查询词典 shearing

This degeneration is attributed to two reasons, the first one is the reduction of effective pressure due to the increment of super pore pressure; another one is the change of soil's structure attribute to the cumulated of plastic shearing strain.

退化主要由两方面的原因引起：一是超孔隙水压力的产生而导致有效应力的降低；二是塑性残余变形的累积导致土体内部结构发生了改变。

The results show that the additional shearing strain different from the normal compression deformation is generated in asymmetric rolling process. The more the different ratio of diameter,the greater the additional shear...

结果表明：在非对称轧制条件下会产生不同于普通压缩变形的附加剪切变形，而且异径比越大，产生的附加剪切变形也越大。

The effects of material's yield strength,shearing strain,rotating inertia and the substructures on vibration aging during the components resonance were investigated so as to get some theoretical support to vibration aging mechanism and practical technology research.

对构件共振时的屈服极限、剪切变形以及转动惯量和子结构的作用进行考察，以期为振动时效机理和工艺基础研究提供部分理论上的支持。

Then, the quasi-overconsolidation ratio is introduced to consider the effect of super pore pressure; and the fitting formulation is applied to consider the influence of shearing strain. The degenerated formulation of undrained strength of saturated loess is deduced at last; and its reasonableness is proved by the test results.

在此基础上，引入似超固结比的概念来考虑超孔隙水压力的影响，应用拟合公式来考虑剪切变形的影响，最终推导出了饱和黄土不排水强度的退化公式，与试验结果的对比证明了理论公式预测结果的合理性。

The rheologic and non-Newtonian feature of lubricant that is used for elastic-plastic hydrodynamic lubrication is analyzed, under the condition of high pressure and large shearing strain ratio. The influence factors of oil film thickness and pressure forming during bar drawing are also discussed.

对于有限变形弹塑性有限元中求解非线性方程组的具体方法作了深入的探讨，提出了采用修正牛顿法时可应用过量修正技术加速其收敛效果，为有限变形弹塑性有限元的应用提供了新的计算方法。

During the process, following were considered:the effects of variable radius of cross section on the vertical bending deflection angle, noncoincidence of torsional center and gravity center, the effect of transverse shearing strain on energy of strain.

推导中除考虑曲率变化、截面形心和剪切中心分离、梁的横向剪切变形影响等因素外，还考虑了曲率沿横向变化对竖向挠转角的影响。

So this model can simulate all kinds of properties of concrete after loading, such as nonlinear stress-strain relationship for concrete, stiffness phenomenon under cycle load, phenomenon compression and expansion for concrete with shearing, strain soften phenomenon while beyond strength limit. Furthermore because the best merit of this model is simple in expression, model parameters are determined more easily and application is convenient easily.

可以模拟混凝土受力后的各种特性，如混凝土的非线性应力—应变关系，循环荷载作用下的刚度退化现象，剪力引起的混凝土的压缩和膨胀现象和超过强度极限的应变软化现象等，且这种模型的最大优点是表达形式简单，模型参数比较容易确定，便于应用。

Asymmetric hot rolling ; deformation ; shearing strain ; FEM

非对称热轧；变形；剪切变形；有限元法

In this paper, based on the triaxial test, it is discovered that the structured loess has special mechanical effect of shearing strain rate, and it is proved that the structured loess also has the phenomena of strain rate softening. The CU shear strength and cohesion c increase at first, then decrease with the increase of strain rate, and a critical rate exists; the angel of internal friction doesn't change visibly with the strain rate.

通过结构性黄土三轴试验研究，发现结构性黄土具有独特的剪应变速率力学效应，"应变速率软化"现象同样存在于结构性黄土中；其CU剪切强度和凝聚力c随剪应变率的增大而呈现先增大后减小的特征，存在临界速率现象，而内摩擦角随剪切速率的增大基本上呈线性减小的趋势。

Using the edited program, the deflection, stresses on three directions, principal stresses, maximum shearing stress and principal strain at any computing point under any number of wheel loads in a road pavement structure with any number of layers could be computed.

本文叙述如何根据非轴对称半空间弹性体应力和位移的基本表达式以及由多层体系边界条件建立的线性方程组编制计算机程序，运用巳编制的计算程序，可在袖珍计算机和微型计算机上求得多层弹性体系内任意点的应力和位

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。