查询词典 path difference

The results show that laser-arc welding can achieve full penetration by single-path butt jointing through appropriate parameters; Y shape groove with 8 mm truncated edge can enhance the penetration ability of laser-arc hybrid welding. Low welding speed is good for penetration, however the limitation still exists for hick plates joint. Gap is significant factor of penetration when work pieces is large thickness. The hardness of thick plates joint shows that there is big difference in mold of vertical thermal cycle using laser-arc hybrid welding.

结果表明：通过激光功率等焊接规范匹配，激光-电弧复合焊接能实现20 mm厚板的全熔透单道对接；钝边为8 mm的Y形坡口有助于提高厚板激光-电弧复合焊缝熔透能力；降低焊接速度有利于提高熔深能力；工件厚度较大时，装配间隙对焊缝熔深能力的影响较为显著；接头硬度表明厚板激光复合焊焊缝纵向热循环模式存在较大差异。

There is no distinct difference between the two shrinkages and this is the proper demonstration for the binder path model. The FVF's calculating method is revised using macro-unit model and the newly computed results are compared with the practical ones.

对巨元体法计算纤维体积含量的公式进行了修正，重新计算了所织织物的纤维体积含量，并与实测值进行对比，证明计算值能够代表实际的纤维体积含量。

The paper investigates both block-type pilot linear minimum mean square error algorithm and IEEE802.16 OFDM channel estimation analysis. Simulation results confirm the block-type pilot structure is more suitable for IEEE802.16 system. An optimal pilot setting algorithm, based on space frequency domain, is explored and the pilot chart is presented. The proposed algorithm finds its application in MIMO-OFDM. Simulation results show the algorithm presents a good approximation to the perfect channel state information curve, with about 2dB difference in SNR. The simulation results also demonstrate the algorithm achieves fairly high stability in the environment of fast fading, performance of the proposed algorithm is better that of pilot training channel estimation.3. Taking into account the characteristics of IEEE802.16 OFDM system, OFDM system simulation platform is constructed in Matlab, exploiting simulink as a tool. OFDM modulation and demodulation simulation system are configured on LabVIEW platform. All the system signal processing is simulated, including defining system parameters, designing modulation model, and verifying all the proposed algorithms under different environments, such as white Gaussian noise, multi-path fading, with or without guard interval etc. Bit error performance is evaluated. The research provides valid theoretical basis for practical OFDM system performance evaluation.4. Taking advantage of software radio, the paper designs a hardware platform with both 256-IFFT/FFT and 512-IFFT/FFT OFDM schemes co-existing in one platform. You can predetermine one from the two schemes to carry out almost the same model function with different system performance and parameter setting.5. Referring to IEEE802.16 standard, the paper proposes a design method for generating signals and frames suitable for laboratory investigations implemented in laboratory environment.6. Based on 6701evm digital evaluation card, combined with analogy front-end, the paper designs a DSP software model to deal with baseband signal processing. An overall OFDM scheme, with modulation and demodulation function, is accomplished.

讨论分析了MIMO-OFDM中一种基于空频域的最优导频设置算法，给出了导频图案，通过仿真实验表明，该算法与理想的信道状态信息曲线非常接近，信噪比差距约在2dB左右，并且在快衰落条件下具有较好的稳定性，其性能要优于基于前导训练的信道估计方法。3、根据IEEE802.16OFDM系统特点，论文分别在Matlab中应用Simulink工具构建OFDM系统仿真平台、在LabVIEW平台上实现了OFDM调制解调仿真系统，模拟了整个系统的信号流程，进行了OFDM仿真系统参数的选择和调制模块的仿真设计、论证各算法性能，并根据各种不同的条件：例如高斯噪声、多径衰落、有无保护间隔等，对系统的误码特性进行了评估，为正确评价实际OFDM系统的性能提供了有效的理论依据。4、论文以软件无线电思想作为指导，提出了以256点IFFT／FFT为核心和以512点IFFT／FFT为核心的两种OFDM算法模式并存于同一个硬件平台、且可预选的方案，它们在参数选取和性能指标上有所差异，均实现了相似的模块和功能。5、论文参考IEEE 802.16无线网络标准的参数设置，针对本设计系统的应用环境和系统硬件的性能速率，提出了一种应用于实验室环境的信号结构、帧格式等参数设计。6、论文基于TI公司的6701evm数字评估板卡，结合模拟前端搭建数字中频平台，设计了基带处理的DSP软件模块并进行系统调试，基本实现了一套完整的OFDM调制解调方案。

Construction progress chart compiled with flow process without steps is difficut to show the critical path. The construction period is long and difference is large.

摘要］现行的无节拍流水进度编制方法编制的施工进度计划表难以反映关键路线，得出的工期长而且偏差大。

During the four years study on the project, we develop a dynamical forecast model that describing the subtropical ridge surface. A new theory on the role of the land-sea thermal difference on the formation of the Subtropical High is advanced. It is concluded that in the summer subtropics over each continent and its adjacent ocean LO, SE, CO, and a double-dominant heating from west to east compose a LOSECOD heating quadruplet. The influence of the Eurasia continent on SH varies according to the seasonal variation. From the ideal numerical simulation it is shown the important role of the Eaiuan continent and the huge topography on the mechanism of formation and mantanence of the SH during the summer. It is verified by the numerical simulation that the extension of the subtropical continent into the tropics greatly enhances the " East Asian monsoon". Through the Rossby energy dissipation theory it is verified that the deep latent convective heating induces the onset of the South China Sea monsoon over the Bay of Bengal. The relationship and mechanism between the precipitaiton over the East Asia and the Subtropicla high is illustrated by the data. It is also found the close phase lock between the east-west shift of the SH and the disturbence of the east wind belt over the tropical troposphere. The interaction between the structure and activity feature of the SH and the Meiyu over the Yangtze-Huaihe river valley is revealed from the data. The numerical simulation verified the impact of the different SH pattern on the path of the typhoon.

本项目的研究发展了描述副热带高压脊面变化的动力模型，提出了夏季副热带地区四叶型非绝热加热分布型及相应环流拼图的创新理论；明确了大陆尺度的海陆热力差异在副热带高压形成中的作用；指出欧亚地形对副热带高压和气候的影响随季节变化而变化，通过数值试验证明春季青藏高原的感热加热对亚洲夏季风的爆发地点起了&锚定&的作用，进一步证实了副热带高压断裂和亚洲夏季风的最早爆发地点发生在孟加拉湾东岸；利用Rossby波能量频散理论证明了孟加拉湾深对流潜热释放诱导南海季风爆发的机制；揭示了东亚季风降水的季节内变化与西太副高的关系及机理；揭示了西太副高与东西风带中扰动之间的相互作用过程，指出西太副高的东西活动与热带对流层上空东风带扰动和中纬度西风带扰动的移动和锁相密切相关；研究了夏季淮河流域梅雨期间副高结构和活动特征及其与江淮暴雨的相互作用；验证了不同副热带高压形态对台风路径的不同影响；通过数值试验证明了欧亚大陆和青藏高原等大地形对副热带高压形成和维持的重要作用。

The camera length of electron diffraction in transmisson electron microscopy is one of the main technical parameters in designing electron microscope and the electron diffraction analysis to microcrystal sample. According to Bragg law, the formula of calculating TEM electron diffraction camera length is derived from the research on the ray path of electron diffraction images in TEM and the comparison on electron diffraction with ordinary electronic diffractometer. The difference of physical significance of electron diffraction camera length between TEM and ordinary electronic diffractometer is discussed.

透射式电子显微镜(Transmisson Electron Microcopy， TEM)中的电子衍射相机长度，是电子显微镜设计和对微晶体样品进行电子衍射分析的主要技术参数之一依据布拉格定律，经对TEM中电子衍射成像光路的探讨与研究，并通过TEM与普通电子衍射仪的电子衍射的对比分析，导出了TEM电子衍射相机长度的精确计算公式，阐述了TEM和普通电子衍射仪的电子衍射相机长度所表征的物理意义的区别。

In this series of articles, Blavatsky clarifies the "essential difference between theoretical and practical Occultism," and the gulf that separates harmful occult practices from the occult path of altruism.

在这一系列的文章，blavatsky澄清&的本质区别的理论和实践占卜&，隔阂隐性有害做法，从隐匿路径利他主义。

In this series of articles, Blavatsky clarifies the "essential difference between theoretical and practical Occultism," and the gulf that separates harmful occult practices from the occult path of altruism.

在这一系列的文章，blavatsky澄清&本质区别占卜术理论和实践&、隔阂的做法有害隐性隐匿走利他。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。