查询词典 pipe-rack

To ensure accuracy of measurement, the CSM-91 should be located at least five pipe diameters down stream from any fitting and at least ten pipe diameters downstream from a pump.

为了保证测量的准确性，系列CSM-91应该放置在距离任何连接件下游至少五倍管道直径长度的地方，和泵下游至少十倍管道直径长度的地方。

Vessel is isolated from air, is filled with running cooling water, and at one side it communicates with pump which is connected with pipeline, and at other side it communicates with outlet pipe 6 having its end located below pump which ensures running of cooling water as through syphon from pump to outlet pipe and into surrounding water basin without consuming any outside energy.

船只是孤立的，从空气，充满运行的冷却水，并在一方，它沟通与泵这是与管道，并在其他方面，它沟通与出水管6月底，其位于下面的泵，确保运行的冷却水作为通过虹吸从泵出水管和到周围水流域没有消费任何外来能源。

The three-dimensional finite element method is applied to analyse stress for tangential bonded structure of pressure vessel and pipe, and the stress with orthogonal bonded structure of pressure vessel and pipe is compared.

采用三维有限元方法对压力容器与接管切向连接部位进行了应力分析，获得了该部位的应力分布信息，并与正交接管连接结构形式的应力分布进行了比较。

Fourth, increase the export tax rebate on the hot roll, plate, strip, coated plate, steel, pipe, and some such as seamless pipe and steel wire rod and bar exports play a positive role.

四是出口退税上调对热卷、中板、带钢、涂镀板、型钢、焊管、部分无缝管及棒线材等钢材产品出口起到一定积极作用。

Through test and analysis, it is believed that the main cause of failure of the short inlet pipe of main platen header is low smelting purity and high impurity content of steel, and original cracks formed by concentrated impurity along the pipe longitudinally during rolling, which leads to tear-off.

通过试验，分析部件失效原因为：钢材冶炼纯净度低致使夹杂物超标，在随后的轧制过程中形成沿管子纵向分布的密集夹杂物构成的原始裂纹，从而导致开裂。

Another major pipe of the "four upper pipes" is Pin Xiao, which is higher than the "holed pipe" by a minor tierce.

以品箫为主者称"品管"，以品箫代替洞箫，比"洞管"高一个小三度音。

T-P-001 series plastics pipe material production line is mainly used in producing diameter and various wall thickness plastics PVC pipe materials for water-supply and drainage of industry and agriculture;water-supply and drainage of buildings,wire laying and xxxxx machine unit is composed of cone double-screw-stem extruder,vacuum shaping table,tractor,cuter,turn-up frame and others.

茶多酚- 001系列塑料管材生产线主要用于生产直径和各种壁厚塑料聚氯乙烯管材用于供水和排水系统的工业和农业；水厂供水和排水的建筑物，电线铺设xxxxx机组组成锥形双螺杆挤出机干，真空成型表，拖拉机， cuter ，把行动框架等。

Join, must both hands hold pipes and pipe fittings tight , keep enough cooling time, cool back hand can unclamp to certain extent , continue and install the next pipe.

连接完毕，必须双手紧握管材和管件，保持足够的冷却时间，冷却到一定程度后手方可松开，继续安装下一段管材。

Studied the solid particles cyclone separation under structural parameters and operating parameters of different hydrocyclone, the results showed that major factor influence split ratio is in the ratio of entrance to exit pressure of hydrocyclone. Exit pressure has a certain influence on the split ratio, the various of the diameter and cone angle of hydrocyclone (in the ratio of entrance to exit pressure is constant) have no influence on split ratio; With diameter and cone angle increase, the separation granularity gradually increasing and recovery ratio decreasing; With entrance pressure increase, the separation granularity of hydrocyclone decrease, the split ratio of underset will increase slowly; With the diameter of overflow pipe increase, the separation granularity of hydrocyclone increasing and recovery ratio decreasing; With the diameter of underset pipe increasing, the separation granularity of hydrocyclone decreasing and recovery ratio increasing.

在不同的水力旋流器结构参数和操作参数下，对固体颗粒的旋流分离进行了分析研究，结果表明：旋流器的排出口比是影响分流比的主要因素，进口压力对分流比有一定影响，水力旋流器的直径变化和锥段角度变化对分流比基本上没有影响；随着直径、锥段角度的增大，分离粒度逐渐增大，回收率降低；随着入口压力增大，水力旋流器的分离粒度变小，底流的分流比会缓慢增加；随着溢流管管径的增加，分离粒度增大，分流比明显减小，回收率降低；随着底流管直径的增加，分离粒度减小，分级效果明显下降，回收率会增加。

Obvious, with the pipe diameter increases, the use of polyethylene pipe has a very uneconomical.

明显地与管径的增加，对聚乙烯管道的使用有一个非常不经济的。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。