查询词典 strip

Selecting corresponding rolling force model, the paper make an experiment and studies on cold rolled paper-thin strip processing characteristics of sixteen-roll rolling machine based on cold-rolled theory aand forms corresponding rolling model, tension model and moment calculation model .And comes to a conclusion that distortion force and press utmost have a large effect on rolling force and paper-thin strip shape, primarily presenting paper-thin strip rolling subarea theory that rolling force decreases corresponding to the thick decrease of strip but increases rapidly when to a certain thick.

结合带钢冷轧基本理论，选用适当的轧制压力模型，针对十六辊轧机轧制极薄带钢时的工艺特点进行了实验和分析，建立了相应的张力模型及辊系传动力矩模型；并得出变形抗力及压靠对轧制极薄带钢时的轧制力和板形有很大的影响，初步提出了当带厚较大时，为保持板形良好，随着轧件厚度的减少，轧制压力相应降低，当轧制到一定厚度时，轧制压力随着带厚的减少急剧增加的极薄带轧制分区理论。

Disclosed is a leaky-wave dual polarized slot type antenna, including: first and second feeding circuit sections comprised of N-first strip lines and N-second strip lines with a loop every first period along the X-axis on the first dielectric layer and a second period along the Y-axis, in which the N-first strip lines and the N-second strip lines are parallel to each other being alternate, and each length of Ls1 and Ls2 for the first period satisfies the equation of , first and second multi-channel dividers formed at once and the other sides of the first dielectric layer, to connect the N-first strip lines and the N-second strip lines parallel with each other; and first and second central ports formed in the opposite direction of the cavity, each of the feeding circuit sections being connected to the first and second multi-channel dividers; and first and second slot sections being formed by patterning the second shielding layer, in which M-first and M-second slots are arrayed along the direction of the X-axis and each of the first and second slots forms N-row first and N-row second slot arrays, respectively, which cross the first and second strip lines for each, the first slot and the second slot being orthogonal to each other.

公开了一种漏泄波双偏振槽型天线，包括：第一和第二馈电回路部分，其具有沿着X轴在第一介电层每第一周期以及沿着Y轴的第二周期形成具有环路的N第一带状线和N第二带状线，其中N第一带状线和N第二带状线彼此平行并交替，并且对第一周期的各Ls1和Ls2的长度满足等式，第一和第二多通道分配器寻形成在第一介电层的一侧和另外一侧上，以连接彼此平行的N第一带状线和N第二带状线；以及形成在腔的相对方向中的第一和第二中心端口，每个馈电回路部分连接到第一和第二多通道分配器；以及第一和第二槽部分，所述第一和第二槽部分通过对第二屏蔽层形成模式而形成，其中M第一和M第二槽沿着X轴的方向安置，各第一和第二槽分别形成N行第一和N行第二槽阵列，其对每个横过第一和第二带状线，第一槽和第二槽彼此正交。

The formula was established about calculating design parameters and technological parameters of ideal strip and bent strip in the period of forming. The thesis presented how to calculate the deformed area length and contact are radius of contact deforming between two elastic bodies on condition of the friction. The calculating formula of pinch force about plate-strip pinch mill was given and the results were analyzed that friction coefficient and radius of pinch rolls are very important for determining pinch force. Moreover, the rule of deforming and stress distribution of different 〓 ratio were gained on condition that the deforming was considered to be non-uniform distribution in the gap. The differential equations were got that calculate the displacements of large deflection of elastic cantilever rectangle plate with fixed end and the formula of the Finite Strip Method was conducted to study the regularity of mid-plane displacements, deformation and stresses for elastic-plastic large deflection bend of cantilever parallelogram plate with fixed or slidable end by integrating Prandtl-Reuss equation.

建立了一套完整的设计参数计算公式和在成型过程中理想带钢或具有月牙弯带钢的工艺参数的调整公式；在考虑摩擦力的条件下，对两弹性体接触变形过程中的接触变形区长度和接触弧半径用位移解法进行了研究，推导了板带递送机的递送力计算公式，从而得知在递送机设计过程中，应选择适当摩擦系数和辊身直径；另外，还从辊缝内带钢实际变形出发，分析了对于不同的〓值，带钢的变形规律及应力分布状况；建立了固定端悬臂矩形板弹性大挠度弯曲变形的控制方程，并且在对Prandtl-Reuss方程的积分处理的基础上，导出了固定端和滑动端悬臂平行四边形薄板的弹塑性大挠度的中面伸展位移、变形和应力的有限条元法公式，编写了Fortran语言计算程序，在各种参数条件下，对螺旋焊管成型过程变形规律进行了全面的分析研究，从而为螺旋焊管的生产和进一步的改进提供了理论依据。

See Casparian strip; passage cells.

参见 Casparian strip； passage cells。

A method of polygon simplification based on Strip-Tree in scaleless GIS is presented in this paper through an all-sided analysis of this problem. Maintaining the correctness of the polygon layer's topoloty, it simplifies the polygon layer according to the output scale.

在对此问题进行全面分析的基础上，提出了一种基于Strip-Tree的多边形图层化简策略，在保持输出数据拓扑结构正确的前提下化简多边形图层，且保持了较高的时空效率。

Away and away the aeroplane shot, till it was nothing but a bright spark; an aspiration; a concentration; a symbol (so it seemed to Mr. Bentley, vigorously rolling his strip of turf at Greenwich) of man's soul; of his determination, thought Mr. Bentley, sweeping round the cedar tree, to get outside his body, beyond his house, by means of thought, Einstein, speculation, mathematics, the Mendelian theory—away the aeroplane shot.

飞机越飞越远，直到它看不见了，变成了一点火星，一种热切，一种浓缩，一种象征（在 Bentley 先生看来就是这样，精神旺盛地旋转着他的 strip of turf 在格林威治），代表着男人的灵魂；代表着他的意志， Bentley 这样想着，掠过雪松，试图冲出他的身体，跃出他的屋子，依靠思想，爱因斯坦，思索，数学，孟德尔法则——飞机飞远了。

The sticking of cold rolled strip is related with the physical properties of strip itself and stress, which is in～duced by coiling, cooling, harmful shape, convexity, annealing, uncoiling and the coarse degree of strip surface and strip strength.

分析了宝钢冷轧薄板粘结的形成原因，与生产中各工序产生的应力和带钢本身的物理性能有关，即与轧机卷取应力、轧后冷却应力、板形应力、板凸度应力、退火过程内在热应力、平整开卷应力、带钢表面粗糙度和带钢的强度有关。

The objectives of this paper were to investigate the simulation and design of continuous multiple-station rolling forming process for a U-Section Steel Bar by CAE software-DEFORMTM Due to the limitation of elements number using a short strip 120mm went through all the stations to simulate the real continuous rolling forming on factory The roller gap was fixed as 0 30mm roll speed was 20 rad/sec and progressive angles were all equal for each rolling process which were the formed angle divided by by the number of station Three rolling processes were selected with 6 9 and 12 stations respectively During simulation processes two cases occurred Case A the strip was through a single station Case B the strip across two stations Because the strip laterals side was stretched and twisted during the process The model of case B closer to the practical process than case A and the calculated stress and strain on the tip of U section for case A were lower than these for case B by up to 15% From the result of case B for each process the stress for 12-station process was smallest 9-station process second and 6-station process next Because less-station can save larger cost and forming time but the bigger stress and strain for 6-station caused wrinkles on lateral sides not found on 9-station and 12-station Therefore 9-station process was a more suitable design than 12-station process smaller stretched and twisted and stress The progressive angles for 12-station was 7 5?

本文主要是以DEFORMTM有限元素软体模拟U型钢片连续道次成型与单一道次成型以确认单一道次模拟的是否可取代连续道次模拟之研究。因DEFORMTM 软体对於网格元素上的限制故使用较短素材120mm通过所有的成型站以模拟工厂实际连续成形方法。辊轮间隙固定为0 3mm；辊轮转速为20 rad/sec；弯曲角度的方法为将成型角度平均除以成型站数。有三种辊轮成型方式被选择分别为6站，9站，与12站。在模拟的过程中有两种现象会产生 Case A，素材通过单一成型站。Case B，素材会通过两个成型站。因为在模拟过程中素材的两端会有拉应力与扭力。Case B的模拟比Case A像实际的制程，并计算应力与应变在U型断面的Tip部中可发现Case A比Case B低约15%。从Case B的每站的结果可以得知，12站的成型应力最小，9站次之，6站最后。

Semiconductor research and analysis company, VLSI Research, has projected continued strong growth in probers and rapid growth in strip test.

著名的美国半导体研究分析公司—VLSI研究中心，曾预测晶圆行业的持续有力增长，特别是strip测试行业，更将呈现快速成长的趋势。

The hanging strip device includes: a hanging strip device main body; a winding section for performing the winding of the hanging strip; a winding auxiliary section, which is configured at a state that the rotation relative to the hanging strip device main body is limited and can move between the first preset position and the second preset position relative to the winding section, wherein, at the first preset position, the rotation of the winding section makes the hanging strip wrap is restricted, at a second preset position, the winding section can perform the drawing-out rotation for drawing out the hanging strip; a force applying part, which applies a press pressure to make the winding auxiliary section at the first preset position; and a convex part which allows the winding auxiliary section to be at preset point contact status relative to the hanging strip device main body when the winding auxiliary section is at the first preset position.

置在该吊带装置主体内，而且能够在第一预定位置和第二预定位置之间相对于上述卷绕部移动，其中，在上述第一预定位置，上述卷绕部的使上述吊带回绕的旋转被限制，在上述第二预定位置，上述卷绕部能够进行用于抽出吊带的抽出旋转；施力部，其施加将上述卷绕辅助部按压向上述吊带装置主体的按压力，以使该卷绕辅助部处于上述第一预定位置；和凸起部，其设置于上述卷绕辅助部或者上述吊带装置主体的任一方，在该卷绕辅助部处于上述第一预定位置时，上述凸起部使该卷绕辅助部相对于上述吊带装置主体成为预定的点接触状态

In the negative and interrogative forms, of course, this is identical to the non-emphatic forms.

。但是，在否定句或疑问句里，这种带有"do"的方法表达的效果却没有什么强调的意思。

Go down on one's knees;kneel down

屈膝跪下。。。下跪祈祷