查询词典 protective coating

Field experiment showed that coating agent with uniconazole (No2 uniconazole seed-coating agent) could significantly defend cucumber seedlings agaist damping-off, inhibit vertical growth and strengthen in thickness of young seedlings. It could blossom early, significantly increase fruit numbers per plant and yields of early stage and total yield. After coating cauliflower seeds by No2 uniconazole seed-coating agent, the uniconazole coating did not affect emergence rate, reduced damping-off disease incidence, increased stem diameter and fresh weight of seedling underground parts.

大田栽培试验发现：烯效唑包衣能显著防控黄瓜苗期猝倒病，抑制瓜苗纵向生长和促进幼苗加粗，使植株开花提早，包衣后黄瓜单株结瓜数提高，前期产量和总产量均显著提高；烯效唑包衣花椰菜使其出苗时间略有延长，但对出苗率无明显影响，包衣后的幼苗猝倒病发病率显著降低，叶色明显加深，幼苗茎粗和地下部鲜重显著增加，包衣的植株现蕾期提早，花球单重显著增加且表现出一定的增产效应，但试验的两品种间存在一定的差异。

When the molar fraction of SnO2 is 83%, the main component of the coating isO2 solid solution with rutile structure. When the molar fraction of SnO2 is 44%, the main components of coating are theO2 solid solution with rutile structure andO2 solid solution with fluorite structure. When the molar fraction of SnO2 is 17%, the main component of the coating isO2 solid solution with fluorite structure. Annealed at higher temperature than 450 ℃, CeO2 is found in the coating containing 83%Sn, and there is not SnO2 in the coating containing 83%Ce, which suggests that fluoriteO2 has higher thermal stability than rutileO2. When the molar fraction of SnO2 increases, the dispensability of the coatings is improved greatly.

结果表明：通过控制制备条件可获得具有纳米结构的钛阳极涂层；当Sn的摩尔分数为83%时，涂层主要为金红石相的O2固溶体；当Sn的摩尔分数为44%时，涂层中金红石相O2固溶体和萤石结构的O2固溶体共存；当Sn的摩尔分数为17%时，涂层由萤石结构的O2固溶体组成；高于450 ℃退火时，含83%Sn的涂层中出现CeO2相，而在含83%Ce的涂层中没有出现SnO2相，表明在相同的溶质浓度下，萤石结构的O2固溶体比锡基金红石相O2固溶体具有更好的热稳定性；而涂层中的SnO2具有明显改善涂层分散性的作用。

Functional coating: Flame-retardant coating, ultra-violet ray resistant coating,"Three-Prevention" finishing, anti-bacteria foul-proof coating, base coating, cotton cloth highly

功能性涂层：阻燃涂层，抗紫外线涂层、"三防"整理，抗菌防臭涂层，皮膜涂层，及棉布的高弹涂层、隐纹涂层等等。

Precision coating is a very important process in manufacturing of thin films. Among many coating techniques, slot coating may be the most promising in developing high precision coating process due to its versatility and controllability. Fundamentals of slot coating have been studied by many pioneer researchers. However, two topics: use of polymer additives and discrete operation remained relatively largely uninvestigated, especially in terms of their basic mechanisms. These two topics are studied in this thesis using theoretical analysis and experimental methods.

精密涂布技术是未来薄膜技术的重要发展方向，在诸多的涂布技术中，狭缝式涂布是用途广泛且有深厚发展潜力的一项，前人的研究阐明了许多狭缝式涂布的疑难问题，然而，随著精密涂布技术的发展，高分子添加剂与非连续操作逐渐地应用於狭缝式涂布之中，这两个研究课题目前并未发展出适当的理论来说明其机制，本研究以理论与实验的方法对这两个课题进行研究。

There was an obvious phenomenon of mechanical occlusion on the cold spray coating interface, and the rolled coating had the phenomenon of metallurgical bonding; The structure of cold-sprayed coating is dense. The poriness of the cold-sprayed coating gradually reduce as the coating's thickness increase.

结果 涂层界面形貌的不同反映出两种涂层的结合机理不尽相同，冷喷涂层界面出现明显的机械咬合现象，而轧制涂层以冶金结合为主；冷喷涂层组织致密，孔隙率随着喷涂厚度的增加逐渐降低；冷喷涂层的表面粗糙度高于轧制覆铜板，有必要对其进行一道轧制处理，改善涂层表面平整度。

The effect of nano-diamond powder on the forming speed, microhardness and wear-resistance of compound brush plating Ni-P coating, the wear-resistance of brush plating Ni-P coating, Ni-P nano-diamond composite coating and Ni-P micro-diamond composite coating was tested. The mechanism of improving wear-resistance by of composite coating was analyzed.

中文摘要：研究了纳米金刚石粉对复合电刷镀镀层形成速率、显微硬度和耐磨性的影响；测试了在不同的热处理温度、载荷及金刚石粉含量下复合刷镀层的耐磨性能；分析了复合镀层的磨损机理。

They are are widely used in metal anticorrosive and defending coating, steel structure coating, rolling material coating, steel cylinder coating, printing coating, sealant, wood paint, ink, gloss oil and glass paint, etc.

产品广泛应用在金属防腐防护涂料、钢结构涂料、卷材卷钢涂料、钢桶涂料、织物印花涂料、封闭剂、木器漆、油墨、上光油、玻璃漆等领域。

The method for making the solar endothermic coating by using the nickel or nickel alloy hollow sphere as the absorbent adopts simple equipment and simple and feasible process; the prepared solar endothermic coating is a metal-resin type composite coating; the absorbent is nickel or nickel alloy powder with a hollow structure; a filling agent is made of macromolecule resin; the thickness of the coating is controlled between 10 and 100 mu m; the color of the coating is gray-black or black.

本发明采用的设备简单，工艺简单易行，所制备的太阳能吸热涂层为金属-树脂型复合涂层，吸收剂为具有空心结构的镍或镍合金粉末，填充剂为高分子树脂，涂层厚度控制在10～100μm，涂层颜色呈灰黑色或黑色。

Through above numerical analysis of the TiN coating/substrate system, some typical rules about the fatigue failure are found:(1) the fatigue damage of a coating/substrate system appears first on the interface, then expands along the interface and to the substrate, and finally causes the coatings broken and spalled;(2) under the cyclic loadings of tangential sliding and radial extrusion, the equivalent plastic damage on the interface is mainly generated by the shear stress and the accumulated plastic contributed by the increments of shear stress. Thus the change of the shear stress is the main factor for the contact fatigue damages of coating/substrate system;(3) the frictional coefficient, external loading and coating thickness have some influence on the carrying capacity and contact fatigue life for a coating/substrate system.

通过对TiN涂层／基体系统的数值模拟分析，得到了涂层／基体系统疲劳失效的一些典型规律：(1)、涂层基体的初始损伤首先出现在交界面处，然后沿界面并向基体中扩展，最后导致涂层断裂而发生剥落失效；(2)、在切向滑动和径向挤压循环载荷作用下，交界面处的塑性损伤主要是由剪应力τ产生，塑性累积也是由于△τ的变化引起，说明循环过程中剪应力变化是影响涂层接触疲劳破坏的主要因素；(3)、材料摩擦系数、外界载荷大小以及涂层厚度都对涂层／基体系统的承载能力以及疲劳寿命都有一定影响。

Our products include pet cages in wire series with powder coating, chrome coating, zinc coating, and other plastic coating, pet cages with powder coating, pet cages in metal pipe series and other relevant products such as dog cages, bird cages, cat cages, rabbit cages and hamster cages.

产品有：铁线类的电镀、喷塑的宠物笼；铁管类的喷塑宠物笼、塑料类宠物笼及其相关产品，包括狗笼、鸟笼、猫笼、兔笼等系列品种。本公司坚持&信誉至上，质量第一，双赢合作&为宗旨，欢迎国内外厂家、商家、来料或来样加工、生产，务求共同发展。

Listen,point and check your answers.

听，指出并且检查你的答案。

Warming needle is one of effective treatment methods for knee arthralgia aggravated by cold,and it is simple,safety,so it should be developed in clinical acupuncture and moxibustion extensively.

但以本院科针灸门诊在2005年1月—2006年6月期间共收治膝痛患者100余例，经过临床的诊断后，其中施以温针治疗的48例，疗效显著，报道如下。1临床资料本组病例48