查询词典 surface features

A series of erosion-corrosion test has been done to J55 steel under the influence of current of gas-liquid phase by indoor self-made devices, and the corrosion mechanism of current of gas-liquid phase to oil pipe's inner surface has been got. The results show that oil pipe's inner surface will be corroded fleetly by liquid medium and corrosion products will form on it. But at the same time, the corrosion products or protective layer will be removed from the inner surface of steel pipes under the alternate impact of high speed gas and liquid flow, and on this bare steel surface corrosion film will form again and be removed again. Thus, by these ways the corrosion is exacerbated. Surface erosion-corrosion failure comes into being with the circulation of this process going on.

本文主要在气液两相流作用条件下，通过室内自制装置，对管材钢J55做了系列冲刷-腐蚀试验，结果表明，气液两相流对钢管内表面冲刷－腐蚀的机理是钢管内表面会受到液体介质的快速腐蚀，生成腐蚀产物，同时钢管金属表面不断被具有高流速的气液相交替地冲击，不断地从金属表面脱去保护膜或腐蚀产物，裸露的钢表面又会被介质快速腐蚀形成腐蚀膜后，再被两相流冲掉，如此反复，造成管内金属表面膜的连续破坏，使腐蚀加剧，最终导致钢铁表面的冲刷腐蚀失效。

Methods An unsupervised local and global features extraction method was adopted for the localization of facial features of frontal view face image. First, a threshold was used to segment the image into foreground and background, and the nose was localized by considering the symmetry of the face. Second, Harris operator was adopted to detect interest points in a rectangular area covering all the facial features, and then local maximum of the interest points were detected. And finally, Kmeans clustering method was used to cluster the points and obtain the facial features localization.

针对红外正面脸部图像，采用一种无监督的局部和全局的特征提取方法，首先通过阈值法区分出前景和背景，并根据面部特征对称性在前景中确定鼻区；然后在面部确定一个包含所有特征的矩形区域，利用Harris算子在该区域检测出角点，并找出这些点的局部最大值点；最后用Kmeans方法对这些点进行聚类。

Videlicet, this sequence represents the accountability of the 11 features in distinguishing insects on the level of species. According to the above results, some features varies not remarkably on all levels, such as Lobation, Shape-Parameter etc. This shows that such kind of features are nearly same in all species of insects, and can represent the feature suitable to distinguish all insects from other classes of animals. On the other hand, they are not suitable as distinguishable features of levels which lower than insect Class.

从结果可以看出，有些特征在各个分类阶元上差异均不是很显著，如叶状性、形状参数，说明此类特征在昆虫中具有较强的共性，可以代表整体昆虫的特征，而不适合于作昆虫纲下阶元的分类特征；有些特征在各分类阶元下的差异始终比较显著，如周长、面积等，说明这些特征适合在各分类阶元上作为昆虫的分类特征。

The tectonic rocks along the fault zone are composed of cataclastic rocks and mylonites formed in higher, middle and lower temperature. Respectively, both of structural features and rocks have the features of multiple phase's of deformation. The deformation features of main minerals in the high temperature mylonites show that: the quartz has the form of long single crystal and the fabric feature of point maximum near X axis; the feldspar has the form of recrystallization assemblage, They present a high amphibolite-granulite facies with temperature ＞600℃ and depth ＞20km. The deformation features of mylonites formed in middle temperature show that: the quartz has the form of polycrystal banding and the fabric feature of point maximum near Y axis and small circle girdle with Y rotational axis; the feldspar has the form of a coremantle structure, They reflect a high greenschist-lower amphibolite facies with temperature from 400℃ to 600℃ and depth from 15km to 20km.

其中，高温糜棱岩主要矿物变形特征组合为：石英为长矩状或长条状单晶、组构为近X轴的点极密，长石为几乎完全重结晶的集合体，形成温度＞600℃，相当于高角闪岩—麻粒岩相，形成深度＞20km；中温糜棱岩主要矿物变形特征组合为：石英为多晶条带、组构为近Y轴点极密和以Y轴为旋转轴的小圆环带，长石发育核幔结构，形成温度为400～600℃，相当于高绿片岩—低角闪岩相，形成深度为15～20km；低温糜棱岩主要矿物变形特征组合为：石英发育核幔结构、组构特征为近Z轴点极密，长石以碎裂为主，形成温度＜400℃，相当于中低绿片岩相，形成深度为8～12km；碎裂岩则主要代表了地表浅层的变形。

Further, this paper explains three features of the unified utilitarian theory: features of my modified VNM expected utility theory, features of my subjectivistic theory of value, and features of the unified utility theory as an ethical theory.

统合效用主义的三项特色为：修正的VNM预期效用理论之特色、主观主义的价值理论之特色和统合效用主义作为一种伦理学之特色。

In degraded PSM matching classification, errors modification method of degraded PSM is presented and the matching tensor of every canonical scattering centers is given. In Chapter 4, the theory of wideband millimeter-wave radar target identification is introduced. It is indicated that, for HR radar target identification, description of temoral relations among features and pattern recogntion adaptive to variation of target angles are of key importance. A rule-based pattern recogniton method of sequential reasoning is proposed, which uses a series of rules to describe relations of features variation caused by target angles variation and has the advantages of adaption to unrandom variation and false probability control in classification over traditional statistical pattern recognitiop method. Feature extraction is crucial step in target identification. In range profiles identification application, features are extracted by means of range domain pre-processing algorithm, spacial and amplitude visual computation directly from range profiles and transform algorithm based on range profiles. Visual or transformed features are either sufficiently convinced or necessarily convinced and both of them are effective and robust to range profiles identification.

在第四章，首先对宽带毫米波体制背景下目标识别方法的一些特点进行了阐述并指出，在毫米波雷达目标识别中，特征之间动态关系的描述以及能适应目标姿态角变化的模式识别方法的研究乃是要解决的关键问题；进而提出了一种基于规则库的序贯推理模式识别新方法，在这种方法的研究中，主要包括序贯推理规则库的规则排列与特征选用顺序以及规则库的收敛等问题；这种方法克服了传统的统计模式识别方法特征利用效率不高、难以适应特征值的非随机性变化的缺点，把姿态角变化所引起的特征的变化用一系列规则加以表示，其优点是能适应特征值的非随机性动态变化，并能控制分类过程中的差错概率α；特征抽取是目标识别中的关键步骤，在基于目标距离像的特征抽取方法研究中，提出了距离空间域的预处理算法、距离空间域与幅度域的直观特征抽取方法以及基于目标距离像变换分析的特征抽取方法。

This thesis involves the stylistic analysis of English business articles in Business Week, Forbes and Fortune—totally 25 articles, 25,000 words—from the aspects of lexical features, syntactic features, semantic features and textual features.

本文从近一年来的《商业周刊》，《福布斯》和《财富》杂志中选取了25篇，共25，000字的材料，从词法，句法，语法，结构等方面进行了分析，揭示出该类文章在标题，导语，用词，数字，引用，修辞等方面的文体特征。

According to the analysis of features of the key outcrop sequence stratigraphy, build the sequence frame, through the section comparison, and the study of feature of the 5 key outcrops, then it can be concluded that, conglomerate on the denudation plane or the other contrastive sediment are the main features surrounding the bottom border of the sequence. In the foreland basin sediment environment, the transilient group of mud rock and sandstone are the main sediment features of low-stand system tract. Thick mud rock and sandstone interbedded is the chief component of transgressive system tract, sometimes together with thick turbidity current sandstone; High-stand system tract is composed by the combination of mud rock and sandstone interbedded, with the progradation as its main style. Maximum flooding surface Sediment are usually mudstone, and the thickness is different from each other.

依据关键露头剖面高精度层序特征分析，通过剖面对比建立高精度等时层序地层格架，通过对5条关键露头剖面的详细高精度层序特征分析，认识到：剥蚀面上的粗碎屑岩或与之可区域对比的其它沉积是层序底部边界附近的主要沉积特征；在盆地沉积环境中，砂泥岩发育，厚层、块状砂岩与泥质岩类的突变组合是低位体系域的主要沉积特征；湖进体系域以厚层泥岩夹砂岩为主，有时夹厚度较大的重力流砂体；高位体系域为砂泥互层沉积组合，以进积式叠加样式为主；最大湖泛面多为泥岩，但其厚薄不一。

First, the algrithm classify the measurement characteristics as point, line and surface which can be classified to conicoid and free surface. Then, this algorithm establishes the parametric equation according to various features. After that this paper brings forward the characteristic parameters utilising least square method with several characteristic points. Finally high precision probe radius compensation is carried out according to the features.

该算法首先把测量特征分为点、线、面3种基本特征（其中面特征又分为二次曲面和自由曲面），然后建立各种特征的参数方程，利用测量得到的少量特征点，采用最小二乘法拟合得到被测特征的参数，最后根据被测特征参数进行高精度半径补偿。

The digital dots and stripes are projected respectively onto the surface of the object in order to acquire discriminable features from the surface, which is lack of image features. By this way, the accuracy of image matching is increased effectively.

针对自由曲面存在图像特征稀少的问题，本文分别采用向对象表面投射大小光斑和条纹的方法，人为增加图像特征，有效地提高了立体视觉去歧义匹配的能力。

Hanna: That's over now, isn't it?

都结束了，对吗

You must be ill. You look so pale.

你一定是病了，你的脸色苍白。