查询词典 rotor

Experimental synchronous rotor internal mixer and two kinds of 55L synchronous rotor internal mixer, consulted a number of published articles at home and abroad, then, for the first time, formed four kinds of physical model and the corresponding mathematical model which related to the mixed stock between the mixing chamber side and the top of the rotor wing, to the mixed stock between the two rotors and to the mixed stock at the various temperatures of the mixing chamber. And from the character of model, the author gave the relevant analytic solutions and finite element approximation arithmetic solutions during the experimental process of the synchronous rotor internal mixer.

因此，本文作者在XM—1.7实验用同步转子密炼机和两种50L同步转子密炼机上进行了大量的实验，并参阅国内外已发表的文献和资料，首次建立了同步转子密炼机混炼过程中，胶料在转子棱峰与密炼室壁之间、胶料在两同步转子之间和密炼室中混炼胶温度变化的四种物理模型及其相应的数学模型，并根据所建模型的特点，分别给出了相应的解析解或有限元数值解。

As the rotating magnetic field into which both the rotor cutting electricity conductor when a magnetic line of force, to achieve a rotating magnetic field from the force rotation for the corresponding rotor rotation, the rotor can achieve rotor lead screw for the corresponding movement.

由于旋转磁场对放入其中的通电导体既转子切割磁力线时具有力的作用，从实现了旋转磁场的转动迫使转子作相应的转动，所以转子才可以实现转子带动丝杠作相应的运动。

First the passivity of motor rotor flux subsystem is proved. Workless forces have no influence on the energy balance equation and have no effect on the asymptotic stability. Then it is discussed that the system can stably track the reference rotor flux without rotor flux observer. At last an adaptive PBC strategy is proposed with regard to the rotor resistance change. A clear and simple design for the speed control subsystem with inner current loops is presented.

证明了感应电机转子磁链子系统的无源性，找到系统能量耗散特性方程中的无功力，它不会影响系统的稳定性，得出无需转子磁链观测反馈即能稳定跟踪转子磁链的参考值，同时考虑电机转子电阻在运行中发生未知变化，设计自适应调节器使系统对转子电阻呈现鲁棒性，构建了带电流内环速度控制系统。

The technical characteristics of the invention is that: the rotor end face tooth profile contains four, five or six sections of tooth curves with the circular nature; when it has five sections, addendum circular arcs and dedendum circles are added to the addendum or the dedendum of the rotor; when it has six sections, both the addendum circular arcs and the dedendum circles are added to the addendum and the dedendum of the rotor at the same time, to form four different combination schemes; there are common tangents at the connection points of the two adjacent teeth forming curves, which has a smooth tooth-profile without cusp, a high-wearing feature, a long life of the rotor, a small leakage triangle, and a good sealing property.

本发明的技术特征是：转子端面齿型是包含四段、五段或六段圆弧性质的齿曲线；当为五段时，在转子的齿顶或齿根加上齿顶圆弧或齿根圆弧，当为六段时，在转子的齿顶和齿根同时加上齿顶圆弧和齿根圆弧，形成四种不同的齿型组合方案；相邻的两组成齿曲线的连接点处具有公切线，齿型光滑，没有尖点，耐磨性好，转子的使用寿命长，泄漏三角形小，密封性好。

Submersible motor is a vertical three-phase induction motor. It adopts lathy structure of subsection of stator and rotor: each subsection of stator combines with non-magnetic substance and each subsection of rotor combines with rotor bearing. There is full of appropriative lubricating oil between stator and rotor.

潜油电机是一种立式工作的三相异步电动机，它采用定转子分段的细长结构，各定子段之间轴向用非磁性材料连接，各转子段之间有扶正轴承，定转子之间充满专用润滑油。

Results indicate that radial distance of the bushing from the rotor center and the radius of the hemispherical bushing significantly affect wear rate,and minimzing both two values will result in lowest wear for micro-rotor systems in MEMS.However,it is noted that the bearing radius sets a lower limit on the hemispherical bushing radius since the bushings are located beyond the rotor inner radius.It is desirable to reduce their effects on friction and wear on micro-rotors by regulating the radius of the bushing and the radial distance of the bushing from the rotor center within permissive range of micro-fabrication.Severe wear exists with increasing applied load and rotating speed of the rotor.Stress distributions in the contact region are different from Hertz solutions due to the convergence stresses apearing on the uncontinuous curvature line and the contact pressures display symmetrical parabola in the contact region.

结果表明：在MEMS微转子系统中，微转子轴衬偏心距离和转子轴衬半径影响线磨损率，以两者减至最小为较理想，但须注意设计中轴承半径的限制，并使轴衬偏心距离大于轴承内半径；在转子加工制造许可的范围内，可以通过调整转子轴衬的半径和偏心距离来减少摩擦磨损对微电机的影响，随着转子所承受载荷和转子旋转速度的增加，其磨损严重；接触区的应力分布不同于经典Hertz解，这是由于应力集中出现在不连续的曲率线上，且接触区的接触压力呈现轴对称抛物线状分布。

First, the angular velocity function and maneuver load for certain maneuver flight (including hover, dive-hike and these two combined) are set up. The simulation results of the vibration of double-disk rotor system with cantilever supported on rigid bearings show that rotor would be apparently deformed under maneuver load. Second, the performance of oil force of SFD in maneuver flight is analyzed. The results show that in maneuver flight, the SFD with centering spring will become eccentric and its oil force will be time-related and offset-related. Then, SFDs are introduced into typical Jeffcott rotor system. The whole system will be statically displaced in maneuver flight and the nonsynchronous components of oil force appear in the response of rotor system.

首先，建立了水平盘旋、俯冲拉起及盘旋+俯冲拉起复合机动三种机动飞行条件下的机动角速度函数，并确定了对应机动飞行条件下的机动附加载荷(附加离心力和附加陀螺力矩)，分析了带刚支的双盘悬臂转子系统在机动飞行条件下的振动特性，发现发动机转子在机动飞行时会发生明显变形；随后，分析了非定心挤压油膜阻尼器的油膜力特性，机动飞行时，油膜轴颈在机动附加载荷的作用下偏离外环中心，使得带定心弹支的挤压油膜阻尼器也变成了非定心挤压油膜阻尼器，其非定心挤压油膜力是瞬态时变的，并且与SFD油膜轴颈偏移量和进动形态有关；然后，在经典的Jeffcott转子系统中引入带定心弹支的挤压油膜阻尼器，分析了机动飞行时非线性转子系统的振动特性，发现挤压油膜阻尼器油膜力的非协调特性也反映到转子系统的振动响应中；之后，对机动飞行条件下带挤压油膜阻尼器的双盘悬臂转子系统的振动特性进行了分析，并重点分析、总结了俯冲拉起机动飞行时，系统结构参数和工作状态参数(转速比、机动飞行半径、机动角速度等)对该系统振动特性的影响。

Under the premise of a rotor system satisfying the quasi steady-state condition, the influencing coefficient method based on the steady-state rotor balancing is extended to single-plane or multiple-plane gain-scheduling control of a rotor with slowly varying speed and all factors affecting the stability of a gain-scheduling control are analyzed. Numerical simulations verify that the gain scheduling control can effectively suppress imbalance-induced vibration of a rotor with slowly varying speed.

在转子系统满足准稳态条件前提下，延伸基于转子稳态平衡的影响系数法到慢变速转子单平面或多平面增益调度控制，分析了影响增益调度控制稳定性的诸因素，以数值模拟证实了增益调度控制能有效地抑制慢变速转子的不平衡振动。

ROTOR SYSTEM: Two-bladed main rotor with small two-blade servo-rotor above main rotor and two-blade tail rotor.

转子系统：双主旋翼叶片小二叶伺服转子和两个以上的主旋翼，尾旋翼叶片。

The rub-impact between rotor and stator often occurs because the rotor shaft stiffness decreases following the occurrence of the crack in the rotor shaft, and thus the coupling fault with rub-impact and crack is hackneyed fault type. Based on the nonlinear dynamical model of the cracked rotor-bearing system with rub-impact, the stability of the periodic motion and instability way were studied in unbalance-rotating speed plane and rotor/stator clearance- rotating speed plane and crack depth- rotating speed plane, and the main results were validated by the experiment.

转子轴承系统裂纹故障的出现会引起转子系统转静件之间碰摩故障的发生，因此裂纹碰摩耦合故障也是转子系统常见的故障类型，本文在裂纹碰摩耦合故障转子轴承系统的非线性动力学模型基础上，分析了系统在不平衡量-转速、碰摩间隙-转速、裂纹深度-转速等参数域内，周期运动的稳定性及其失稳规律，并用实验验证了主要理论结果。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。