查询词典 optimal process

In chapter six, the vender markov process and renewal process are used to analyze deteriorating items inventory control .The steady balanceable target function is established and the optimal inventory control strategy is given.

第六章引入向量马氏过程和更新过程对随机易腐物品的最优存储进行了基本分析和探讨，给出了模型从稳态下的目标函数，并提出了最优的库存控制策略。

The optimal process parameters and conditions were introduced as following: the best stripping effect with dosage of blankit 2.0g/L and one bath redyeing process with disperse and ANOSETWPN acid dyestuffs at 105~115℃, 15~20min.

实验得出，漂毛粉浓度控制在2.0g/L时，剥色效果最佳；染色选用ANOSEWPN酸性染料，采用分散／酸性－浴法进行染色，染色温度105~115℃，保温15~20min。

Cotton and silk fabrics were dyed with natural carminic acid after the Iron ion pre-mordant treatment. The K/S values of the fabrics were characterized. The single factor process experiments were carried out for mordant concentration, temperature and time. The optimal process parameters were mordant concentration cotton: 1×10^(-3mol/L and 10 min at 90℃; silk: 1×10^(-3)mol/L and 10 min at 40℃.

将铁离子前媒染处理后的棉、丝织物采用天然染料胭脂虫酸进行染色，以染色织物的K/S值进行表征，对媒染剂浓度、温度、时间3个因素进行了单因素工艺实验，得到了铁离子前媒染棉、丝织物的最佳工艺参数（棉：1×10^(-3)mol/L， 90℃，10分钟；丝：1×10^(-3)mol/L， 40℃，10分钟）。

objective:to study the microwave assisted extraction process for active ingredients in erysimum cheiranthoides l..methods:using the orthogonal experimental design,the optimal process of microwave assisted extraction for erysimum cheiranthoides l.

目的研究微波辅助萃取桂竹糖芥的提取工艺。方法通过正交设计的方法，采用连续微波辐射方法进行微波萃取工艺的优化。

Finally, simulation software was developed with Visual C++ and Delphi for 2D molding analysis of MIM, which affords facilities for the quality forecast of 2D thin wall parts and optimal design of mold and process parameters. In the research of molding performance of MIM feedstock, for the shortcoming of capillary rheometry, it was propounded that using spiral mold test molding performance of feedstock, and a set of spiral mold was creatively designed with quickly exchange gates and closed mold cavity. With the spiral mold, an orthogonal experiment was made on getting regress equation of flow length L〓 of the heavy alloy feedstock. Then the rule of L〓 varying with Q〓, P〓, and ΔT〓 was discovered. Q〓 ranks first in the influence on process parameters of molding performance, P〓 and Δ T〓 second. Therefore the injection rate Q〓 should be controlled primarily to improve the flow performance of feedstock.

在MIM喂料注射成形性能研究方面，针对毛细管流变仪测试法衡量流动性能的不足，提出使用螺旋线模具测试喂料熔体的注射成形性能，创造性地设计了一套可快换浇口，模腔封闭的螺旋测试模，并在螺旋测试模上采用正交实验设计，得出了高密度重合金喂料流动长度L〓的回归公式，揭示了L〓随Q〓、P〓、△T〓和S〓的变化规律，并得出工艺参数对成形性能影响的强度顺序为Q〓最大，P〓与△T〓其次，因而改善喂料流动性能应优先控制注射速率Q〓。

By process testing, we discovered the optimal rigidity matching value of friction 30CrSiMoVA Steel with the powder metallurgy material, and put forward an new heat treatment process.

通过工艺试验，找到了30CrSiMoVA钢与某粉末冶金材料相互磨擦时的最佳匹配硬度值，提出了一种热处理新工艺。

Moldflow software was used for searching for optimal parameter of forming process of ABS gusset plate by simulating real condition. Some main factors which influenced the process of injection molding were found out after the simulation analysis of filling and flowing.

通过模拟真实注射条件，应用Moldflow软件对ABS扣板注射成型工艺参数进行了优化分析，得出影响注射成型顺利进行的主要因素，并模拟制定出扣板注射成型的最佳注塑压力、锁模力、模具温度、熔体温度、注塑时间、保压压力、保压时间和冷却时间。

Making use of the past production data of concentration plant to work out dynamic curve of process flow index and making correction of the displacement of the dynamic curve,then making correlation analysis of various index with corrected curve ,the optimal process flow index of raising gold recovery rate can be found out.

应用过去选厂的生产数据作&流程指标动态曲线&，并对动态曲线作位移改正，用改正后的曲线对各种指标进行相关性分析，寻求出提高选金回收率的最佳流程指标。

Based on the balanced exergy grand composite curve and the improved shiftwork targeting method, the top-level analysis approach and its strategy are developed. It is employed to direct the analysis and diagnosis of the energy-utilization of the overall low-temperature process system in order to find out the optimal target to modify the process.

以低温过程系统平衡的有效能总组合曲线为分析工具，提出了基于改进轴功目标法的低温过程系统顶层分析方法，用以分析低温过程系统的能量流动，发现最佳的过程改进目标。

The project for passenger cars with engine piston aluminum alloy, alloy components through optimal design, rare earth - Modification of phosphorus salt air and bottom melting slabs, metal-cast aluminum piston at the end of riser feeding process, heat treatment process parameters of choice , Nano-Detroit surface coating materials, such as key technology research and development with a density of small, light weight, thermal conductivity, and coefficient of thermal expansion of small, high temperature and have sufficient strength, wear and corrosion resistance , Aluminum piston size and good stability, its integrated technical indicators have reached the leading domestic level.

项目介绍（简介、技术特点、应用范围、市场前景、效益分析及对投资者要求。500字以内）本项目针对乘用车发动机用铝合金活塞，通过合金成分优化设计、稀土－磷盐复合变质处理与炉底透气砖熔炼技术、铝活塞金属型铸造底冒口补缩工艺、热处理工艺参数的选择、纳米级活塞表面涂层材料等关键技术的研究，开发出具有密度小、质量轻、热传导性好、热膨胀系数小，并具有足够的高温强度、耐磨和耐蚀性能、尺寸稳定性好的铝合金活塞，其综合技术指标达到国内领先水平。

Nowadays, most of research are to build a transmutative Petri Nets through adding controlling place sets, controlling arc sets and controlling policy to the basic Petri Nets, while the Controlled Petri Nets could be used to argue many controlling theory problems conveniently and to induce many logically and physically supervisory and solve the Event Feedback Controlling Problems and State Feedback Controlling Problem in DEDS supervisory theory.

目前大多数的研究表现为在变形后的受控Petri网基础上，利用各种方法求得各种逻辑型、结构型控制器，解决DEDS监控理论中的事件反馈控制问题与状态反馈控制问题。

On one hand, there are discussions with the works council and union about extension of short time working up to the end of September.

一方面，有讨论，工程理事会和联盟关于延长工作时间短至9月底。