面近似展开的分析。