查询词典 simple elongation
- 与 simple elongation 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
A rapid, efficient protocol to detect the toxicity of Cu2+ stress using wheat coleoptile, which is simple, uniformal in structure and sensitive, was established. By using this model, the mechanism of Cu2+ stress leading to the inhibition of cell elongation was also studied.
本文以小麦为材料,研究不同浓度Cu2+对小麦种子萌发和幼苗生长的影响及机理;利用小麦胚芽鞘结构简单、反应敏感的特点,探索建立小麦胚芽鞘快速检测铜离子毒害模式,并利用此模式研究了铜离子胁迫对细胞伸长抑制作用的机理。
-
Here's a simple way to learn the elongation and relaxation phases of twists.
这里有一个简单的方法来学习,在逐步的扭转中拉长和放松上半身。
-
It has been found that there are some texture flaws such as large grain、badly distorted twin and streaky structure. But recrystallization grains ofaround 19μm in diameter on average are obtainable through heat treatment at300℃for 30min by air-cooling, meanwhile the twin and streaky structurethat would weaken the plasticity of alloy are eliminated; significant elementsare holding temperature、holding time、cool-down methods. Mechanicalproperties of tube are obtained, simple tension elongation ratio of arc testsample increases from 10.8% to 20.1%, elongation ratio with elastic internaldie of tube increases from 8.0% to 14.9%.
研究结果表明:挤压成型的AZ31镁合金管材组织中存在变形程度很大的孪晶、大尺寸晶粒、丧失了进一步变形能力的条带状组织等易导致后续塑性加工时变形不均,引起断裂的组织缺陷;采用最佳等温热处理工艺以20℃/min加热至300℃保温30min后空冷处理可以使试样平均晶粒直径从挤压态的50μm细化为19μm,同时基本消除上述组织缺陷;明显影响热处理效果的因素为保温温度、保温时间、冷却方式;室温下,采用最佳工艺热处理前后管材弧形试样的单向拉伸伸长率由10.8%提高至20.1%,管件的自由胀形极限伸长率由8.0%提高至14.9%。
-
Here's a simple way tolearn the elongation and relaxation phases of twists.
这里有一个简单的方法来学习,在逐步的扭转中拉长和放松上半身。
-
While this is being done, a supersonic nozzle injects a high-velocity gas jet in the area of the cut. The viscous molten material produced is then quickly stretched and cooled by the gas jet in a simple elongation process, to yield a disordered net of intertwined amorphous micro- and nano-fibres.
接著,以超音速喷嘴将高速气体注入熔融区,黏稠的熔融材料在简单的拉伸过程中藉由喷气快速冷却,产生一个非晶体微纳米纤维纠结成的网状结构。
-
The results show that Bi and Sb are mainly distributed on grains and grainboundaries, and Bi on grainboundaries there are mainly simple substance Bi particles, Sb in grains are intermetallics containing stibium. The tensile strength, yield strength, elongation and variation of area of halfhard brass containing bismuth and stibium are 478.9 MPa, 295 MPa, 15.1% and 29.3% respectively. Corresponding to HPb59-1, the cutting property of brass containing bismuth and stibium is excellent. The brass containing bismuth and stibium shows excellent dezincification corrosion resistance, and the depth is 323 μm.
结果表明:添加的Bi和Sb主要以单质或化合物方式存在于无铅黄铜的相内和相界处,Bi以单质颗粒存在于相界处,Sb以化合物形式存在于相内,这对提高合金切削性能有利;添加Bi和Sb黄铜的抗拉强度为478.9 MPa,伸长率为15.1%,断面收缩率为29.3%,屈服强度大约为295 MPa;添加Bi和Sb黄铜的切削性能比HPb59-1铅黄铜的优,合金的脱锌腐蚀性能良好,脱锌层厚度约为323 μm。
- 推荐网络例句
-
I didn't watch TV last night, because it .
昨晚我没有看电视,因为电视机坏了。
-
Since this year, in a lot of villages of Beijing, TV of elevator liquid crystal was removed.
今年以来,在北京的很多小区里,电梯液晶电视被撤了下来。
-
I'm running my simile to an extreme.
我比喻得过头了。