查询词典 tubular penrack

According to the investigation of hydrophobic properties of ACNT films, we expect that it is not limited to ACNT films, all nanoscale tubular or fibrillar surface/interfacial materials with the alignment structure are probably superhydrophobic or super-amphiphobic through hydrophobic reagent treatment.

根据对阵列碳纳米管膜疏水性能的研究，我们预期，不限于阵列碳纳米管膜，所有其它的具有阵列结构的纳米级管状或纤维状材料，经过疏水试剂适当处理后，都可能会具有超疏水或超双疏效果。

By the interaction of ethyl acetate and water class solution, The nano silica was synthesized on fused silica capillary tubular inner surface, its morphology and change trend of surface area pore volume and pore size under different reaction condition were investigated.

第三章 原位溶胶-凝胶法制备纳米SiO〓型PLOT石英毛细管色谱柱及其应用建立了原位溶胶-凝胶法制备纳米SiO〓型PLOT色谱柱的方法，采用原位溶胶-凝胶法在毛细管内壁合成出均匀的纳米硅胶多孔层，对所合成的纳米硅胶颗粒进行了形貌表征，同时考察了不同反应条件下纳米硅胶的比表面积、孔体积和孔径的变化规律。

ConclusionsSerum from asphyxiated neonates can induce HK2 cell adhesion to neutrophils, possibly through activating NFκB and increasing the synthesis and expression of ICAM1 on the surface of renal tubular epithelial cells.

窒息后血清可以诱导肾小管上皮细胞活化进而粘附中性粒细胞，其作用机制可能涉及到窒息后血清活化了NF-κB，从而使肾小管上皮细胞膜表面ICAM-1表达增加，进而粘附中性粒细胞。

The biomimetic furrow opener surface with UHMWPE tubular section ridges recorded equivalent stress of0.968×10~8Pa and stress distribution in direction of motion of0.166×10~8Pa as the lowest stresses values compared to the other surface designs of furrow openers.

ANSYS分析表明普通推土铲具有最高的等应力和最高的在运动方向上的应力分布，其值分别为1.30×10~8Pa和0.76×10~8Pa；等应力和运动方向上应力的最低值分别为0.241×10~8Pa和0.159×10~8Pa，发生于没有非光滑结构的超高分子量聚乙烯材料板表面。

At 135 mm depth and 0.28 m/sec speed, the biomimetic furrow opener surface with UHMWPE tubular ridges recorded 0.62 kN and 0.17 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 0.91 kN and 0.82 kW. The experimental values of resistance force and power for the conventional surface furrow opener at 100 mm depth, and 0.28 m/sec speed were 0.72 kN and 0.20 kW, while at 100 mm depth and 0.92 m/sec speed, the values were 1.11 kN and 1.0 kW. At 135 mm depth and 0.28 m/sec speed, the conventional surface furrow opener recorded 0.93 kN and 0.25 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 1.50 kN and 1.35 kW.

试验测试结果：当耕深100 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.72kN和0.20kW；当耕深100 mm和耕作速度0.92 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为1.11kN 和1.0kW；当耕深135 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.93kN和0.25kW；而当耕深135 mm和耕作速度0.92 m/sec时，实测的普通表面开沟器的土壤阻力和动力消耗分别为1.5kN和1.35kW。

It can processing different kinds of decorative patters on the surface of hollow tubular(including circular tube and hexagon socke pipe) such as screw thread, screw thread crosswire, starry sky,ect. There are more than 30 kinds of patters.

特点：针对空心管表面花纹连续制作的最佳设备，能在管状物表面加工螺纹、螺纹交叉线、弄分点状花，满天星花等不同花纹款式，款式多达三十多种以上。

The predicted values of resistance force and power for the conventional surface furrow opener at 100 mm depth and 0.28 m/sec speed were0.51 kN and0.14kW, while at 100 mm depth and 0.92 m/sec the values were0.98kN and0.88kW. At 135 mm depth and 0.28 m/sec speed, the conventional surface furrow opener recorded 0.70 kN and 0.20 kW, while at 135 mm and 0.92 m/sec speed, the values were 1.40 kN and 1.26 kW. The predicted values of resistance force and power for the biomimetic furrow opener surface with UHMWPE tubular section ridges at 100 mm depth and 0.28 m/sec speed were 0.45 kN and 0.12kW, while at 100 mm depth and 0.92 m/sec speed, the values were 0.73kN and 0.66 kW.

对于超高分子量聚乙烯材料仿生脊型非光滑结构表面，当耕深100 mm和耕作速度0.28 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.45kN和0.12kW；当耕深100 mm和耕作速度0.92 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.73kN和0.66kW；当耕深135 mm和耕作速度0.28 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.62kN和0.17kW；而当耕深135 mm和耕作速度0.92 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.91kN和0.82kW。

NaA zeolite membranes have been found a potential application in the separation of the small-sized gas molecules by molecular sieving and dehydration of liquid mixtures by pervaporation. However, there are some problems in the preparation in the NaA zeolite membranes such as the scarce support types, insufficient study on the synthesis rules and few literature concerning the NaA zeolite membranes preparation on the inner surface of the tubular support.

中文题名NaA型沸石分子筛膜的合成及渗透性能研究副题名外文题名 Preparation and permeation studies on NaA zeolite membrane 论文作者董强导师徐南平教授时钧院士学科专业化学工程研究领域\研究方向学位级别博士学位授予单位南京工业大学学位授予日期2001 论文页码总数108页关键词膜分离沸石分子筛膜微滤膜馆藏号BSLW /2003 /TQ028 /23 NaA型沸石分子筛膜在小分子气体分离和渗透汽化分离等领域预期有着良好的应用前景。

Scanning electron micrograph results showed no surface rupture either on garlic skin or garlic kernel by sodium alginate solutions. It also indicated tubular texture for the surface of garlic skin, and sponge-like structure for the surface of garlic kernel, respectively. Average surface roughness by magnetic force microscopy were under 57 for garlic skin, and under 13 for garlic kernel, respectively.

扫描式电子显微镜影像观察可知海藻酸钠薄膜溶液涂布后皆不会对蒜皮或蒜仁表面造成破坏，并且发现蒜皮表面较为粗糙之维管组织，相对於蒜仁表面较平滑之海绵薄壁组织。

Some problems in the design of circular tubular joints are discussed in this paper.

本文探讨了圆管结构相贯节点设计中的若干问题。

Nowadays, most of research are to build a transmutative Petri Nets through adding controlling place sets, controlling arc sets and controlling policy to the basic Petri Nets, while the Controlled Petri Nets could be used to argue many controlling theory problems conveniently and to induce many logically and physically supervisory and solve the Event Feedback Controlling Problems and State Feedback Controlling Problem in DEDS supervisory theory.

目前大多数的研究表现为在变形后的受控Petri网基础上，利用各种方法求得各种逻辑型、结构型控制器，解决DEDS监控理论中的事件反馈控制问题与状态反馈控制问题。

On one hand, there are discussions with the works council and union about extension of short time working up to the end of September.

一方面，有讨论，工程理事会和联盟关于延长工作时间短至9月底。