查询词典 tensile stress

The maximum stress theory was combined with failure index of strength. Tensile strength of laminates was obtained on the analysis of 0° ply.

使用最大应力准则和强度破坏指标相结合的方法，根据主承力层的失效得到层合板的抗拉强度。

The results show that, when the electromagnetic field was applicated, the flowability and filling capacity of cupronickel alloy are increased, the surface cracks are eliminated, and the thin-walled cupronickel tube billets with smooth surface can be obtained due to the increase of flowability and filling capacity of cupronickel alloy. The solidification structure of the tube billets is evidently refined, the shape of Ni-rich phase changes from needle-like to bulk and the casting stress declines from 7.2 to 0.32 MPa. With the structure improving, the tensile strength and elongation increase by 5% and 36%, respectively, than those of ordinary continuously cast tube billets.

结果表明：在连铸过程中施加旋转电磁场能够提高金属液的流动性和充型能力，消除表面裂纹缺陷，从而制备出表面光滑的薄壁白铜管坯；在电磁力的作用下管坯凝固组织显著细化，富镍相由针状转化为团块状，同时铸造应力由未施加电磁场时的7.2 MPa下降至0.32 MPa；随着凝固组织的改善，施加磁场的管坯抗拉强度和伸长率与未施加磁场管坯的相比分别提高5%和36%。

On the base of the analysis of the static fbd under diametric compression , numerical analysis and compare are performed on the dynamic stress field of the brazilian disk and fbd used in the testing tensile strength under shpb

在对静态平台压缩巴西圆盘进行的数值分析的基础上，本文分析了shpb动态劈裂拉伸实验中巴西圆盘和平台巴西圆盘的动态应力场，并对结果进行了比较。

New ideas and methods in the paper:1 The formulas on perforated casing collapse strength were deducted, which offereda convenient method to analyze the relationship between casing collapse strength and perforation;2 The stress and displacement formulas on the system of casing, cement anddeformation under the non-uniform load were deducted, which offered the theoretical found for designing optimally casing string;3 The relationship between structure in-situ field of whole oil field and casing failurewere studied, which offered the scheme for the prediction of casing failure. The process of study in the paper:1 For simulating the relationship between the structure in-situ field and the casingfailure in the oil-deformation, the tests of the uniaxial tensile, compress, tnaxial compress and dilatability were made on the samples of the drill cores from deformation of casing failure position in Yuejing II oil field.

本文的主要创新： 1推导出了射孔套管抗挤强度的解析式，为分析射孔与套管强度的变化关系提供了简便的方法； 2推导出了非均匀地层载荷作用下套管、水泥环和地层组合体的应力和位移解析式，并非均匀作用下套管柱优化设计提供了理论依据； 3研究整个油田区块构造应力场与套管损坏关系，为预测套管损坏提供了可行方案；本文的研究过程如下： 1为模拟构造应力场与油层段套管损坏关系，做了大量的岩石单轴抗拉、单轴抗压、三轴试验以及岩石遇水膨胀试验，获得了研究区块岩石的弹性模量、泊松比、内聚力、内摩擦角以及岩石的线膨胀系数，这此数据为本文研究油层段套管损坏机理研究的理论分析和有限元法提供了实验数据。

Using nickel aminosulfonic bath as a study system of electroform ing and by adding cobalt aminosulfonic,the internal stress,composition,hardness and tensile strength of the electroform ed nickel-cobalt deposit were tested.

采用氨基磺酸镍镀液作为电铸的研究体系，并在镀液中加入氨基磺酸钴，对镍钴合金电铸层的内应力、组成、硬度、抗拉强度等进行了测试。

A tensile-strained stress film is deposited on the gate region and at least a portion of the source region and the drain region of the PFET.

张应力应变膜(76)沉积在PFET(52)的栅极区(64)与至少部分的源极区(60)和漏极区(58)上。

A tensile-strained stress film is disposed on the gate region and at least a portion of the source region and the drain region of the PFET.

张应变应力膜设在PFET(52)的栅极区(64)与至少部分的源极区(60)和漏极区(58)上。

The results showed that when retrogressed by electrical current heating at 200 ℃ the tensile strength in re-aged 7A04 alloy extrusion bar of 60 mm in diameter reached 620-640 MPa and a uniform elongation appeared from central part to surface layer of the sample while the fracture time in test of resistance to stress corrosion under a load stress of 375MPa in 3%NaCl+0.5%H2O2 corrosion solution was greater than 30 d.

结果表明，直径60 mm的7A04铝合金棒材在200℃电流直接加热回归后再时效，从心部到表层的拉伸强度为620-640 MPa，延伸率均匀一致；在3%NaCl+0.5%H2O2水溶液介质中和375 MPa应力下的应力腐蚀断裂时间大于30d，而辐射式加热回归的为575 MPa，延伸率从心部至表层表现极不均匀，应力腐蚀断裂时间只有19 d。

The results showed that when retrogressed by electrical current heating at 200℃the tensile strength in re-aged 7A04 alloy extrusion bar of 60 mm in diameter reached 620- 640 MPa and a uniform elongation appeared from central part to surface layer of the sample while the fracture time in test of resistance to stress corrosion under a load stress of 375MPa in 3%NaCl+0.5%H_2O_2 corrosion sol...

结果表明，直径60 mm的7A04铝合金棒材在200℃电流直接加热回归后再时效，从心部到表层的拉伸强度为620-640 MPa，延伸率均匀一致；在3%NaCl+0.5%H_2O_2水溶液介质中和375 MPa应力下的应力腐蚀断裂时间大于30 d，而辐射式加热回归的为575 MPa，延伸率从心部至表层表现极不均匀，应力腐蚀断裂时间只有19 d。

The results of simulations performed at nearly zero temperature demonstrate that stress-induced phase transitions from body-centered cubic to face-centered cubic and hexagonal close-packed structures take place during the deformation process of both Fe and Ta, and the maximum fraction of FCC atoms varies linearly with the tensile strength, from which we can conclude that a critical stress exists for the phase transition to take place.

低温模拟结果表明，纳米晶铁和钽在变形过程中都出现了应力诱导的相变，其中FCC结构含量的最大值和抗拉强度成线性关系，并由此可以推出相变发生的临界应力值。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。