查询词典 phase position

Maximum model values are found for the channel matrix Hi of each user and for each column vector of the matrix, position information of the matrix is transmitted to a transmitting terminal, the transmitting terminal reconstructs the amplitude of each element of the column vector after receiving the position information, and phase position is quantized, wherein, after reconstruction, the amplitude of the element with the maximum model value is larger than that of other elements of the column vector, and a quantized angle of the element with the maximum model value is smaller than that of the other elements of the column vector; c.

对每个用户的信道矩阵Hi，对该矩阵的每个列向量，找出其最大模值，将其位置信息发送给发射端，发射端收到后对该列向量各元素的幅度进行重构，相位进行量化，其中最大模值的元素重构后其幅度大于该列向量其余元素的幅度，其量化角度小于该列向量其余元素的量化角度；c。

Phase velocity error caused by position error of microtremor observation array is computed under different conditions such as two different dispersive phase velocity models of Rayleigh wave, three kinds of radius, 19 kinds of observation position mode and 6 types of position error.

为研究地脉动观测台阵中观测点之间的定位误差带来的影响，计算了在两种瑞利波频散模型、3种不同的圆周半径以及19种观测位置等多种情况下由6种定位误差引起的瑞利波相速度相对误差，结果表明：由于圆周上观测点数目有限，在不存在定位误差时，相速度误差也是存在的，随观测点位置的不同，相速度相对误差存在差异，其最大值约为最小值的3倍。

In order to meet the demand of precise measurement and applications, the principle of phase retardation with oblique incident angle is expounded, based on the total-reflection phase transformation theory of the phase retardation. By means of Fresnel rhomb, the variation law of the phase retardation for rhomb-type retarder with the incident angle is analyzed. The result indicates that incident angle has obvious influence over the phase retardation.The phase retardation is sensitive to the incident angle, and also has close correlation to incident position of the incident ray, which is asymmetrical to the incident position of the incident ray.

为满足精确应用和测量的需求，从相位延迟的全反射相变理论出发，阐述了斜入射相位延迟原理，以菲涅耳菱体为例，分析了菱体型相位延迟器相位延迟随其入射角变化的规律性，结果表明：当光线非严格准直时，光的入射角对相位延迟量有明显的影响，延迟量不但对入射角变化敏感，而且还与入射光线的入射方位密切相关，呈不对称形式。

That is, the motor winding capacitance in series with the Deputy, due to the role of the capacitor, so that Kim winding current phase ahead of the main winding current in phase 90 °, in accordance with the basic theory of motor learning: When the space two winding axis position is 90 °, and the flow of two windings of the current phase and poor 90 °, its synthesis must be for the rotating magnetic field, magnetic field, so that motor up and running.

这种电动机就是将电容与副绕组串联，由于电容器的作用，使副相绕组中电流的相位超前于主绕组中电流的相位90°，按照电机学的基本理论：当空间两绕组轴线位置为90°，且流入两绕组中的电流相位又差90°时，其合成磁场必为旋转磁场，从而使电机启动和运转。

125E The final phase in a bull move is an accelerated runaway near the topE In this phase, the market always makes you believe that you have underestimated the potential bull marketE The temptation to continue pyramiding your position is strong as profits have now swelled to the point that you believe your account can stand any setbackE It is imperative at this juncture to take profits on your pyramids and reduce the position back to base levelsE The base position is then liquidated when it becomes apparent that the move has endedE

一个牛市运动的最后阶段是一场接近顶部的加速赛跑。在这一阶段，市场总是让你相信你低估了潜在的牛市。随著盈利膨胀到让你相信你的账户可以对付任何挫折，继续堆砌你的头寸金字塔的诱惑强大。在这关键的时候，要紧的是从你的金字塔上拿走你的盈利，把你的头寸减少到基本水平。随后，当这一运动变得显然结束了时，将这基本头寸也平仓。

The results show that the porosity of the membrane prepared by ScCO_2 induced phase separation is higher than that prepared by conventional method;the membrane structures are significantly influenced by the process parameters;compared with the conventional immersion precipitation phase inversion,ScCO_2 induced phase separation process can effectively avoid the formation of macrovoids at suitable operating conditions;during depressurization process,the great differences in the effect of depressurization time on membranes structure for various polymer materials result from that the speed of CO_2 gaseous nuclei escaping from membrane substrate can not keep the pace with the outer depressurization rate.(2) The tendency that the interaction parameters affect the binodal curve position is illustrated by changing the interaction parameters in reasonable ranges.

研究结果表明：与传统方法相比，采用ScCO_2诱导相转化法可获得更高的膜孔隙率；通过改变操作参数可对膜的结构进行调控，且操作参数对膜结构的影响与铸膜体系的自身性质也紧密相关；在适宜的操作条件下，ScCO_2诱导相转化法能有效避免采用传统的浸入沉淀相转化法制膜时易出现的大空腔结构；泄压过程中CO_2气核从聚合物膜基体中逃逸的速度能否与膜基体外部的泄压速度保持同步，是泄压时间对不同材质膜结构影响截然不同的根源所在。

At the meantime time, through observing the fracture appearance of the silicon phase reinforced aluminum matrix composites, it was found that some equiaxial dimples exist at the position of the fine regular"primary silicon phase"but the tear appearance can be found at the position of eutectic silicon phase.

高温DSC测试发现：半固态Al-30wt％Si合金和液态纯铝流变复合的硅相增强的铝基复合材料在加热到880℃一900℃时有一明显的吸热峰，证明了流变混熔复合工艺制备的该材料中有&初生硅相&的存在。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

Stage I of both male and female stone flounder appears only once in all its life, and the germ cells are comprised by spermatogonia or oogonia. The gonad from Mar to Aug keeps at stage II. The gonad index of testis at this stage is 0.037%, and the amount of spermatogonia is increased quickly. There is some linear germ plasm in the cytoplasm of spermatogina. In ovary at this stage it is mostly composed by oocyte of phase 2 which the character is the appearance of yolk nucleus, and no zona radiate in membrane. The mean GI of ovary is 1.95%. From Sep to Oct gonad is at stage III which testis is composed by lots of spermatogina and few spermatocytes, and the mean GI of testis at this stage is 0.086%. In ovary the ooctyes at phase 3 are in dominate position, the yolk nucleus disappear. And the GI of this stage is 3.35%. Both testis and ovary are at stage IV in Nov. hi testis the germ cells are in spermiogenesis, and the mean GI is 0.93%. hi ovary the oocytes are mostly at phase 4, which are filled in the cytoplasm with vitellin granule, and the zona radiate in membrane begins to formation. Nucleus moves to one side of the oocyte gradually. The mean GI of ovary at this stage is 9.37%.

在每年的3月-8月期间性腺处于Ⅱ期，此期精巢中精原细胞明显增多，胞质局部可见有线状的生殖质存在，平均成熟系数为0.037％；卵巢中以2时相卵母细胞为主，可见细胞质中出现强嗜碱性的卵黄核，细胞外由一层滤泡细胞包围，但尚无放射带，平均成熟系数为1.95％。9月-10月期间性腺处于Ⅲ期，此期精巢中仍有大量精原细胞，同时可见部分精母细胞，平均成熟系数为0.086％；卵巢中以3时石鲜孟加限加$玩印面n洲匆s性腺发生、分化及发育的周年变化相卵母细胞为主，细胞质中的卵黄核己消失，平均成熟系数为3.35%。11月性腺处于IV期，此期精巢内精细胞正处于不同的形成过程中，平均成熟系数为0.93%；卵巢中以4时相卵母细胞为主，胞质中充满染成桔红色的卵黄颗粒。

The results show that the frequency and phase position of frequency converter output power are out of phase with that of supply power, which is the main reason leading to metering system breakdown.

分析结果认为：变频器输出电源的频率和相位与供电电源频率和相位不同步是造成计量系统产生故障的主要原因。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。