查询词典 scan frequency

The issues of present seismic wavelet frequency caused by different concepts, such as apparent frequency, dominant frequency, peak frequency and centroid frequency, etc., which are defined by different methods, and understanding deviation, definition of seismic wavelet frequency for time and frequency domain are concluded and summarized. On this basis, three kinds of seismic wavelets in common use such as Ricker and Zinc wavelets as well as sine wavelet with exponential attenuation characteristics are analyzed and a conclude is achieved that apparent frequency and dominant frequency are consistent in essence, but peak frequency and centroid frequency as well as apparent frequency or dominant frequency are not completely consistent with different seismic wavelets. For actual seismic data, peak frequency can approximately be used as dominant frequency, but it is not suitable when seismic wavelet is known for it can give out any wrong knowledge and results.

针对目前地震子波频率由于定义方式出现的各种概念（视频率、主频、峰值频率、中心频率等）以及理解上出现的偏差等问题，首先从时间域定义和频率域定义2个方面进行了归纳和总结，并在此基础上对3种常用地震子波（Ricker子波，Zinc子波，正弦指数衰减子波）进行了分析和研究，得出视频率与主频概念一致，但不同地震子波的峰值频率、中心频率和视频率之间并不完全一致的结论；而对于实际地震资料，将峰值频率近似看作地震子波的主频是可以的，但在地震子波已知的情形下这样做是不恰当的，甚至可能会得出错误的结论和认识。

In view of these shortcomings, this frequency meter has made the radical innovation in the design, its merit is: Uses the core component is the advanced monolithic special-purpose frequency measurement component -- monolithic frequency meter, the integration rate is high, the volume is small, consumes the electricity province, function, has realized the frequency meter high integration and the microminiaturization; So long as the monolithic frequency meter adds on the crystal oscillator, the measuring range choice, the frequency demonstrated and so on the very few components then constitute DC to the 10MHz miniature basic frequency measurement electric circuit; But the biggest merit was this frequency meter has realized monolithic frequency meter, frequency sampling electric circuit and the monolithic microcomputer three between hardware and the software connection completely, caused the frequency measurement measuring range the choice, the frequency data survey, the sampling as well as the code frontier transformation and the data dump possible monolithic microcomputer software programming automatically to carry on, thus has realized the frequency measurement and the sampling work intellectualizes completely, causes this system already to be possible to constitute a miniature intelligence to measure rate the instrument core electric circuit independently, also might take in the large-scale automatic control or a test system intelligent subsystem.

针对这些缺点，本频率计在设计上作了根本的革新，其优点是：所用核心器件是先进的单片专用测频器件——单片频率计，集成度高，体积小，耗电省，功能强，实现了频率计的高度集成化和微型化；单片频率计只要加上晶振、量程选择、频率显示等很少量的器件即可构成一个DC至10MHz的微型基本测频电路；而最大的优点则是本频率计完全实现了单片频率计、频率采样与单片微机三者之间的硬件与软件接口，使得测频量程的选择、频率数据的测量、采样以及编码的边境转换和数据的转储均可能过单片微机的软件编程自动进行，从而实现了测频与采样工作的完全智能化，使得本系统既可独立构成一个微型智能测率仪器的核心电路，也可作为大型自动控制或测试系统中的一个智能子系统。

In view of these shortcomings this frequency meter has made the radical innovation in the design its merit is: Uses the core component is the advanced monolithic special-purpose frequency measurement component -- monolithic frequency meter the integration rate is high the volume is small consumes the electricity province function has realized the frequency meter high integration and the microminiaturization; So long as the monolithic frequency meter adds on the crystal oscillator the measuring range choice the frequency demonstrated and so on the very few components then constitute DC to the 10MHz miniature basic frequency measurement electric circuit; But the biggest merit was this frequency meter has realized monolithic frequency meter frequency sampling electric circuit and the monolithic microcomputer three between hardware and the software connection completely caused the frequency measurement measuring range the choice the frequency data survey the sampling as well as the code frontier transformation and the data dump possible monolithic microcomputer software programming automatically to carry on thus has realized the frequency measurement and the sampling work intellectualizes completely causes this system already to be possible to constitute a miniature intelligence to measure rate the instrument core electric circuit independently also might take in the large-scale automatic control or a test system intelligent subsystem.

摘要传统的测频仪器体积很大，耗能量大，主要靠手工操作，而最大的缺点是不可编程，其量程转换、数据测量、采样控制和处理等均不能通过程序指令来进行控制，无法作为一个微型智能子系统与某一大型自动控制或测试系统进行接口。针对这些缺点，本频率计再设计上作了根本的革新，其优点是：所用核心器件是先进的单片专用测频器件——单片频率计，集成度高，体积小，耗电省，功能强，实现了频率计的高度集成化和微型化；单片频率计只要加上晶振、量程选择、频率显示等很晌慰的器件即可构成一个DC至10MHz的微型基本测频电路；而最大的优点则是本频率计完全实现了单片频率计、频率采样与单片微机三者之间的硬件与软件接口，使得测频量程的选择、频率数据的测量、采样以及编码的边境转换和数据的转储均可能过单片微机的软件编程自动进行，从而实现了测频与采样工作的完全智能化，使得本系统既可独立构成一个微型智能测率仪器的核心电路，也可作为大型自动控制或测试系统中的一个智能子系统。关键词高度集成化，单片机，频率计，电路

Time is always used as the most important parameter in the current network security visualization techniques on port scan.This makes the slow scan, the dynamic or random scan, concealed scan and spoofed scan hard to detect, and the detection results of the related security anomalies such as DDoS, worms, Trojans etc are bad too. Therefore, a novel network security visualization method for slow scan, concealed scan etc is proposed in this paper.

目前基于端口扫描的网络安全可视化技术常常以时间作为最重要参数指标，往往只能检测那些较快速地扫描行为，对强动态性、强随机性和强隐蔽性的与端口有关的安全事件如DDoS、蠕虫病毒、木马等效果并不好。

Considering the specialty of pseudo-random vector, a partial scan algorithm for BIST, which unifying the structure analysis and testability analysis, is presented in this paper. Then, the fault simulation experiments on ISCAS89 benchmark circuits by this algorithm is made, and the results, which made by the full scan algorithm and the partial scan algorithm only based on the structure analysis, is compared. The conclusion is achieved: for pseudo-random vector, compared with the full scan circuit and the circuit geted by partial scan algorithm only based on the structure analysis, the circuit geted by our partial scan algorithm can greatly reduce the test time with very close or even greater faults coverage and less area than the full scan.

考虑到伪随机测试向量的特殊性，本文借鉴确定性测试向量生成的部分扫描算法，在内建自测试环境中，提出一种综合结构分析和可测性分析的部分扫描算法，PSBAST，并运用此算法对ISCAS89 benchmark电路进行计算，并对经计算后得到的部分扫描电路进行故障模拟，最后将模拟结果与全扫描电路和一种仅考虑结构因素的部分扫描算法得到的结果进行详细分析和比较，结果表明：对于伪随机测试向量，相对于全扫描电路和由仅考虑结构因素的部分扫描算法得到的电路，本文提出的部分扫描算法得到的电路，能够在不低于全扫描结构故障覆盖率前提下，大幅度减少测试时间，并能降低测试面积开销。

For frequency information fluid identification technology:the basic theory of fluid identification based on frequency information has been introduced,for inner and external factor affecting frequency,some steps have been proposed to attain reserved amplitude and frequency analysis data with high resolution,high S/N ratio;through the comparison of time-frequency analysis method, the high accuracy time-frequency analysis method has been selected to extract time-frequency attributes;the analysis method flow of common single frequency fluid identification has been proposed,according to the data of full frequency band,several anomaly zone modes of common single frequency attribute have segregated; incorporating converted wave and compression wave,fluid identification method based on PS wave combined time-frequency analysis has been proposed;the AVO property of various fluid type in frequency domain has been studied;the generalized fourier analysis method,Proni absorption filter has been introduced,and researched for anti-noise and for the seismic processing interpretation flow.The above technology have been applied to fluid identification of organic reef in WBT area in the east of Sichuan and fluid identification of clastic rock in GUANGAN area in the middle of Sichuan,the results show that the above methods are effective.

基于频率信息的流体识别技术方面：介绍了利用频率信息流体识别的基本理论，针对影响频率的内、外在因素，提出一些针对措施，以获得高分辨率、高信噪比的保幅、保频分析数据；通过时频分析方法的比较，选取高精度的时频分析方法提取时频属性；提出共单频属性进行流体识别的分析方法流程，结合全频带数据，分出几种共单频属性异常带模式；联合转换波资料和纵波资料，提出基于纵横波联合时频分析进行流体识别方法；研究了频率域内不同流体类型AVO现象；引进一种广义傅立叶分析方法：Proni吸收滤波，研究其抗噪性以及进行地震处理解释的流程；将这些技术应用川东北五百梯区块进行生物礁储层流体的识别和川中广安陆相碎屑岩的流体识别，取得较好的效果。

Material and Methods:From March,2008 to January,2009,250 patients(146 Males and 104 Females,ranged from 18 to 82 years old,mean age was 48 years old) enrolled in the First Affiliated Hospital of Kunming Medical College were performed dual energy scan(Group A,200 patients) and Neuro-DSA scan(Group B,50 patients) using DSCT.The patients were randomly divided into Group A and Group B.Regarding to the justification of scan protocol,100 patients in Group A were selected as sub-group to explore the scan protocol.The image quality Was analyzed both in four categories(4.0/60、4.5/60、4.0/70、4.5/70) of flow rate and total amount of contrast-enhanced material and in three categories(100—150HU、150—200HU、200-250HU) of CT value of left common carotid artery.The comparison of two scan approach was based on image quality,radiation does, postprocessing methods,time of scanning and subtraction and data storage amount.To validate the diagnostic capability of DE-CTA virtual unenhanced images,100 patients in Group A were undergoing head scan both in routine non-contrast program and DE-CTA virtual unenhanced program.Mean CT values,signal-to-noise ratio,image quality,sensitivity of lesion identification,and radiation does were applied to comparison.According to diagnostic results of dual energy of cerebral arterial angiography,62 patients out of 200 patients in Group A were confirmed with cerebral vessel lesions,the results were complied with DSA findings(the time between the two methods were within 1 week).

材料与方法收集2008年3月到2009年1月间在昆明医学院第一附属医院行DSCT CTA检查者250例(男性146例，女性104例，年龄范围18-82岁，平均48岁)，随机分为A、B两组，A组200例行双能量头颅CTA扫描；B组50例行Neuro-DSA扫描。A组前100例按对比剂不同流率和总量分为4组(4.0/60、4.5/60、4.0/70、4.5/70)对图像质量比较；按触发时左颈总动脉内平均CT位分3组(100—150HU、150—200HU、200-250HU)，比较图像质量的差异；对A、B两组血管图像质量、辐射剂量、后处理的方法、扫描和后处理时间及数据的容量进行比较分析；A组中前100例行常规与DE-CTA虚拟平扫的平均CT值、信号噪声比、图像质量、病灶显示情况、辐射剂量的比较分析；A组中行DSA检查62例(两种方法间隔时间均1周内)，比较两种检查方法诊断结果是否符合，并对其中24例动脉瘤行动脉瘤部位、数目、形态、瘤颈显示程度、瘤颈大小及瘤体长径和短径的比较研究。

Base Station type Software versionTypes of carrier frequency board adoptedTypes of combiner adoptedWhether had obtained the network license or notIndoor type or outdoor type Whether the master port is separated from the remote-port The maximum carrier frequency capacity of single cabinet The maximum supportable sector numbers of single cabinetWhether it is dual-carrier frequency board or notMust it be paired configuration if it's dual-carrier frequency board (namely, the type of single carrier frequency station could only configure the dual-carrier frequency on hardware) The maximum achievable configuration of a single station of the single cabinetReceiver sensitivity The maximum expand capacity of a single base station (the maximum number of TRX in configuration / the number of cabinets which is required)(fill in according with the three sectors) Top box transmitted power (given separately a grade one combine and a grade two combine) The maximum output power of amplifier (voice, a single logical carrier frequency) The maximum output power of amplifier (EGPRS, a single logical carrier frequency)Whether it has tower-interfaceWhether it has built-in lightning protectionWhether it support the ultra-long cover / whether it need for software support (give simple description that how hardware and software could achieve this) The supporting condition of EGSM (it should be supported including by the carrier frequency, combiner) Dual-band carrier wave (whether it supports the mixed use of 900 M/1800M in the same cabinet) The commonality of duplicate parts Whether it can built-in transmission unitThe single cabinet size (high × width × deep) Installation method Whether it can place against the wallThe basic frame full-configured weight and the supportable number of carrier frequencyThe expansion frame full-configured weight and the supportable number of carrier frequency

基站型号软件版本号采用载频板型号采用合路器型号是否已取得入网许可室内型or室外型是否是主远端分离单机柜最大载频容量单机柜最大支持的扇区数是否是双载频板如是双载频板，是否必须成对配置(即单载频站型只能硬件配置双载频)单机柜可达到的单站最大配置接收机灵敏度单基站最大扩展能力(最大配置TRX数/需机柜数)(按3扇区填写)机顶发射功率(分别给出一级合路与两级合路)功放最大输出功率功放最大输出功率(EGPRS，单个逻辑载频)有无塔放接口有无内置避雷装置是否支持超远覆盖/是否需要软件支持(简单描述软硬件如何实现)EGSM支持情况(包括载频、合路器均应支持)双频段载波（是否支持900M/1800M在同一机柜内混合使用）备件通用性是否可以内置传输单元单机柜尺寸安装方式可否靠墙放置基本架满配重量及支持载频数扩容架满配重量及支持载频数是否支持基本架与扩容架跨扇区满配功耗满配时重量供电方式机柜进出线方式合路器损耗合路能力：几合一单扇区最大支持几载频合路到一副天线/采用几个合路器单扇区载频达到需要增加一副天线时，是否支持两级合路换以不增加天线如两级合路插损为是否支持基带跳频和合成跳频每单个合路器在从低载频数向高载频数扩容时，是否还需要增加硬件可用性指标MTBFMTTR系统中断服务时间硬件是否支持EGPRS本次报价软件版本号开始支持EGPRS的软件版本号其他特点注： 1 应分别填写出来按照本次报价要求所采用的全部BTS型号和采用的合路器型号 2 列出本报价要求的全部室外型基站与高功放单元

The invention comprises the following steps: summating and counting the added playing times of the acoustic frequency song in the portable media device when playing any acoustic frequency song; updating and saving in the current playing acoustic frequency song list; displaying the first acoustic frequency song list and the second acoustic frequency song list for the users in the picture according to the summated and counted acoustic frequency song playing frequency and the updated and saved current playing acoustic frequency song list when the user requests to play the song and uses the quick search music function; displaying the acoustic frequency song list according to the high sequence of the user playing frequency.

本发明包括：在便携式多媒体设备中，当播放任意音频曲目时，对该音频曲目增加的播放次数进行累积计数，并在最近播放的音频曲目列表中进行更新存储，当使用者要求播放曲目而使用快速检索音乐功能时，便能参照累积计数的音频曲目播放频度和被更新存储的最近播放的音频曲目列表，在画面中显示可供使用者选择的第1音频曲目列表和第2音频曲目列表，按照使用者播放频度高的顺序以及最近播放的顺序显示音频曲目列表。

The invention discloses a multi-cell pilot frequency distribution method applied in an orthogonal frequency-division multiplexing system, which comprises the following steps: generating at least two different original frequency hopping sequences according to a predetermined pilot frequency domain; generating a combined frequency hopping sequence (having length greater than that of the original frequency hopping sequences) from at least two different original frequency hopping sequences; generating different pilot frequency structures satisfying collision threshold requirements based on the combined frequency hopping sequence; and distributing the generated pilot frequency structures to each cell.

本发明公开了一种多小区导频分配的方法，用于正交频分复用系统，按照预定的导频频域间隔生成至少两种不同的原始跳频序列；将至少两种不同的所述原始跳频序列生成组合跳频序列，所述组合跳频序列的长度大于所述原始跳频序列的长度；基于所述组合跳频序列生成满足碰撞门限要求的不同导频结构；将所述生成的导频结构分配给各小区。

According to our present broadcasting situation,the thesis proposes using new technology to update and reform the present HFC. It also suggests broadcasting using self-advantage and arranging EPON in order to win the supermarket.

论文从我国广电的现状出发，结合实际，积极倡导采用新技术更新、改造我国现有的HFC网络；倡导广电现阶段利用自身优势，部署EPON网络来赢取市场。

A new general kinetic equation was derived in which the effect of the removal of condensation water was taken into account completely, and was applied to the polyesterification kinetic study of AA/HPHP and AA/NPG. It was found that the reaction order of self-catalyzed polyesterification was not constant. For these polyesterifications, the reaction order was 2.5 at a low temperature, while 3.0 at a high temperature.

考虑缩合水的排除对反应体系的影响，用体积浓度单位推导出一个新的聚酯反应总包动力学方程，并应用到AA/HPHP和AA/NPG两个聚酯化反应的动力学研究中，研究发现，自催化聚酯反应的反应级数并不是固定值，对于AA/HPHP和AA/NPG两个聚酯化反应而言，低温时反应级数为2.5，高温时反应级数为3.0。