查询词典 shearing deformation

The total strain of a porous medium is an algebraic sum of primarystrains and structural strains.Primary strain is caused by the deformation insideparticles of porous media,while structural strain by the relative displacementsbetween particles.

本体应变是由构成多孔介质的骨架颗粒单元体本身的变形所导致的介质应变量，而结构应变则是由颗粒之间的相对位移所导致的介质应变量。

The aliment of limb had been changed when the meniscus removed, that was the cause of knee joint deformation.

五、膝关节模拟实验，表明半月板的缺失可以造成下肢力线的变化。

The study on stress-deformation calculation method of high CFRD built on thick alluvium deposits has both theoretically significance and application value.

因此，系统地研究覆盖层上面板堆石坝的应力变形性状及其计算方法具有重要的理论意义和实用价值。

Finally, the idea of using new numerical method such as Discontinuous Deformation Analysis and Numerical Manifold Method to simulate the joint of CFRD is proposed, which can make guidance on the design and calculation of CFRD built on thick alluvium deposits.

提出引进新的数值方法，如不连续变形分析方法和数值流形方法，来模拟和计算面板坝接缝变形的设想，对深覆盖层上面板堆石坝的设计和计算有指导意义。

A numerical simulation technique based on the stable alternating direction implicit method and the upper bound element technique is presented and applied to simulations of extrusion directly following liquid infiltration which involves infiltration,solidification, and large plastic deformation in one process.

采用稳定的交替方向隐式有限差分方法、上限元法等数值计算方法模拟了融浸渗、凝固和大塑性变形为一体的液态浸渗后直接挤压的工艺过程。

In order to figure out the use of compression in the wood preservation aspect, the authors compared the compressed wood samples pretreated with hot water bath or water spraying and compressed preservative-treated wood, which was treated with ammine copper quat-type D preservative solution. The liquid absorption and recovery rate of compression deformation of the compressed wood were determined, as well as the surface hardness, distribution of density and CuO retention in the thickness direction of CPW.

摘要为研究压缩处理在木材防腐方面的应用，该研究测定了经过不同水浴和喷水预处理后的径向压缩木材在胺溶铜季铵盐--D型防腐剂中浸泡后的吸液量和变形回复率，并测定了由此制备得到的压缩防腐木的表面硬度、厚度方向上的密度分布和CuO保持量分布情况。

Deformation experiment of amphibolite ; Qinghai Xizang plateau

角闪岩变形实验；青藏高原；地壳低速层

A reciprocal FEM analogue method is brought forward, by means of taking into account the interaction of tunneling, the peripheral soil and underground utilities. And the calculating program, DLFEA-TPR, is developed to calculate the tunneling-induced deformation and stress of adjacent utilities.

考虑隧道开挖与周围土体以及地下管线的相互作用，提出了相应有限元模拟方法，开发了隧道施工引起邻近地下管线变形及应力的计算程序DLFEA—TPR。

We think that the coupling dynamical modeling offlexible multibody system should be established on continuum mediummechanics and analytic dynamics and making the coupling dynamicalmechanism between large overall motions and deformation motions clear.

本文认为柔性多体系统刚-柔耦合动力学建模应从连续介质力学和分析动力学出发，合理地描述柔性体的变形运动，才能探明大范围运动和变形运动之间的耦合动力学机理。

The basic approach of protecting people from being hurt or killed in an accident is to improve crashworthiness of vehicles. This paper starts with discussing theories and methods for vehicle passive safety design, which included experiential methods, analytic methods, multi-body dynamics methods, crash test methods and the finite element method. Emphasis will be paid to the basic FEM theories and algorithms of impact problems. Topics discussed include the governing equation, element discretization, hourglass control, time integration, material model, shell element algorithms and contact-impact algorithms. For more reliable simulation results, this paper then conducts study on how to accurately get material model parameters by combining the FEM method with experimental method, and develops relevant material test machine and parameter calculating software. Based on that, basic typical impact simulation and test validation study are conducted. On the basis of the above work, the paper studies the thin-shell structures'crashworthiness, which was affected by the following factors: spot-weld features, shell thickness, cross-section and pre-deformation. As to vehicle parts'crashworthiness, the paper conducts simulation study of designing energy-absorbing steering system and adaptive airbag system. A practical energy-absorbing steering wheel is designed as an example. In further depth research, the paper suggests several inverse quantificational methods for vehicle crashworthiness design based on the ideal crash characteristics. The above theories and methods are applied with good results through several practical vehicles' crashworthiness design and improvement.

文中对汽车碰撞安全性的设计理论和方法进行了归类和总结，其中包括经验法、解析法、多刚体动力学法、试验法以及有限元方法等；重点介绍了碰撞有限元法的基本理论和有关算法，涉及到有限元求解控制方程、单元离散、沙漏模态控制、时间积分、材料模型和应力修正、薄壳单元算法以及接触碰撞界面算法等，探讨了有限元计算中的材料模型参数获取技术，开发了相应的材料试验装置及材料模型参数反求软件，在此基础上进行了基本的碰撞仿真算例和试验对比研究；文中通过应用有限元方法研究了薄壁构件的碰撞吸能特性，指出了设计薄壁吸能构件时需要考虑的几个主要影响因素，即焊点、壁厚、横截面和预变形等；在关于车辆部件的碰撞安全性能设计中进行了吸能转向机构和自适应安全气囊的仿真研究，提出了吸能转向机构和自适应安全气囊的仿真研究方法；文中最后探讨了整车碰撞性能的设计与改进方法，提出了以理想碰撞特性为目标，采用分段加速度或者根据碰撞时间进行设计的反推设计法、部件吸能仿真优化设计法等量化设计方法，并通过综合应用文中所讨论的相关技术进行了整车碰撞性能的设计与改进实例研究，所选定的车型是大众化的普通轿车和碰撞安全性基础较差的微型面包车，研究结果表明，本文所提出的设计与改进方法是适用而有效的，具有重要的工程实用意义和价值。

It is suggested that TDS can be used as a new method for the analysis of pedogenesis and climatic change.

总之，热处理过程中磁化率的变化能非常灵敏地反映磁性矿物的转化情况，而且，这种转化往往与样品所经历的土壤化作用强度密切相关，因此，TDS可做为分析成土作用强度和古气候变化的一种新方法。

Therefore, in this chapter, I will research into the conflict and contradiction of the paternity. Also, in this novel, the father's behavior of "He who loves well chastises well." is quite suspicious, one of the reasons is that the father thought his son belonged to him. And then, this thesis quoted Lacan's theory to touch upon that someone who has accepted the concept of patriarchal society, he will be influenced for his whole life. That also reveals that human being has no choice sometimes in this society.

因此本章会先就父子关系的冲突与矛盾做深入的探讨，小说中的父亲似有对儿子爱之深责之切的行为，其原因可能在於父亲将儿子视为所有物所致；其次，论文将引用拉冈相关理论，讨论在父权社会中，不论身分为何，只要是已受父权社会观念根深蒂固影响的人物，终生都将受其所苦，此也揭示出人生存於社会上的无奈。