查询词典 parameters

The article studies the relationships of geometry parameters, movement parameters and coal lump section of continuous miner.

本文由连续采煤机几何参数和运动参数与切屑断面积的关系式，定性分析了各种因素对落煤块度的影响。

On the basis of the masteries for the aluminum oxide ore pulp drying and calcination, a mathematical model was developed for simulating the process of heat transfer and the calcination of two-phase flow in a new type furnace designed by Zhongzhou Branch Company, China Aluminium Corporation Limited. The fields of velocity, temperature and pressure of the two-phase flow and the reaction time were gained by optimizing calculation under the condition of different operational parameters and geometric parameters. The effect of vent position velocity and atomization particle diameter on the drying and calcination technology of aluminum oxide ore pulp was discussed.

在了解氧化铝矿浆干燥、烧成工艺及设备的基础上，针对中国铝业股份有限公司中州分公司开发的一种新的氧化铝矿浆干燥和烧成炉，建立了矿浆干燥、烧成炉内气固两相流的流动传热以及烧成过程的数学模型，就干燥、烧成炉运行参数及各几何参数进行优化计算，得出了炉内气固两相流动的速度场、温度场、压力场以及颗粒干燥和烧成反应时间，并分析讨论了喷口位置、喷口速度、颗粒雾化粒径等参数对氧化铝矿浆干燥、烧成工艺的影响。

It is concluded that because the mica schist is mixed with feeble weathered granite, the grain is broken up severely; the back-analysis parameters of explosion rockfill(3BⅠ)are lower than the results of laboratory triaxial test, and the Duncan E-B parameters obtained by back-analysis of her sandy gravel (3BⅡ)are higher than the triaxial test results of laboratory triaxial test which can not reflect the mechanical behaviors of the dam material objectively; the research should be strengthened in 300 m high rockfill dam construction. The fitting modes of the space displacement field of prototype observation are also explored and it turns out that the results of IGA analysis considering only vertical deformation meet the need of dam's technical accuracy.

结果表明，由于在微弱风化花岗岩掺加云母片岩，颗粒破碎严重，爆破堆石料（3BⅠ）的原级配粗粒料反演参数远低于室内三轴试验成果；与3BⅠ堆石料相反，砂砾料（3BⅡ）现场反演得到的邓肯E~B模型参数高于室内三轴试验值；室内三轴试验成果不能客观反映筑坝材料的力学特性，对于当今的300 m级高土石坝建设，宜加强对原级配粗粒料的力学特性研究；同时对原型实测的空间位移场不同拟合方式进行了探讨，认为仅考虑铅直向变形的IGA参数反演成果能基本满足土石坝工程的精度要求。

The perturbation methods are the common analyzing method for studying thevibratory response of the mistuned bladed disk, but different perturbation methodshave their own relying conditions on the system parameters. In this dissertation, threekey perturbation methods are studied for their application conditions. Their relyingconditions on the system parameters are summarized.

本文对三种常用摄动法的构造特点及其适用性进行了研究，总结了它们在分析失谐叶盘系统振动响应时对于系统参数的适用条件；针对自适应摄动法在分析失谐叶盘系统振动响应时，对于基系统模态的选择难以控制的问题，提出了一种模态自动选择法。

This paper deals with and summarizes the research and importance of ductile shear zones and presents the future direction and aim for the research of the ductile shear zones around the world. Four aspects of studies of the ductile shear zones have been proposed in this paper as follows:(1) The stress environment including the mineral assemblages, deformation, stress-shearing parameters;(2) The major element sequence and activation under condition of stress;(3) The variations of trace elements and REE, their transportation distributions under strong natural deformation as well as variations of mineral crystal parameters, which can also control the element changes during the ductile deformation;(4) The relationship between element migrations, activation and stress, which will present the new evidences for the studies of dynamic diagenesis and mineralization as well as the studies of evolution of ductile shear zones developed in middle and low levels.(5) The analysis of elements and isotopes in mylonites on the micro-scale are crucial for the understanding of component migrations during the mylonization.

对韧性剪切带及其变形岩石的研究现状和研究意义进行系统的综述，提出了未来韧性剪切带及其糜棱岩的研究方向和目标：①系统研究糜棱岩中主要造岩矿物组合及其变形特征，计算剪切变形岩石的应力－应变参数，搞清韧性剪切带所处的应力应变环境；②系统研究韧性剪切带岩石在天然分强剪切应力作用条件下常量元素迁移机制及活化转移的应力排序问题；③系统研究剪切变形作用过程中岩石化学组成的微量和稀土元素变化，讨论强变形条件下岩石中微量元素活化和迁移规律，深入探讨微量元素迁移的动力控制，包括稀土元素配分变化的应力制约以及应变矿物晶格化学变化行为及其对其寄主的变形岩石元素在应变过程中迁移变化的制约和影响；④从理论上探讨天然强剪切应变条件下岩石中组分活化、转移与应力的因果联系，为深入探讨韧性剪切带动力成岩作用提供理论的科学依据，为探讨中、下地壳中韧性剪切带的形成和演化提供科学依据，同时为韧性剪切变形作用条件下成岩、成矿地球化学作用提供理论和实验依据；⑤现代分析技术如激光同位素原位分析以及激光ICP-MASS分析技术对研究变形域内的岩石的元素和同位素的活化迁移规律，对深刻揭示糜棱岩化过程中的元素活化迁移机制提供更高质量的地球化学证据具有重要的作用。

With the optimization of the test results, the best extrusion system parameters were obtained based on the filtration time of worts. And the main indexes of worts under the best extrusion system parameters were better than the control's.

通过对试验结果的优化分析，得到了以糖化醪过滤时间为指标的大米啤酒辅料挤压膨化系统最佳参数；在此参数下所制辅料，经糖化后所得麦汁的各项指标均优于对照。

There are ten chapters in the thesis, we analyze the structure and movement of the wefting mechanism and the shuttle box detailedly. The first chapter introduces some basic things about the task, establishes the research course and some performance guide lines, and lists the rebuilding contents and idiographic parameters. In the second chapter, with the whole structure of the heavy wide loom, the thesis briefly introduces a looms component parts and some important weaving parameters, and we may design and analyze it in terms of them. In the third chapter, the thesis discusses the wefting principle,we may make reference to the wefting principle of the ordinary gripper shuttle loom.

第一章主要介绍与课题相关的一些基本情况，在确定其研发进程和一些性能指标的同时，针对JURGENS织机，给出此次改造的内容和该织机的具体特征；在第二章中，论文首先给出织机的整体架构，并简略地介绍织机的各组成部分和一些重要的织造参数，以此作为重型宽幅织机设计和分析的基础；在随后的第三章中，主要阐述重型宽幅织机的引纬原理，详细地分析其整个动作过程，由于重型宽幅织机与常规片梭织机在引纬原理上有相似之处，为此对照常规片梭织机的引纬原理阐明其合理性与优越性：第四章则是对重型宽幅织机所特有的引纬器进行分析，在这部分我们也采用比较分析的方式介绍大型片梭，在对其结构进行分析的同时，也对大型片梭上容易疲劳的部件进行应力分析，以期求得到合理的结构。

The chinese character menu under the graphics model is adopted as a interface which communicates the operator to the master computer. The C language is used to program the data system and the operating system. All the welding parameters are stored in the database of the master computer and those welding parameters which are frequently used are defined beforehand, furthermore the selectable extent of each welding parameter is given according to the variers welding technology. Mouse can input and change all the data and the welding order. In order to control the welding parameter on the spot in real-time, the remotely controller is designed.

本焊接机主机的数据系统和操作系统采用图形模式下的汉化菜单作为接口，主机的数据系统和操作系统均采用C语言编程；全部焊接参数都被固化在主机的数据库中，并预先定义了常用的焊接参数，每一参数根据不同工艺给定了参数选择范围，全部数据和命令可用鼠标输入和改变；另外，为便于焊接现场对焊接参数的实时控制，设计了远控盒。

According to verifying 11 vacuating wells parameters such as structure and sand body thickness that have been predicted by model, it shows high coincidence rate of more than 90% to real datum. Moreover, the permeability variation in pilot site accords with water flooding situation. The computed parameters such as reserves, cumulative oil production of single well and area, water cut have small relative error of less than 2%, the matching accuracy degree is high.

通过11口抽稀井检验，模型预测的构造、砂厚等参数与实际情况相比，符合率在90%以上；试验区的渗透率变化与水淹状况也具有较好的一致性；储量、区块及单井累积产油量、含水等参数计算的相对误差均小于2.0%，拟合精度高。

And objective parameters (texturized degree, color, hardness, springiness, chewing, water absorption, yield, etc.) were investigated in the high moisture soy protein extrusion process, and the statistical models of system and objective parameters were built, using the step-by-step regression analysis; A comprehensive evaluation of the products, and the process optimization of high moisture extrusion were obtained,using factor analysis; Secondly, residence time distribution and soy isoflavones losses kinetics were studied in the high moisture extrusion; Finally, chemical bonding process, the micro-structure and protein secondary structure changes were investigated in the texturization of soy protein, then the mechanism assumptions of texturization soy protein by moisture extrusion were proposed.

本文对大豆蛋白高水分挤压组织化技术和机理进行了研究，研究内容包括：首先采用系统分析法，研究了大豆蛋白高水分挤压过程中，挤压机操作参数(螺杆转速、物料水分、喂料速度和机筒温度)对系统参数(系统压力、扭矩、单位机械能等)、目标参数(组织化度、色泽、硬度、弹性、咀嚼性、吸水率、产量等)的影响规律，建立了各因变参数的统计模型；采用因子分析法对产品进行了综合评价，并对高水分挤压组织化工艺进行了优化；其次，研究了大豆蛋白高水分挤压中的停留时间分布以及大豆异黄酮的损失动力学；最后，研究了大豆蛋白组织化过程中化学键、微观结构和蛋白质二级结构的变化规律，提出了大豆蛋白高水分挤压组织化的机理假设。

Objective:To explore the feasibility of laparoscopy in diagnosing and treating of abdominal diseases.

目的：探讨腹腔镜用以诊断腹部外科疾病及选择治疗方案的可行性。

The lifetime of nylon 1010 and nylon 1010/POSS composites decreased with increasing temperature.

热重-红外联用分析表明尼龙1010在氮气气氛下的降解产物主要为小分子的低聚物，POSS并不改变尼龙1010降解产物的组成。