查询词典 powder process

Gelatinized corn starch was prepared by a co-rotating twin-screw extruder,and through drying and comminuting process. Thermoplastic starch was prepared with the gelatinized corn starch powder as raw material and glycerol and Polyvinyl Alcohol as plasticizing agents. Thermoplastic starch sheet was prepared with extruding process. Degree of gelatinization was tested by a polarizing microscope. Mechanical properties of prepared thermal plastic starch sheets were studied in relating to type and amount of the plasticizing agents.

利用双螺杆挤出机对玉米淀粉进行糊化处理，经干燥、粉碎后制得预糊化淀粉，以其为原料，添加甘油，PVA为增塑剂制备热塑性淀粉，经模压制备片材后，通过偏光显微镜分析了淀粉的糊化情况，研究了甘油含量和PVA含量变化对材料性能的影响。

In order to acquire the heating-cooling process of laser molten pool and the mutual effect of sintering layers in multi-layer powder sintering, factors such as heat conduction, heat radiation, heat convecting and changeable thermophysical property parameters were taken into account comprehensively, the 3D transient state FEM of the temperature field of multi-layer thin-wall metal parts formed by DMLS was established based on ANSYS. The APDL (ANSYS Parametric Design Language) was used to carry out thermal resource moving and the technique of birth/death for element was used to simulate the process of material addition.

为掌握多层粉末烧结过程中激光熔池的加热冷却规律以及各烧结层之间的相互影响，综合考虑热传导、热辐射和热对流以及材料的高度非线性，基于ANSYS平台建立了多层金属薄壁件的三维温度场有限元模型，利用APDIJ语言编程实现模拟中激光热源的移动，采用&单元生死&技术描述粉末材料动态增长过程。

The anisotropic bonded NdFeB magnets were prepared by die-upsetting process and the effect of surface residual magnetization of anisotropic bonded magnets which were demagnetized by alternating current demagnetization and heat demagnetization process on the quantity of magnetic powder attracted on the surface was investigated.

采用模压成型方法制备各向异性粘结NdFeB 磁体，并研究了其经交流退磁及热退磁后磁体的表面剩磁大小对磁粉吸附程度的影响。

Activities of wire mesh honeycombs for SCR process were investigated. Kinetics of SCR process on catalysts including powder, wire mesh honeycomb and ceramic honeycomb was studied.

对蜂窝状筛网催化剂进行了活性考察，同时与粉末催化剂、蜂窝状堇青石催化剂的活性加以对比，并进行了反应动力学行为的分析。

The rutile TiO2 powder photocatalyst was prepared by hydrolysis process, and it was coated with WO3 by dipping process using tetrabutyl titanate (C16H36O4Ti) as raw material. The catalysts were characterized by XRD, Raman spectra, TEM and diffuse reflectance UV-Vis spectra.

以钛酸丁酯为钛源，采用水解法制备金红石型TiO2粉体，用浸渍法将制备的TiO2粉体包覆不同浓度的WO3（记为WO3-TiO2），并采用X射线衍射、拉曼光谱、透射电镜和紫外－可见漫反射光谱等手段对所得的光催化剂进行了表征。

The rutile TiO2 powder photocatalyst was prepared by hydrolysis process, and it was coated with WO3 by dipping process using tetrabutyl titanate(C16H36O4Ti) as raw material. The catalysts were characterized by XRD, Raman spectra, TEM and diffuse reflectance UV-Vis spectra.

摘 要：以钛酸丁酯为钛源，采用水解法制备金红石型TiO2粉体，用浸渍法将制备的TiO2粉体包覆不同浓度的WO3(记为WO3-TiO2)，并采用X射线衍射、拉曼光谱、透射电镜和紫外可见漫反射光谱等手段对所得的光催化剂进行了表征。

By process testing, we discovered the optimal rigidity matching value of friction 30CrSiMoVA Steel with the powder metallurgy material, and put forward an new heat treatment process.

通过工艺试验，找到了30CrSiMoVA钢与某粉末冶金材料相互磨擦时的最佳匹配硬度值，提出了一种热处理新工艺。

Pingyang powderfive licenses do the entire production process (including×, steaming powder) with all mountain spring water is pure rice products, the entire production process does not add any substance, not pollute the environment, welcomed the guests time to come to my factory light Participation .

五十丈牌平阳粉干整个生产过程用都山泉水，是纯大米制品，整个生产过程不添加任何物质，不污染环境，有空欢迎客人来我厂参光。

The mainly conclusions in our research are as flowing: tungsten trioxide powders with 100 nm primary particle are obtained by spray drying,calcination and wet milling process, and an average size of quadric particle composed of agglomerated particles is 0.64 μm; tungtsen powders with 39 nm grain size and 60 -100 nm primary particle are produced directly from previous tungsten trioxide using one step reduction in hydrogen at 700℃, and an average size of quadric particle of tungsten powder is 2.91 μm; tungsten trioxide and copper tungstate compound powders with 100 nm - 200 nm primary particle are produced using ammonia metatungsten and copper nitrate as raw materials by spray drying,calcination and wet milling process;the compound powders are transformed completely into tungsten and copper compound powders by reduction in hydrogen at 700℃,in which tungsten grain size is 59 nm and copper grain size is 51 nm; primary particle size of compound powders is 80 - 120 nm,and an average size of agglomerated quadric particle is 1.86 μm; tungsten nitride powders with 35 nm grain size are prepared from tungsten trioxide powders by nitrogen treatment thoroughly in pure ammonia at 650℃, and an average size of agglomerated quadric particle is 0.64 μm in normal temperature.

研究结果表明：采用喷雾干燥—焙烧—球磨工艺可以制备出粒度约为100nm的WO_3粉体，它们在团聚后形成的二次颗粒平均粒度为0.64μm；采用一步直接氢还原方法可在700℃下从上述WO_3粉体制备出晶粒尺寸为39nm的、一次颗粒粒度为60-100nm的W粉体，其二次颗粒的平均粒度为2.91μm；以偏钨酸铵、硝酸铜为原料，采用喷雾干燥—焙烧—球磨工艺可制备出一次粒度为100-200nm的WO_3和CuWO_4混合粉体；采用氢还原工艺可在700℃下将这种粉体完全转变为W、Cu复合粉体，其中W的平均晶粒粒尺寸为59nm，Cu的平均晶粒尺寸为51nm；复合粉体的一次颗粒尺寸为80-120nm，在常温下团聚后形成的二次平均粒度为1.86μm；采用纯氨氮化工艺可以在650℃下由WO_3粉体制得WN，其晶粒尺度为35nm，在常温下团聚后的二次平均粒度为6.4μm。

This paper discusses the influence of different calcining process of the APT is roasted to produce the yellow tungsten oxide on the quality of tungsten carbide powder, investigates the cause from particle size uniformity and the quantity of agglomerated particle s and improves the calcining process.

从粒度均匀性和聚集团粒量讨论了APT煅烧成WO3时的煅烧工艺对WC质量的影响，分析了引起WC粒度均匀性和聚集团粒的原因，并提出了较佳煅烧工艺。

They weren't aggressive, but I yelled and threw a rock in their direction to get them off the trail and away from me, just in case.

他们没有侵略性，但我大喊，并在他们的方向扔石头让他们过的线索，远离我，以防万一。

In slot 2 in your bag put wrapping paper, quantity does not matter in this case.

在你的书包里槽2把包装纸、数量无关紧要。