查询词典 people power

As power market reformation carries on, power grid is in difficult status at the aspects of modulating peak effectively, operating safely and stably and supplying power reliably. Pumped storage power station has an important effect on safe, stable and economical operation of power grid. Research on benefit's comprehensive evaluation and operation mode of pumped storage power station is the avant-courier and difficulty in the domain of technology economy and management, which has important theory research value and practical significance.

随着我国电力市场改革，电网的调峰、安全稳定运行和可靠供电面临更为严峻的形势，抽水蓄能电站对电网安全、稳定和经济运行发挥着重要的作用，对抽水蓄能电站的效益综合评价和运营模式进行研究是目前国际上技术经济及管理研究的前沿问题之一，也是难点问题之一，具有重要的理论研究价值和实际意义。

As the track space increasing, the holding power which flexible holding parts act on sugarcane is dropping off. As the canvas layers and length of flexible holding part increasing, the track space is also increased when flexible holding parts act on sugarcane same holding power. As the length of flexible holding part increasing, the rate of slope of holding power following the track space to change would be decreased, so holding power would vary slowly. The holding power has a better linear relationship with the track space. Holding sugarcane stalk on knot or not on knot, sugarcane stalk having leaves or without leaves, the holding power would have not significant difference. Considering the structure of device and stress of sugarcane, 4-layers canvas conveyer belt was used as flexible holding part, while its length is 120mm, 160mm, or 200mm, the corresponding maximum track space is 135mm, 183mm, or 235mm. Experimental investigation of sugarcane windrowing was done on the arc-track-type flexible holding and conveying test mechanism.

随着轨道间距的增大，柔性夹持元件施加给甘蔗的夹持力逐渐减少；施加给甘蔗相同的夹持力，随着柔性夹持元件帆布帘层数和长度的增加，对应的轨道间距增加；随着柔性夹持元件长度的增大，柔性夹持元件施加给甘蔗的夹持力随轨道间距变化的斜率减小，夹持力大小的变化越缓慢；柔性夹持元件提供的夹持力与轨道间距均呈线性关系；柔性夹持元件夹在甘蔗节上还是不夹在节上，甘蔗有叶还是无叶，其施加给甘蔗的夹持力无显著差异；从夹持输送装置结构以及甘蔗的受力情况来考虑，选择4层帆布帘输送带作为柔性夹持元件更能平稳、柔和地夹持输送甘蔗，4层帆布帘120mm、160mm、200mm长的柔性夹持元件夹持甘蔗所需最大轨道间距为135mm 、183mm、235mm。

Transmit Softclipping Time Constant Receiving Input Sidetone Network Input Line Current Regulation Stop Value Microphone Input Microphone Input Transmit Gain Adjustment Transmit and Receive Part Power Supply Ground Line Current Source Power Supply Voltage Stabilizer Positive Line Unregulated Microcontroller Power Supply Receive Gain Adjustment Negative Earphone Output Positive Earphone Output Ringer Buzzer Output Ring Power Supply Reset Power On Ring Indicator Oscillator Input Mask, Ring Melody Input Data Input Data Clock Input Microcontroller Stabilized Power Supply Reference Voltage (VCC/2) DTMF Filter

1第1页，本页显示记录1-8，共8条记录分1页显示发送Softclipping时间常数接收输入侧音网络输入线电流调节停止价值麦克风输入麦克风输入发射增益调整发送和接收部分电源地线电流源电源稳压器的正电源线无管制的单片机接收增益调整负耳机输出耳机输出正林格蜂鸣器输出电源供应环环指标振荡器输入掩码电复位，环旋律输入数据输入数据时钟输入单片机的稳定电源参考电压（Vcc / 2）双音多频滤波器

The company has leading products: 1 W, 10W, 40W broadband microwave power amplifiers ,2-18 GHz microwave broadband hybrid integrated amplifier, 6-18GHz microwave broadband hybrid integrated amplifier, broadband low-noise amplifier, millimeter-wave power amplifiers, high-speed high-power microwave switch , Multi-channel switch filters, multi-channel receiver components, microwave, millimeter wave components RT ,1-18 GHz broadband limiter, broadband, such as ultra-wideband microwave antennas, of which 1 W has established mass production of microwave power amplifiers, 40 W microwave power Amplifiers ,2-18 GHz broadband hybrid integrated microwave power amplifiers, and other domestic fill the gaps, for the military plant, provided by the various military microwave devices and micro-electronic devices, for the modernization of national defense have made contributions to the building, the company also created a good Economic and social benefits.

公司的主导产品已有：1W、10W、40W宽带微波功率放大器、2-18GHz微波宽带混合集成放大器、 6-18GHz微波宽带混合集成放大器、宽带低噪声放大器、毫米波功率放大器、高速大功率微波开关、多通道开关滤波器、多通道接收组件、微波、毫米波R-T组件、1-18GHz宽带限幅器、宽带、超宽带微波天线等，其中1W微波功率放大器已定型批量生产，40W微波功率放大器、2-18GHz宽带混合集成微波功率放大器等填补了国内空白，为军工厂、所提供了各种军用微波器件和微电子器件，为国防现代化建设做出了贡献，也为公司创造了良好的经济效益和社会效益。

Is located in the city of Yuanping Dayun Story Road (opposite the Government Solutions Village), is the original ping City Power Switch Power Plant in 2006 restructuring the new company set up under the power of Xinzhou Branch Nengyuan Electric Power Construction Co., Ltd., one of the recipients of the provincial Science and Technology Agency finds that the high-tech enterprise, ISO9001 international quality management system certification enterprises in Shanxi Province, the quality of AA grade credit rating companies, banks, Shanxi Province AA + credit rating companies, Shanxi Province,"Ninth Five-Year Plan" Science and Technology outstanding new product business, a win-win situation Xinzhou area businesses, contracts and keep promise in the provincial unit of electrical products, electric power industry fixed-point production enterprise, the National Product of urban and rural power grids enterprises in Shanxi Province with the professional production of zinc oxide surge arresters and composite insulators manufacturers.

原平高龙电力设备有限公司位于原平市城西大运路，是由原平市供电局电力开关厂于2006年改制成立的新公司，隶属于忻州供电分公司能元电力建设有限公司，先后获得省科技厅认定的高新技术企业，ISO9001国际质量管理体系认证企业，山西省AA级质量信誉等级企业，山西省AA+级银行信誉等级企业，山西省"九五"科技优秀新产品企业，忻州地区双赢企业，省重合同守信用单位，是电力工业部电气产品定点生产企业，全国城乡电网改造产品推荐企业，山西省内专业生产氧化锌避雷器和复合绝缘子生产企业。

The main content of this dissertation includes: 1. Research on the theory of ultrasonic power supply, introduce its development process. On the basis of these, fix on the scheme of medical ultrasonic low-power supply. 2. According to the principle of modularized design, divide medical ultrasonic low-power supply into four parts. They are power amplify circuit, power control circuit, frequency automatic tracking circuit and matching circuit. Separately research on their theories and design their circuits and necessary programs, especially, effectively resolve the problem tracking the supersonic vibration system with a narrow syntony frequency bandwidth and a high swing. 3. The matching experiments gain good result, and prove that medical ultrasonic low-power supply is entirely up to the mustard on intellectualization, wide band of working frequency, steady output and high efficiency.

本文工作的主要内容包括： 1、研究了超声功率电源的原理，并回顾了它的发展过程，在此基础之上确定本文医用小功率超声电源的设计方案； 2、按照模块化的设计原则，将医用小功率超声电源的设计分解为功率放大电路、功率控制电路、频率自动跟踪电路和匹配电路等四个部分，分别研究了各部分的原理，在此基础之上进行了具体的电路设计和程序设计，尤其是有效地解决了对谐振频率带宽窄振幅高的超声振动系统的频率跟踪问题； 3、通过与超声振动系统的各项配合实验，取得了很好的实验结果，验证了医用小功率超声电源完全满足智能化、工作频带宽、输出功率稳定、输出效率高的设计要求。

Korea put the company at electric power control device - the general type STR (thyratron thyristor power controller) CPU upgrade to system memory type, and early in 2003 to develop cutting-edge new product type constant current, constant voltage type collectively referred to as STR (may silicon-controlled thyristor power controller) the inherent brand. In 2000 to develop the motor starting device - soft starter motor new products and the inherent SMC brand available at the area of power control both at home and abroad alike. Market in 2000 and 2002 patent SSC (packaged solid-state thyratron power controller), as well as sales from the company since its inception back filter with Pulse Timer and other products in the same trade firmly occupy The largest market. Also in 2002 the development of the supply of silicon wafer characterization equipment and sub-Plasma Ion Plating with the most cutting-edge power supply devices and so on, so if the company has high-speed development.

本公司在韩国把电炉电力控制装置-一般型STR升级为CPU系统内存型，与2003年初新开发的尖端产品恒电流型、恒电压型统称为STR 这一固有品牌。2000年开发电动机启动装置-电动机软启动器新产品并以SMC这一固有品牌面市，在电力控制领域受到国内外的一致好评。2000年面市并2002年取得专利的SSC(封装固态闸流功率控制器)，还有从公司创立初期销售至今的 back filter 用 Pulse Timer等产品在同行业中牢牢占据着最大的市场。2002年又开发供应硅wafer分段定性装备及Plasma Ion Plating用最尖端动力供应装置等，因此公司具备了高速发展的依据。

The test bedstand which is composed of electro-motor ,hydraulic pump ,hydraulic motor ,speed verily box and parallel compensating pump, can resolve the problem of power consumption and the power warm while large power hydraulic pump and motor testing.the principle of system is that electro-motor drive the hydraulic pump first,then the pump make the hydraulic motor work through its high pression oil,the follow working hydraulic motor feedback the power in niuju re-drive the hydraulic pump,at last the power is recovered.this bedstand make use of bishi hydraulic system ,which can have a closely construct ,and steadly chuandong ,lower noise ,high power recovery percentage and so on.

本实验台由电动机、油泵、油马达和变速箱以及并联补油泵等一起构成功率反馈实验油路，以解决大功率液压泵及马达在试验时的大功率消耗和能量耗散时的发热问题。实验台由电动机带动油泵，油泵输出油液驱动液压马达，油马达输出的扭矩通过变速箱传动回馈给液压泵的输入轴，从而实现功率回收。采用闭式液压系统，结构紧凑、运行平稳、噪声低、功率回收率高；机械补偿，电动机输入扭矩经变速箱传动驱动液压泵；液压补偿，并联补油泵对系统的高压油路进行流量补偿。

The test bedstand which is composed of electro-motor ,hydraulic pump ,hydraulic motor ,speed verily box and parallel compensating pump, can resolve the problem of power consumption and the power warm while large power hydraulic pump and motor testing.the principle of system is that electro-motor drive the hydraulic pump first,then the pump make the hydraulic motor work through its high pression oil,the follow working hydraulic motor feedback the power in niuju re-drive the hydraulic pump,at last the power is recovered.this bedstand make use of bishi hydraulic system ,which can have a closely construct ,and steadly chuandong ,lower noise ,high power recovery percentage and so on.

本实验台由电动机、油泵、油马达和变速箱以及并联补油泵等一起构成功率反馈实验油路，以解决大功率液压泵及马达在试验时的大功率消耗和能量耗散时的发暖问题。实验台由电动机带动油泵，油泵输出油液驱动液压马达，油马达输出的扭矩通过变速箱传动来回馈给液压泵的输渗入渗出轴，从而实现功率往返收。采用闭式液压系统，结构紧凑、运行平稳、噪声低、功率回收率高；机械补偿，电动机输渗入渗出扭矩经变速箱传动驱动液压泵；液压补偿，并联补油泵对系统的高压油路入行流量补偿。

The test bedstand which is composed of electro-motor hydraulic pump hydraulic motor speed verily box and parallel compensating pump can resolve the problem of power consumption and the power warm while large power hydraulic pump and motor testing.the principle of system is that electro-motor drive the hydraulic pump firstthen the pump make the hydraulic motor work through its high pression oilthe follow working hydraulic motor feedback the power in niuju re-drive the hydraulic pumpat last the power is recovered.this bedstand make use of bishi hydraulic system which can have a closely construct and steadly chuandong lower noise high power recovery percentage and so on.

本实验台由电动机、油泵、油马达和变速箱以及并联补油泵等一起构成功率反馈实验油路，以解决大功率液压泵及马达在试验时的大功率消耗和能量耗散时的发热问题。实验台由电动机带动油泵，油泵输出油液驱动液压马达，油马达输出的扭矩通过变速箱传动回馈给液压泵的输入轴，从而实现功率回收。采用闭式液压系统，结构紧凑、运行平稳、噪声低、功率回收率高；机械补偿，电动机输入扭矩经变速箱传动驱动液压泵；液压补偿，并联补油泵对系统的高压油路进行流量补偿。

The work of this paper is as follows: 1. Looking back the progressing history of the linear motor, introducing the features of the elevator driven by linear induction motor, radicating the topic of this paper "the digital frequency variable control of the elevator bi-side direct driven by linear induction motor". The research of this paper covers the conventional VVVF control, space vector based VVVF control, vector control and DTC.

本文主要开展了以下几个方面的工作： 1 回顾了直线电机发展历史，电机的驱动技术演变，特别是针对直线电机的驱动，简要介绍了直线感应电机驱动电梯的优点和不同结构类型，对传统的v／f控制，基于空间矢量法的v／f控制，矢量控制，和基于电压空间矢量的直接转矩控制进行了比较，确立了本课题的研究主题：直线感应电机双边直推式驱动电梯的全数字变频控制。

The article combines with the treatment of a superficial civil air defense work to introduce how the grouting method to improve the performance of the backfill soil.

文章从治理漂浮人防工事的角度提出了注浆技术在改善回填土性质方面的应用，并详细阐述了注浆技术的施工流程。