查询词典 silicon steel

MgO-C major producers, aluminum MgO-C, Al-Mg is not brick, aluminum spinel carbon bricks, low-carbon non-carbon brick, aluminum silicon carbide bricks, skateboards brick, nozzle brick, block bricks, a steel I brick, air brick, precast tundish board,×, brick, iron groove materials, castables, gunning materials, the bottom tie material, combined with 13 major series, etc.

主要生产镁碳砖、铝镁碳砖、铝镁不烧砖、铝尖晶石碳砖、低碳无碳砖、铝碳化硅砖、滑板砖、水口砖、座砖、出钢口砖、透气砖、中间包预制板、高铝砖、粘土砖、铁沟料、浇注料、喷补料、炉底打结料、结合剂等13大系列40多个品种，产品畅销国内30多家大中型钢铁企业，并出口德国、乌克兰、澳大利亚、越南和伊朗等20多个国家和地区。

To restore the ability of chromium can be dissolved in sulfuric acid, hydrochloric acid and High-FE acid and release hydrogen, but also of pure chromium with aqua regia does not work, when there is the presence of halogen ions in the acid can not be long-term stability, high temperature with alkali, hydrogen sulfide, sulfur steam, phosphorus, ammonia, such as carbon monoxide and water vapor reaction of the corresponding compounds, in the high temperature reaction of silicon into the silicide also chromium, chromium alloys with many metals generate a wide range of industrial applications, such as chromium-manganese stainless steel is used extensively for chemical plants.

铬的还原能力强，能溶于硫酸、盐酸和高FE氯酸而放出氢气，但纯铬连王水也不起作用，当有卤素离子存在时，在酸中不能长期稳定，高温时能与强碱、硫化氢、硫蒸汽、磷、氨、一氧化碳和水蒸汽等反应生成对应的化合物，在高温下还能与硅反应成硅化铬，铬能与许多金属生成合金广泛在工业上应用，如铬锰不锈钢大量用于化工设备。

This lamp is the sources of energy with monocrystalline silicon solar energy cell or polycrystalline silicon solar energy cell; The storage battery is nickel hydrogen battery or nickel cadmium battery; That lamp holder and the lamp pole adopts casts aluminium or the stainless steel material manufacturing; The lampcover adopts the toughened glass manufacturing, and the light source is the light source with high brightness LED's light emitting diode; The colour can be divided into the white and yellow, redness, orange, green and blue and seven colours become light.

该灯以单晶硅太阳能电池或多晶硅太阳能电池为能源；蓄电池为镍氢电池或镍镉电池；灯座和灯杆采用铸铝或不锈钢材料制造；灯罩采用钢化玻璃制造，光源以高亮度 LED 发光二极管为光源；颜色可分为白色、黄色、红色、橙色、绿色、蓝色和七彩变光。

The process to substitute ferro-silicon-aluminium with ferro-silicon-aluminium-barium as end deoxidizer is discussed. It is considered the process can be used for production because of the good casting performance of melting steel and distinguished economic profit.

对河北敬业钢铁有限公司炼钢厂用硅铝钡铁代替硅铝铁作终脱氧剂工艺进行了探讨，认为该工艺是可行的，钢水浇注性能良好，并且可获得明显的经济效益。

During the steel-making process,use the silicon aluminum alloy makes the deoxidizer can improves the use of the aluminum more than one time than use the independent pure silicon.

在炼钢过程中，使用硅铝合金比单独使用纯硅作脱氧剂对铝的利用率可提高一倍以上。

Steel, Stainless Steel (304, 316, 410), Brass, Silicon Bronze, Nylon, Aluminum and Monel.

钢，不锈钢（304、316、410），黄铜，硅青铜，尼龙，铝和蒙达尔合金。

A steel plate having a tensile strength of at least about 930 MPa (135Ksi), a toughness as measured by Charpy V-notch impact test at least about 120 joules (88 ft-lb), and a microstructure comprising at least about 90 volume percent of a mixture of fine-grained lower bainite and fine-grained lath martensite, wherein at least about 2/3 of said mixture consists of fine-grained lower bainite transformed from unrecrystallized austenite having an average grain size of less than about 10 microns and comprising iron and specified weight percentages of the additives: carbon, silicon, manganese, copper, nickel, niobium, titanium, aluminum, calcium,rare earth metals, and magnesium, is prepared by heating a steel slab to a suitable temperature; reducing the slab to form plate in one or more hot rolling passes (10) in a first temperature range in which austenite recrystallizes; further reducing said plate in one or more hot rolling passes (10) in a second temperature range in which austenite does not recrystallize, quenching (12) said plate to a suitable quench stop temperature (16); and stopping said quenching and allowing said plate to air cool (18) to ambient temperature.

一种钢板，其抗拉强度至少约930MPa135ksi），在－40℃（－40°F）下，采用夏氏V型缺口冲击试验测定的韧性至少约120焦耳（88英尺－磅），并且其显微组织包含至少约90％体积的细晶粒的下贝氏体和细晶粒的板条马氏体的混合物，其中该混合物的至少约2／3由从平均粒径小于约10微米的未再结晶奥氏体转变而来的细晶粒的下贝氏体组成，而且，其中所述的钢板包含铁和特定重量百分比的添加元素：碳、硅、锰、铜、镍、铌、钛、铝、钙、稀土金属和镁，所述钢的制备过程为：将一钢板坯加热至一个适当的温度；在奥氏体可发生再结晶的第一个温度范围内，采用一个或多个热轧道次（10），将所述板坯轧制成板材；在奥氏体不发生再结晶的第二个温度范围，采用一个或多个热轧道次（10）进一步轧制所述板材；将所述板材淬火处理（12）至一个适当的淬火终止温度（16）；停止所述淬火处理并将所述板材空冷（18）至室温。

An ultra-high strength, weldable, low alloy steel with excellent cryogenic temperature toughness in the base plate and in the heat affected zone when welded, having a tensile strength greater than 830 MPa (120 ksi) and a micro-laminate microstructure comprising austenite film layers and fine-grained martensite/lower bainite laths, is prepared by heating a steel slab comprising iron and specified weight percentages of some or all of the additives carbon, manganese, nickel, nitrogen, copper, chromium, molybdenum, silicon, niobium, vanadium, titanium, aluminum, and boron; reducing the slab to form plate in one or more passes in a temperature range in which austenite recrystallizes; finish rolling the plate in one or more passes in a temperature range below the austenite recrystallization temperature and above the Ar3 transformation temperature; quenching the finish rolled plate to a suitable Quench Stop Temperature; stopping the quenching; and either, for a period of time, holding the plate substantially isothermally at the QST or slow-cooling the plate before air cooling, or simply air cooling the plate to ambient temperature.

在基体板以及焊接时的热影响区处的低温韧性优异的超高强度、可焊接、低合金钢具有高于830MPa（120ksi）的抗拉强度，并且具有包含奥氏体薄膜层和细晶粒的马氏体／下贝氏体板条的显微层状组织，所述钢的制备过程为：加热含有铁以及特定重量百分比的添加元素的钢坯，所述添加元素为碳，锰，镍，氮，铜，铬，钼，硅，铌，钒，钛，铝，以及硼中的一些或全部；在奥氏体可发生再结晶的温度范围内，采用一个或多个道次，将所述钢坯轧制成板材；在低于奥氏体再结晶温度但高于Ar 3 转变点的温度下，采用一个或多个道次对所述板材进行终轧；将所述终轧板材淬火至一适当淬火终止温度；停止所述淬火；或者在空冷前在QST点基本等温保持所述板材一段时间，或者对所述板材进行缓慢冷却，或者只是简单地将所述板材空冷至室温。

The study compared the xonotlite synthesized by crystal silicon and amorphous silicon mixed with calcium oxide and treated in the sealed steel alloy autoclaves, the synthesize temperature and time were studied.

采用晶体与非晶态硅质原料，与氧化钙在高压釜中进行动态水热反应，合成晶须状硬硅钙石晶体，研究合成温度，保温时间等工艺参数对最终结晶产物的影响，并使用XRD、SEM对水热合成的产物进行分析。

1Mm ~~ 500mm2024: 2.5mm ~ 300mm 5052:0.4 mm ~ 100mm2, copper alloys: brass, brass environmental protection the minimum diameter of 1.5mm, maximum diameter 120mm , copper, tungsten copper, bronze (high, medium and low, chromium bronze, phosphor bronze, aluminum-bronze, silicon bronze, manganese Bronze, tin bronze, wear-resistant copper, copper alloy, copper Cup with disabilities (including plate, rod, row, ribbons, sticks, pipes, lines), such as several varieties. 3, China imported stainless steel material (304 , 301,316,202, including plates, rods, line and belt, sticks, Pai, possession) and many other industrial raw materials, as well as titanium, titanium rods. 316 diameter of the smallest of imports of stainless steel wire 0.2mm , maximum diameter of 15mm.

1mm~~500mm2024：2.5mm~300mm 5052：0.4mm~100mm2、合金铜材：黄铜、环保黄铜（最小直径1.5mm，最大直径120mm、红铜、钨铜、铍青铜、铬青铜、磷青铜、铝青铜、硅青铜、锰青铜、锡青铜、耐磨铜、合金铜、杯士铜（其中包括板、棒、排、带、枝、管、线）等数种品种。3、国产进口不锈钢材料（304、301、316、202中包括板、棒、线、带、枝、排、管）等多种工业原材料，以及钛板、钛棒。316不锈钢线进口直径最小0.2mm，最大直径15mm。

For a big chunk of credit-card losses; the number of filings (and thus charge-off rates) would be rising again, whether

年美国个人破产法的一个改动使得破产登记急速下降，而后引起了信用卡大规模的亏损。

Eph. 4:23 And that you be renewed in the spirit of your mind

弗四23 而在你们心思的灵里得以更新