查询词典 pipe

The equivalent stress nephograms, the variation rule of pipe displacement and stress on the bellow pipe under expansion were obtained. It was found that the stress and strain of the pipe were symmetrically distributed over the geometric shape of the pipe,the equivalent stresses and equivalent strains at different points of the pipe varied with the curvature radius.

模拟了井眼中波纹管的膨胀变形，得到了波纹管施工加压膨胀和井壁接触过程中的等效应力分布云图、波纹管的位移、应力变化规律，以及波纹管膨胀后和井壁的接触状况。

The experimental and analytical results show that the axial rigidity of the corrugated pipe is 23.0 percent of the bare pipe with the same thickness and diameter,and the thermal compensation performance of the former is 2.27 times the latter's under equal-stress condition.By using corrugated pipe bundle instead of the bare pipe bundle with the same stiffness as its tube sheet,the axial thermal compensation can be increased by 40.4 percent,and the corresponding pulling-out force is 53.2 percent of that of the bare pipe bundle.

研究结果表明，波节换热管单管的刚度为相应光管的23.4%；在最大应力相同的条件下，波节换热管的轴向热补偿量为相应光管的2.27倍；在光管管束与壳体等刚度条件下，用波节管管束代替光管管束，轴向热补偿量可提高40.4%，相应的拉脱力为光管管束的53.2%。

In general, the working pressure of steam is not more than 0.8 Mpa and the temperature of air will be below 150℃. The wing radiator consists of three rows of paratactic screw wing pipe mainly. The paratactic screw wing pipe is made through winding 05*10mm of steel belt onto 18mm steel pipe and then zinc hot galvanized. It can also be made with full stainless steel pipe and belt. Model SRL radiator is made of steel pipe and aluminum belt through rolling. Its radiation area in unit length is more than Model SRZ.

翅片式散热器主要由空气流向间的三排并列螺旋翅片管束组成，SRZ型散热翅片管束的加工工艺是反0.5*10毫米的钢带用机械绕片方法，绕在18毫米无缝钢管上，然后进行热镀锌，也可用不锈钢管及不锈钢带制成全不锈钢散热器，SRL型散热器则是用钢管和铝带轧制的翅片散热器，其单位长度的散热面积比SRZ型的更大。

Seamless steel pipe unit: The steel pipe straightening machine, the puncher, the company roll over the unit, the company tube rolling train, two roller cold tube rolling trains, the cold-drawing machine, three roller tube unit, five roller cold tube rolling trains, the cyclical tube rolling train, the automatic tube rolling train, the top pipe unit, the steel pipe extrusion unit, the tensity reduce processing process units and so on the diameter machine and so on each kind of steel pipe finishing equipment and so on...

无缝钢管机组：钢管矫直机、穿孔机、连轧机组、连轧管机组、两辊冷轧管机组、冷拔机、三辊管机组、五辊冷轧管机组、周期轧管机组、自动轧管机组、顶管机组、钢管挤压机组、张力减径机等加工工艺设备等各类钢管精整设备等。。

Production of intellectual property rights have an independent national patent products - Bergen plates lined with plastic pipe embedded tendons, Bergen licensing stainless steel double-layer steel-lined metal tube, Bergen tendons embedded double-sided plates lined with plastic pipe, condensation-type lined with plastic pipe, steel mesh skeleton reinforced plastic composite pipe, high pressure bi-metallic tubes, thin-walled stainless steel pipes, galvanized pipes are an alternative to traditional ideals of environmental protection pipe.

公司生产拥有独立知识产权的国家专利产品--贝根牌内筋嵌入式衬塑钢管、贝根牌钢衬不锈钢管双层金属管、贝根牌内筋嵌入式双面衬塑钢管、缩合式衬塑钢管、钢丝网骨架增强塑料复合管、高压双金属管、薄壁不锈钢管，是替代传统镀锌管的理想环保管材。

Is one: the petrochemical, chemical, metallurgical, mechanical, electrical, pharmaceutical, light industry and the nuclear industry and other professional services industries, the production of material specifications, heat-resistant steel, resistance Steel mill heat-resistant alloy steel, rare earth wear-resistant steel, high-pressure high-temperature nickel chromium alloy steel: Steel Casting products, high temperatures centrifugal cast pipe casting, centrifugal cast pipe (casting thickness: 5 mm ---- 60mm, outside Drive: 50 mm ---- 1600mm, single-tube products such as super-6 m diameter size of the cast pipe products) tube, cracking furnace tube, and into the furnace, the furnace tube radiation, radiation control, the loser of the ash, the reaction of various Furnace roll, roll bottom, the furnace roll, sank roll, roll stability, and various types of precision casting fixture, heat-resistant steel castings, and Steel Plant for Hot Piercing Plug casting, casting industrial furnace, heat treatment furnace industrial castings , Heat-resistant castings, wear-resistant steel castings, various types of chemical process pumps, plastic alloy centrifugal pump fluoride, fluoride alloy pump, stainless steel pumps, valves, pipe, steel-lined composite of various pieces, all kinds of PTFE Plastic pipe, fin tube heat exchanger, paper, chemicals, light industrial and textile enterprises such as air-conditioning GL Ⅱ type, U-radiators, welding a variety of stainless steel, alloy steel, carbon steel, high-frequency finned tube , Studded tube, sawtooth-shaped fin, and other products of the manufacturing enterprises.

靖江市舒尔机械制造有限公司是一家为：石化、化工、冶金、机械、电力、制药、轻工和核工业等行业服务的专业公司，生产各种材质规格的，耐热钢、耐磨钢耐热合金钢、稀土耐磨合金钢、高温承压高镍铬合金钢：特钢铸造制品、耐高温离心铸管铸件，离心铸管（铸造壁厚：5mm----60mm、外径：50mm----1600mm，单管制品长6m等超大径的铸管制品尺寸）炉管、裂解炉管、转化炉管、辐射炉管、辐射管、输灰管、反应管、各种炉辊、炉底辊、炉内辊、沉没辊、稳定辊、及各类精密铸造工装夹具，耐热钢铸件，钢管厂用热轧穿孔顶头铸件、工业炉用铸件，热处理工业炉用铸件，耐热铸件，耐磨钢铸件，各类化工流程泵，氟塑料合金离心泵，氟合金泵，不锈钢泵、阀门、管件、各种钢衬复合管件，各类聚四氟乙烯塑料管件，翅片管换热器、造纸、化工、轻纺等企业的空调GLⅡ型，U型散热器、焊接各种规格的不锈钢、合金钢、碳钢等，高频翅片管、钉头管、锯齿形翅片管等产品的生产企业。

The results show that the porous pipe quantity, head loss and hydraulic deviation rate of the porous pipe would increase while water head in entrance, pipe length and porous pipe permeability increasing. The head loss mainly concentrated on the top half of the porous pipe.

结果表明，随着进水口压力、管长和微孔渗灌管透水性能的增加，微孔渗灌管水流量、沿程的水头损失和水力偏差率增大，且水头损失主要发生在微孔渗灌管靠近进水口的前半段。

Installation technology and application of the long-distance grp sand pipe;2. drainage pipe and field test of GRP sand pipe construction technology, we draw the conclusion that GRP pipe is applicable for drainage pipe of port engineering.

通过对玻璃钢夹砂管与钢筋混凝土排水管的综合性能比较及对玻璃钢夹砂管施工工艺的现场测试，得出&玻璃钢夹砂管完全适用于港口工程的排水管道&的结论。

The device includes a drill spigot inserting into the marebase sand layer through the upper cover soil layer, there sets air inlet, sand discharging pipe and vibration connecting pipe in the drill spigot; there sets a sand absorption head on the bottom of the air inlet and sand discharging pipe; the bottom of the vibration connecting pipe connects with the vibration head; the sand absorption head is made up of a centre cavity, ring cavity and sand absorption pipe.

该装置包括一穿透上部覆盖土层插入到海底深埋砂土层的钻孔套管，在钻孔套管内，设有进气管、排砂管和振动连接管；进气管和排砂管的下端连接一个吸砂头；振动连接管的下端连接振动头；吸砂头由一中心腔室、环状腔体和吸砂管构成。

This article introduces joint type of copper-aluminum pipe,including straight pipe butted joint,flared pipe insert joint,reducing pipe insert joint and reducing pipe lap joint,and the welding technologies in domestic and abroad,including friction welding,energy storage welding,flash welding,resistance welding,braze welding,cold butt welding and ultrasonic welding.

介绍了铜铝管的接头形式，主要包括：直管对接、扩口管插接、缩口管插接和缩口管搭接；以及国内外的焊接技术，主要包括：摩擦焊、储能焊、闪光焊、电阻焊、钎焊、冷压焊及超声波钎焊等。

Neither the killing of Mr Zarqawi nor any breakthrough on the political front will stop the insurgency and the fratricidal murders in their tracks.

在对危险的南部地区访问时，他斥责什叶派民兵领导人对中央集权的挑衅行为。

In fact,I've got him on the satellite mobile right now.

实际上 我们已接通卫星可视电话了