查询词典 oxyacetylene welding

This paper expounds the oxyacetylene flare overlaying welding technology of tungsten carbide rod made to be metal matrix carbide ceramal compound overlaying welding layers.

介绍碳化钨条氧乙炔火焰堆焊制备金属基碳化物陶瓷复合耐磨堆焊层的工艺方法，结合碳化钨条氧乙炔火焰堆焊工艺过程、堆焊层性能特点、泥沙磨损实验结果及显微组织形貌，分析讨论了热源性质对堆焊层性能的影响以及复合耐磨堆焊层的抗泥沙磨损特性。

An oxyacetylene torch; oxyacetelyne welding.

氧乙炔火炬；氧乙炔焊接。

The remaining 20%of the acetylene production is principally used for oxyacetylene cutting, heat treating, and welding.

乙炔生产的剩余20%主要用于氧乙炔切割、热处理和焊接。〖产品安全

If oxyacetylene flame or plasma is adopted, surface coat that can impact welding quality shall be removed after cutting.

当采用氧乙炔焰或等离子切割时，切割后必须除去影响焊接质量的表面层。

6 Oxyacetylene flame can' be used for welding of pipeline.

7.1.6 管道焊接不得使用氧乙炔焰焊接。

The microstructure of the coating and the mechanism of the wear resistance were analyzed. Compared with the coating using oxyacetylene flame process, results showed that the wear resistance of coating prepared by plasma spray welding process is higher than that of the coating using oxyacetylene flame process.

进而对涂层的微观组织和耐磨机理进行了分析和研究，并且与氧乙炔火焰喷焊技术所制备的涂层进行了对比测试分析，结果表明，利用等离子喷焊技术所制备的超厚涂层耐磨性能更为出色。

Our company has different types of cobalt-base alloy powder, which can meet the requirements of laser cladding for plasma surfacing and oxyacetylene flame welding.

我公司生产的钴基合金粉，既有适合等离子堆焊的、激光熔敷的，也有适合氧乙炔焰喷焊的，下面介绍的钴基喷焊合金粉，采用塑料桶和铁桶封装，但由于粉末颗粒较细，极易吸潮，建议用户在使用前经120℃保温两小时烘干后使用为佳。

The most common is the oxyacetylene welding, namely the use of acetylene and oxygen produced during combustion of oxyacetylene flame to melt the workpiece and the wire heating, condensation formed after the seam welding method.

最常用的是氧乙炔焊，即利用乙炔和氧混合燃烧时所产生氧乙炔焰，来加热熔化工件与焊丝，冷凝后形成焊缝的焊接的方法。

The welding of end ring of alternating current machine and the conducting bar is the key technology for manufacturing of asynchronous traction motor with high power. China South Locomotive and Rolling Stock Industry Corporation had taken this significative study as a key project for the manufacturing of alternating current machine. According to the welding of end ring of alternating current machine, the welding of copper and copper alloy is described in this paper. Results obtained in this study are as follows. 1.By the comparison of oxyacetylene gas brazing, induction brazing and resistance brazing, it was found that high-quality welding joint could be obtained by induction brazing, which also had the highest efficiency.

交流电机端环与导条的焊接是大功率异步牵引电动机制造的一项关键技术，开展其焊接工艺研究具有重要的意义，中国南车电机公司将此课题作为解决交流电机制造的一个重点项目，本文结合交流电机转子端环焊接的课题，对铜及其合金的焊接进行了研究，主要研究结论如下： 1、通过氧乙炔火焰钎焊、感应钎焊、电阻钎焊等焊接方法的对比试验发现感应钎焊可获得优质的焊接接头，且感应钎焊的焊接效率也是最高的。

Can be cut 1mm-60mm thick, plasma cutting machine, oxyacetylene cutting machine, dc welding machine, welding, gas welding, arc welding of carbon dioxide and other auxiliary equipment.

可割1mm-60mm厚的等离子切割机，氧乙炔切割机，直流氩弧焊机，电焊，气焊，二氧化碳保护焊等辅助设备。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。