查询词典 modulus

A medium modulus polyester alloy suited for injection molding of Air Bag Deployment Doors.

以中等模量聚酯合金适合注塑成型的气囊门。

Ccording to the characters of porous metals, a new effective bulk modulus formula with simpler expression was obtained by considering the heat exchange between the metallic skeleton and air in pore on the basis of phenomenological Biot-Allard model, therefore an extended sound absorption model was put forward.

bstract 根据金属骨架多孔材料的特点，在Biot-Allard刚性骨架多孔材料内流吸声模型的基础上，考虑金属的热导特性，推导出一种新的、形式较简单的有效体积模量表达式，从而得到了一种扩展的吸声模型。

That is using the dynamic torsional shear apparatus, the tests of dynamic strength, dynamic modulus and damping ratio of Yangling unsaturated intact loess are carried out by using torsional cyclic load triaxial apparatus under different moisture condition, and the pore water pressure and pore air pressure of unsaturated intact loess are measured in testing process, as well as the obvious regularity are acquired from the study results.

将该方法应用于对杨凌非饱和黄土在不同湿度条件下进行了动强度及动模量和阻尼比试验，试验过程中实现了对非饱和黄土的孔隙水压力和孔隙气压力的动态测量，试验结果取得了比较明显的规律性。

This article introduces the structure, principles and performance of several low-noise gear pumps, analyses that gear pump is the noise source in the new internal combustion forklift and battery forklift, provides some methods which can reduce the gear pump noise, and establishes the matching relation between gear modulus and pressure angle of the gear pump, which is applied to the new internal combustion forklift and forklift battery.

摘 要：本文介绍几种低噪声齿轮泵的结构、原理和性能，分析了新型内燃叉车和电瓶叉车中齿轮泵是噪声源，给出了可降低齿轮泵噪声的方法，建立了该种齿轮泵的齿轮摸数和压力角匹配关系，并在某新型内燃叉车和电瓶叉车上得到应用。

B〓C coating possessed 4% of porosity, 12. 8Gpa of bonding strength, 28Gpa of microhardness, and its modulus is up to 230Gpa. It would provide a kind of coating material with excellent properties for many industrial fields.(2) The phase composition of B〓C coating was studied by XPS, XRD and EDS. It was found that: the oxidation activity energy of B〓C powder and coating is different, which is due to the difference of phase composition between them.

用XPS、XRD和EDX研究了碳化硼涂层的相组成，发现碳化硼粉末在涂层形成过程中不可避免的存在分解；比较了碳化硼涂层和粉末在高温下的氧化行为，发现涂层的氧化活化能比粉末要低，这是由于涂层和粉末相组成不同所造成的。

On the base of studying the Bend Pipe Machine 's work principle, the PRO/E software was adopted, and the STAR-03W single-modulus Numerical Control Bend Pipe Machine was designed, including the bending axis and bending arm, Y-B assembled part, adjusting equipment and the lathe bed and so on.

本文在研究弯管机工作原理和机械结构的基础上，采用 PRO/E 技术，设计了STAR-03W 单模数控弯管机的机械结构，包括弯曲轴、弯曲臂、Y-B 向组合机构、调整装置和床身设计等。

The results show that the CNTs are dispersed effectively by bell jar immersing precast block casting. The maximal tensile strength and the elongation of the AZ31/CNTs composites are enhanced by 41.3% and 119.4%, respectively, and the elastic modulus and micro-hardness are also raised by 67.8% and 66.9%, respectively, when compared with those of the as-cast AZ31 Mg alloys. The CNTs can greatly refine the grains of the composites, playing a good role in reinforcing the matrixes of AZ31 Mg alloy. The fracture sections of the composites mainly consist of dimples and prisms, which demonstrates quasicleavage fracture modes.

结果表明：钟罩压块法可以有效地将碳纳米管分散到镁合金熔体中；CNTs对AZ31镁合金的力学性能有较强的增强效果，与本研究中的铸造AZ31合金相比，AZ31/CNTs复合材料的最大抗拉强度和伸长率分别提高41.3%和119.4%，弹性模量和显微硬度分别提高67.8%和66.9%；CNTs对AZ31镁合金基体晶粒的细化作用显著，与镁基体界面结合较好；复合材料试样断口形貌由韧窝和撕裂棱组成，呈现准解理断裂特征。

The results show that the CNTs are dispersed effectively by bell jar immersing precast block casting. The maximal tensile strength and the elongation of the AZ31/CNTs composites are enhanced by 41.3% and 119.4%, respectively, and the elastic modulus and micro-hardness are also raised by 67.8% and 66.9%, respectively, when compared with those of the as-cast AZ31 Mg alloys. The CNTs can greatly refine the grains of the composites, playing a good role in reinforcing the matrixes of AZ31 Mg alloy. The fracture sections of the composites mainly consist of dimples and prisms, which demonstrates quasi- cleavage fracture modes.

结果表明：钟罩压块法可以有效地将碳纳米管分散到镁合金熔体中；CNTs对AZ31镁合金的力学性能有较强的增强效果，与本研究中的铸造AZ31合金相比，AZ31/CNTs复合材料的最大抗拉强度和伸长率分别提高41.3%和119.4%，弹性模量和显微硬度分别提高67.8%和66.9%；CNTs对AZ31镁合金基体晶粒的细化作用显著，与镁基体界面结合较好；复合材料试样断口形貌由韧窝和撕裂棱组成，呈现准解理断裂特征。

The program is the first of blanking-punching composite punch, then bending modulus composite production.

采取的工艺方案是先落料—冲孔复合冲压，然后再弯曲，采用复合模生产。

The results show that:(1) The penetration resistance of functionally graded layered armour made of metal Matrix Composites is better than that of the Aluminum plate;(2) The penetration resistance of the functionally graded layered armour whichlay_up is 0%/57%/0%/26%/0%/12%/0% is the best;(3) The resistance penetration of the the functionally graded layered armour can be greately promoted through optimizing the lay_up and volume fraction of the reinforced particle;(4) The functionally graded armour in which the particles distribute continuous has better behavior of resistance penetration when the volume fraction of the reinforcements are constant;(5) The higher volume fraction of the reinforcements at the surface of FGM and the more non-homogeneous the reinforcements distribution, the higher thesurface Youngs Modulus and the flow stress are;(6) The behavior of penetration resistance of the functionally graded armour in which the particles distribute continuously is better than that of homogeneous steel plate;(7) The functionally graded armour provedes a important approach for the optimization and design of the resistance penetration;(8) The numerical results of simulation of the bird striking the aircraft structureshow that the finite element model of the balance leg is effective;(9) The numerical results show that the structure internal force is relative largewhen the bird strikes the top of the balance leg;(10) The process of the birdstrike is thaf.after the bird penetrting through the front skin of the balance leg and striking the front beam,the bird is broken up in three parts.

经过本文所进行的数值模拟后我们发现：(1)在层状梯度装甲板的抗侵彻过程中层状功能梯度板比铝板的抗侵彻性能好；(2)在层状梯度装甲板的抗侵彻过程中铺层顺序为0%/57%/0%/26%/0%/12%/0%的功能梯度装甲板的抗侵彻性能最好；(3)通过优化组合层状梯度板的铺层顺序以及增强颗粒的含量可以大大改善梯度板的抗侵彻性能；(4)当SiC颗粒体积含量一定时，增强颗粒连续分布的功能梯度板表现出了优越的抗侵彻性能；(5)增强颗粒连续分布的功能梯度板表面SiC颗粒体积含量越高，分布越不均匀，表面的弹性模量就越高，屈服应力就越高；畜此工业大学硕士研究生学位论丈(6)增强颗粒连续分布的功能梯度装甲板比匀质钢板表现出良好的抗侵彻性能；(7)功能梯度装甲板为整个抗侵彻性的优化设计提供了重要的途径。

Vishnu entered a dark fourth dimensional dream that did not support his field or continued life.

毗瑟挐进入了一个第四密度的黑暗梦想，那里并不支持他的能量场或继续生命。

Leaders and decision-making persons use it to collect the data, including the information of unit work, handing in fee, oweing fee, prepaying fee,changing and afterpaying and account transfering of joining-insurance employee, and account paying of all kinds of insurances from hospitalization insurance institutions.The collected data is picked up, organized, switched and showed to user.

该子系统主要面向各级领导、决策分析人员；从各个医疗保险经办机构和定点医疗机构采集数据，包括在各个医疗保险经办机构处理的单位办公信息，单位缴费、欠费、预缴费信息，参保职工变更信息，参保职工增减变动信息，参保职工补缴信息，参保职工帐户划拨信息：包括各定点医疗机构处理的各险种帐户支出信息，各险种的统筹金支付信息等；将采集的数据提取，组织和转换，然后展示给用户。