查询词典 separation point

Critical point data for these dilute SCF-cosolvent binary and ternary systems are imperative for the design of efficient supercritical separation and reaction processes. So that, it is very important to study the critical point data in binary and ternary systems.

这些超临界流体—共溶剂体系的临界点数据对于超临界萃取和反应来说是非常重要的理论参数，因此研究这些二元和三元体系的临界点数据是非常有意义的。

In addition, spot color screen angle in software will normally be preset to 45 ° c (45-degree, is considered the most comfortable utilizinghuman-aware, so that the angle of the dot is arranged in horizontal and vertical lines to equal rotation, you can reduce the human ability to mesh point detection), if a Duotone image or data file into the existing business card printing and membership card making four color black%(General in the four-colour screen business card printing and membership card-making Black mesh point-and-drop, in a 45-degree is 0 degrees for yellow, magenta to 15 degrees, 75 degrees), and spot color, or with more than two spot colors, the color screen is to a 45-degree output, so use the spot color, while if it is possible with other screening to overprint colors, you must open the output color separation software color settings or the print dialog box, on the halftone angles to make modifications.

另外，专色的增网角量在软件洋凡是城市预撤为45量（45量均被觉得是人眼感知最安适的角量，让网不背摆列在与程量和垂直线不败不等角量的标的目的上可以裁减人眼差网不背的发现本领），若是一个单色调影像或是数据文件洋既有制卡和会员卡制息四色暗不败外（凡是在四色增网制卡和会员卡制息洋，不兵暗网不背不收在45量，黄为0量、品赤为15 量、青为75量），又有专色，或者是有两个以上专色，则在分色增网时城市以45量输入，所以在差专色搁置浅网时，如果有不定与其他增网颜色有叠印，则务必在分色输入时开放软件颜色撤定或打印撤定的差话框，差专色增网角量举动编削。

The measurement equation of four point method and three point method flat form error separation is given.

列出了四点法－三点法平面误差分离的测量方程，导出了这类方法所对应系统的传递函数G的通式，指出G（0，0）＝0是平面形状误差赖以先行分离的先决条件。

The conclusions were as follows: theνO-H andνC=O IR absorption maxima shifted towards higher wave numbers after imprinting 17β-estradiol on TFMAA-co-TRIM copolymer with the red shift of theνO-H groups being apparent after precipitation polymerization for 16h while that forνC=O groups being observed after polymerization for 24h. A strong interaction between TFMAA and 17β-estradiol was confirmed by the high selectivity for 17β-estradiol, as indicted by the values of the separation factor of isomers of 17β-estradiol/17α-estradiol (2.28) and the imprinted factor (3.01). Particle diameter of TFMAA-co-TRIM polymer was between 300 nm and 1.5μm, which suited well for solid phase sorbent throughout at low column pressure. The recognition of imprinting TFMAA-co-TRIM polymer for sterol molecules was driven by enthalpy eluted with acetronitile, and low temperature was in favor of the separation of sterol structure analogues on imprinting column. TFMAA-co-TRIM polymer possessed of determinate anti-heat stability, with melting point beginning at 255.84℃, Tp=257.40℃, control TFMAA-co-TRIM polymer and imprinting TFMAA-co-TRIM polymer were respectively decompounded at 267.79℃and 343.11℃, and solid micro-extraction noddle prepared by the special polymerization also showed definite recognition for 17β-estradiol by GC/MS detecting at 270℃. By selection of various washing and elution solvents, elution reagents of close polymerization system were of more advantage in template molecules retention and recognition on molecularly imprinted solid phase extraction column. At a certain extent, progesterone, 17α-estradiol, 17β-estradiol and 4-androstene-3, 17-dione could be intercepted on the MISPE column. Especially, MISPE had high selectivity for progesterone, and imprinting TFMAA-co-TRIM polymer could achieve adsorption balance within 50 min by absorption kinetics test for 17β-estradiol. However, MISPE column showed better selectivity and enrichment property for 17β-estradiol than C18 and CSPE columns according to the data from HPLC and GC/MS analyses. Recovery of 17β-estradiol on MISPE column was up to 85.5% while when prime extracting solution of milk powder was sampled, the recovery of CSPE and C18 columns were 43.7% and 30.7%, respectively.

通过研究阐明：紫外聚合产物TFMAA-co-TRIM中的νO-H振动吸收峰在聚合16h后红移，νC=O振动吸收峰在聚合24h后红移；TFMAA-co-TRIM对雌二醇异构体的印迹因子达到了3.01，α为2.28，优于其它功能单体参与得到的聚合物识别特性；TFMAA-co-TRIM聚合物粒径介于300 nm至1.5μm之间，作为色谱固定相具有良好的通量和低的柱压；在乙腈流动相中，TFMAA-co-TRIM分子印迹固定相的分离过程主要被焓驱动，低温有利于分子印迹固定相分离甾醇结构类似物；TFMAA-co-TRIM分子印迹聚合物在255.84℃时开始熔融，Tp=257.40℃，聚合物CP的降解温度在267.79℃，MIP降解温度在343.11℃，制备的固相微萃取头初步经GC/MS 270℃的耐热性测定；不同的洗提溶剂筛选证明了选择接近聚合溶剂的洗脱体系更有利于MISPE发挥识别效应；分子印迹固相萃取柱对孕酮、17α-雌二醇、17β-雌二醇和雄烯二酮都具有不同程度的保留特性，可作为此类化合物的吸附材料，特别对孕酮强保留的富集特性，可作为孕酮的选择性识别吸附剂，其分子印迹聚合物对17β-雌二醇的吸附动力学测定显示在50 min内基本达到吸附平衡，具有作为传感器核心敏感材料的潜力；对比萃取奶粉中17β-雌二醇性能，MISPE柱比非分子印迹固相萃取柱和C18柱具有更高的保留，回收率依次为85.5%，43.7%和30.7%。

Xie-Beni index decreases with the number of partitions increasing. It is difficult to choose the optimal partition of data when the number of clusters is large. From the point of view of the compactness and the separation of clustering, a novel clustering validity function is proposed, which is based on the improved Huber Г statistic combined with the separation of clustering.

针对此问题，分别考察改进的Hubert Г统计量和聚类分离度，导出一个新的基于数据几何结构的聚类有效性函数，使得它有惟一的最大值，函数值随聚类个数增大而递减的趋势并不影响最优聚类个数的判定。

An on-line blind source separation algorithm of non-stationary mixed signals is presented. The algorithm uses the multiple time-delayed decorrelation and natural gradient rule to obtain the stationary point of the cost function, only a small number of observed samples is needed to minimize the Frobenius norm of the correlation matrices, so the computing cost is low and continuous separation calculation could be realized by on-line operation.

利用一种基于多时延解相关准则的代价函数和自然梯度原则，分别推导出非平稳信号在瞬态线性混合及卷积混合情况下的在线盲分离算法，仅通过对有限个时延样本的相关矩阵进行Frobenius范数最小化运算得到分离矩阵，计算工作量小，无需对样本进行分块处理，可实现对信号的连续跟踪操作。

This is based on such concept that the flow separation at any point of blade surfaces could be prevented if separation is prevented at most aggravative pressure diffusion section during wakes sweeping.

本文提出了一种引入非定常因素的设计思想，即这样来设计叶型，使尾迹非定常扫掠过程中出现的最严重的扩压过程不发生气流分离。

In this paper, some characteristic functions of the multifunctional single-flank mesh gear tester of model CD320G-D which is applying gear integrated error measuring technique, computer technique, error separation technique, fault diagnosis technique and error prediction technique, including automatic searching of profile error start point, determination of profile barrelling, separation of profile form error and profile slope error, measurement of profile error with evaluation range subtracting tooth tip, measurement of tooth topograph and statistical analysis of gear manufacture error, are presented.

阐述了综合应用齿轮整体误差测量技术、计算机技术、误差分离技术、故障诊断技术和误差预报技术的多功能 CD320G-D 型单啮仪的一些具有特色的功能。这些功能包括齿形误差起测点的自动找定、凸形齿凸形量的测定及其形状误差与倾斜误差的分离、取值范围扣除齿顶部的齿形误差的测量、齿面轮廓度误差的测量以及齿轮加工误差的大样本统计分析。

B light to intermediate transfer website performance is if the full-color printed a thick and strong, can be used instead of ultrafine 300, 400-mesh point to no buyang, but there are in the supporting this super fine wire is not a good business card printing and membership card production, resulting in the whole-tone, so use with four color separation business card printing and membership card production, decreased slightly in the optical Department, dot by LC, LM on magenta and supplemental lighting of a thick and are some of the use of laodelphax LB the light grey, LR on peach, LG 浅紫 light-green, LV, and so on secondary light-coloured, and this is the kind of color by the car and it came to technical method of extension, how to make sure the complementary color concentration and minus four dot color separation, is out on the relationship between the original and buyang is the most difficult technical staff must villagers'participation.

平部到洋间调的网不面表示不若印满版色菲薄无力，可以改用超粗300线、400线以上钩不面来弭补，但有见於这栽超粗网线并欠好制卡和会员卡制作，造不败整版色调不佳，所以改用以四色版制卡和会员卡制作，在平部稍降网不面百分比，由LC不深蓝、LM不深洋赤等来补平部之菲薄感有些搁置LB灰不深灰、LR不深桃、LG不深红、LV不深紫等二不主色不深色为之，这是栽由手工开色石版法蔓延来的技艺，如何拿捏补色浓度及增去原有四色版网不面百分比，是开不入来本来及补不出色版时技艺职员最不易也是务必的考量。

On a grating type gear integrated error measuring equipm ent, this technique employs the three-point method error separation technique fo r separation of the systematic error of the measuring chain of equipment spindle system including measuring worm error, grating transducer error, bearing rota ry error etc.

在一台光栅式齿轮整体误差测量仪上，它用三点法误差分离技术能分离开仪器轴系测量链的系统误差(包括测量蜗杆误差、光栅传感器误差、轴承回转误差等)和被测齿轮的全谐波误差。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。