查询词典 particles
- 与 particles 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
The preparation of three different shapes a-Fe2O3 nano-particles by means of force hydrolyzation was discussed in this paper. By controlling the experimental conditions (Fe3+ concentration, acidity, reaction time, reaction temperature etc.), the particles with different shapes (ellipsoidal, pseudocubic, sphere) were obtained.
本论文采用强迫水解法制备了三种不同形貌的α-Fe_2O_3水溶胶,通过对反应条件Fe~(3+浓度、酸度、反应温度、反应时间等的控制获得了不同形貌(椭球形、球形、准立方体形)和粒径的α-Fe_2O_3,并利用浸渍—提拉法制备了α-Fe_2O_3纳米粒子薄膜。
-
The results showed that spherical BaCO3 particles with low reaggregation and uniform size of about 100nm could be prepared by using solid-state reaction of Ba(NO3)2 and Na2CO3 at room temperature; while stick shape particles, whose size is not uniform, were obtained for the BaCl2 2H2O and Na2CO3 system. For the Ba(NO3)2 and NH4HCO3 system, the products are spherical whose average size is about 200nm.
利用Ba(NO_3)_2与Na_2CO_3固相反应体系,可以制备出平均粒径约为100nm,形貌近似为球形的纳米BaCO_3;由BaCl_2·2H_2O与Na_2CO_3体系所得产物主要为棒状BaCO_3,且大小不一;由Ba(NO_3)_2与NH_4HCO_3体系可以制备出平均粒径约为200nm、形貌近似为球形的BaCO_3粒子。
-
The second step is that the needle-like β-FeOOH particles dissolve and recrystallize to form α-Fe2O3 particles.
第一步是氢氧化铁转化为针状的β-FeOOH粒子;第二步是针状的β-FeOOH粒子溶解再结晶形成α-Fe2O3微粒。
-
The coupling agents has no obvious effect on the hardness when nano powders were used as strengthened particles.When liquid silica was used to fabricate the composites,nano particles were wraped by PTFE,reunition was prevented.Whil...
其作用机理为当用固体纳米粉末填料时,由于纳米粉末的团聚作用,丧失了部分纳米颗粒的表面特性,界面结合较差,硬度较低;而使用液体纳米硅溶胶制备PTFE复合材料时,纳米颗粒在搅拌蒸发的过程中被PTFE大分子包裹,可以有效防止团聚的发生。
-
The melt elasticity of PP filled with CaCO3 of nano-particles or micron particles or their assembling was studied by capillary rheometry measuring the values of first normal stress difference (N1) and extrudate swell of the systems.
利用高压毛细管流变仪测量的第一法向应力差(N1)和挤出胀大比研究了纳米CaCO3和微米CaCO3分别填充和同时填充聚丙烯体系的熔体弹性。
-
CBF can neutralize some electric charge of colloidal particles and make colloidal particles to sedimentate.
CBF可以中和胶体颗粒表面的部分电荷,使胶粒脱稳沉淀。
-
For pressure drop reduction and collecting efficiency incretion of the air filter, using computational fluid dynamics simulation technology and combineing with the way of experimental test, particles trajectories and distribution rate of deposition in air filters were calculated simulatively, the position where the particles reside easily was obtained.
为提高空气滤清器的减阻增效,采用计算流体力学模拟技术,结合实验测试的方法,模拟计算颗粒在空气滤清器中的运动轨迹和颗粒在滤清器中沉积的分布率,得出颗粒在滤清器中容易沉积的部位。
-
In order to enhance the miscibility between the inorganic and the organic phases,the silanol coupling agent is made from the slane VTMS and the colloid silica. Then the silanol coupling agent and nano-particles of ZnSb2O6 as the conductive filler are successfully bonded and the nano-particles of ZnSb2O6 will become more organic-like. The colloid silane-SiO2-ZnSb2O6 precursor solution is subsequently mixed with a homogeneous lsopropylalcohol solution of SR-399 acrylic monomers (Dipentaerythritol pentaacrylate) and the active free radical agent709. Under nitrogen purging, this reaction solution prepolymerize at 60℃. Then, the solution is spin-coated with the spin coator at room temperature. At last, the coated thin film is cured and crosslinked by the UV curing reactor to form the highly transparent thin film with good optoelectronic properties from hybrid organic-inorganic nano-composite.
首先以矽氧烷VTMS和colloid silica制备矽氧偶合剂,再以此偶合剂对分散於异丙醇溶液之奈米级的colloid ZnSb2O6做有机化改质,以增进其与有机高分子基材的键结相容性,我们将此colloid silane-SiO2 - ZnSb2O6前驱物与SR-399有机基材单体(Dipentaerythritol pentaacrylate)的异丙醇溶液与活性自由基光起始剂709均匀掺混后,在充满氮气反应系统下,加热至60℃进行预聚合反应,接著在室温下以旋转涂布机旋转涂布成厚度均匀薄膜,最后将此薄膜直接高温硬化或以UV硬化机网状键结硬化成透明与具部份导电性等光电特性之无机/有机奈米混成薄膜。
-
The encapsulated TiO〓 particles by polymer were obtained with soapless emulsion polymerization of methyl methacrylate in water in the presence of the pretreated TiO〓 particles.
一种是用偶联剂钛酸丁酯对亲水性TiO〓粒子进行预处理,钛酸丁酯与TiO〓表面羟基反应,交联到TiO〓粒子表面,使TiO〓粒子表面由亲水性转变为憎水性,改善无机粉体与有机单体的亲合性,再进行TiO〓存在下甲基丙烯酸甲酯的无皂乳液聚合,即可得到TiO〓-PMMA复合粒子:另一种方法是用表面活性剂对TiO〓进行预处理,再进行TiO〓粒子存在下甲基丙烯酸甲酯的无皂乳液聚合,TiO〓粒子表面可形成一层均匀的聚合物膜,提出了包覆机理,指出单体在无机粉体表面发生聚合的关键是预先在粒子表面形成聚合场所,即吸附一层表面活性剂。
-
The results show that uniform CdS spheres with 500 nm can be synthesized with controlled concentration of PVP; the greater the concentration of PVP, the greater the diameter of particles, and the more homogeneous the particles; microspheres are composed of small substructural CdS crystallites, and the greater the polymer concentration, the smaller the diameter of substructural crystallites.
结果表明,控制高聚物的浓度可以制备得到直径在500nm的单分散硫化镉微球;高聚物浓度在一定范围内,微球的直径随浓度增大而增大,且分散性越好;微球是由硫化镉的微小单晶沉积而成的,随着高聚物的浓度增大,单晶的尺寸越小。
- 推荐网络例句
-
According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.
曝气设备的动力效率在叶轮转速为120rpm~150rpm时取得最大值,此时氧利用率和充氧能力也具有较高值。
-
The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.
稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世,形体几无变化。
-
When I was in school, the rabbi explained everythingin the Bible two different ways.
当我上学的时候,老师解释《圣经》用两种不同的方法。