查询词典 nickel-chromium-iron alloy

The testing results showed that the optimal reduction conditions are 1320℃ for 120 min and the proportional mass fractions of activated carbon powder and the additive A are 3% and 5%, respectively. The additive A accelerates the aggregation of metallic grains so as to make the enriched metallic grains easier for magnetic separation. The mass fraction of maximum nickel in ferronickel alloy and nickel recovery in the laterite-nickel ore are 8.31% and 95.44%, respectively. Metallic nickel is thus enriched.

研究结果表明，最佳反应条件：还原温度为1320℃，还原时间为120min，还原剂与添加剂的质量分数分别为3%及5%；添加剂可促进金属晶粒的聚集，富集的金属晶粒更易于磁选分离；还原产品镍铁合金中镍的质量分数可达8.31%，矿石中镍的回收率可达95.44%，金属镍得到了富集。

Based on this analysis, a new method for evaluating the bluntness magnitude of a Berkovich indenter was proposed. This method was examined by the experimental results of indention loading curves for pure nickel and aluminum alloy 8009, and good agreement was obtained. For thin metal films deposited on hard substrate, a method is established for determining the yield strength and hardening index of the film from nanoindentation loading curve.

通过对理想与钝化Berkovich压头以及球形压头纳米压入软膜/硬基材料加载过程的数值研究，给出了两种压头纳米压入加载曲线的幂函数拟合指数及最大压入载荷同膜、基材料基本力学性能间的函数关系，并分别就Berkovich压头与球形压头建立了由纳米压入加载曲线确定沉积在陶瓷基体上金属薄膜屈服强度与硬化指数的方法。

Miao silver non-silver is an alloy Miao, the main material is copper-nickel alloy, nickel, and 25% silver.

苗银非纯银，是苗族一种合金，主要材料是白铜、镍、和25%银。

Stainless steel always has nickel as an alloy.

不锈钢总是作为一个镍合金。

Stainless steel concave end knurling;DIN915 Stainless steel cylindrical end; DIN914 Stainless steel pointed end; DIN916 Stainless steel concave end; DIN913 Stainless steel flat end; DIN551 Stainless steel slotted point; DIN906 Stainless steel oil plug,semi-circular; Stainless steel two-end hexagonal non-standard; Brass internal hexagonal,cross,non-standard; Brass wobbler,nickel-plated; Stainless steel ,alloy steel heat-resistant; Alloy steel zinc-plated; Alloy steel semi-circular; DIN915 Alloy steel cylindrical end, Philips screw non-standard; DIN916 Alloy steel concave end;DIN914 Alloy steel pointed end;DIN906 Alloy steel oil plug; Corrugated ball; Two-end internal hexagonal non-standard; Textile machine screw-nail; Tool-post screw-nail

不锈钢凹端滚花；DIN915 不锈钢柱端；DIN914 不锈钢尖端；DIN916 不锈钢凹端；DIN913 不锈钢平端；DIN551 不锈钢一字槽；DIN906 不锈钢油塞、半圆；不锈钢2头内六角非标；黄铜内六角、十字槽、非标；黄铜梅花头、镀镍；不锈钢、合金钢耐落；合金钢镀锌；合金刚半圆；DIN915 合金钢柱端、十字槽、非标；DIN916 合金钢凹端；DIN914 合金钢尖端；DIN906 合金钢油塞；波珠；2头内六角非标；纺织机螺钉；刀架螺钉。

In order to recover nonferrous metals in copper-nickel alloy scrap, a corresponding technology was adopted as follows crushing copper-nickel alloy scrap→leaching the sample with sulfuric acid→extracting copper ion with N902→extracting zinc ion with P204→getting nickelous sulfate solution.

摘 要：采用粉碎白铜合金废料→酸浸出→N902萃取分离出铜离子→P204萃取分离出锌离子→水相中剩余硫酸镍溶液工艺回收白铜合金废料中的有色金属。

In order to recover nonferrous metals in copper-nickel alloy scrap, a corresponding technology was adopted as follows crushing copper-nickel alloy scrap→leaching the sample with sulfuric acid→extracting copper ion with N902→extracting zinc ion with P204→getting nickelous sulfate solution.

采用粉碎白铜合金废料→酸浸出→N902萃取分离出铜离子→P204萃取分离出锌离子→水相中剩余硫酸镍溶液工艺回收白铜合金废料中的有色金属。

The Company has been established for 20 years, and is continuously specialized in precise galvanization, coupling and lead frame galvanization, printed wiring board galvanization, hardware galvanization, nickel cobalt alloy electrolytic casting, profession products, and aluminum material surface treatment etc. Products include thionamic nickel sulfamate, cobalt sulfamate, nickel carbonate basic, cobalt carbonate basic, nickel acetate, and cobalt acetate etc.

公司成立20年来，一直为精密电镀、连接器与引线框架电镀、印刷电路板电镀、五金电镀、镍钴合金电铸、铝材表面处理等行业产品提供高品质的氨基磺酸镍、氨基磺酸钴、碱式碳酸镍、碱式碳酸钴、醋酸镍、醋酸钴等产品。

Scrap Metals: Copper, phosphor copper, brass, Nickel Silver, Bronze, mechanical copper, copper-nickel alloy plating, brass-plated white , motor copper, copper wire, copper scrap, environmental protection, tin, silver tin, air-conditioning aluminum (crumbs, the machinery aluminum, 304 # stainless steel, zinc alloy, playing Word lead, gold, silver, nickel scrap, scrap titanium, tungsten steel, precious metals, molybdenum wire, etc.

废金属：（紫铜、磷铜、黄铜、洋白铜、青铜、机械铜、镀白铜、镀白黄铜、马达铜、铜丝、铜屑、环保锡、含银锡、空调铝、机械铝、304#不锈钢、锌合金、打字铅、镀金、镀银、废镍、废钛、钨钢、钼丝贵重金属等） 2。

The method for making the solar endothermic coating by using the nickel or nickel alloy hollow sphere as the absorbent adopts simple equipment and simple and feasible process; the prepared solar endothermic coating is a metal-resin type composite coating; the absorbent is nickel or nickel alloy powder with a hollow structure; a filling agent is made of macromolecule resin; the thickness of the coating is controlled between 10 and 100 mu m; the color of the coating is gray-black or black.

本发明采用的设备简单，工艺简单易行，所制备的太阳能吸热涂层为金属-树脂型复合涂层，吸收剂为具有空心结构的镍或镍合金粉末，填充剂为高分子树脂，涂层厚度控制在10～100μm，涂层颜色呈灰黑色或黑色。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。