查询词典 metal-lined

In this paper, material properties of the segment of the porous metal-bonded diamond grinding wheel were researched by finite element simulation. Segments were manufactured according to the design result and their elastic modulus was measured. The key points are as follows: The influence of the porosity on the elastic modulus was analyzed through a finite element method. In the FEM model, the design variable only includes the porosity, and the tetrakaidecahedron model is applied as the microstructure model of porous metal matrix. The corresponding porosity was decided in order to meet the requirement of the elastic modulus.

本文利用有限元软件对多孔金属结合剂金刚石砂轮节块的材料性能进行了数值模拟计算，依设计结果制备了节块试样，并测试了节块的弹性模量，主要内容有： 1、充分借鉴多孔材料结构设计和分析的方法，以十四面体模型为多孔金属胎体的微观结构模型，以孔隙率为设计变量，通过有限元分析，计算出满足一定弹性模量要求的多孔金属胎体的孔隙率范围。

A direct method to prepare nanometre catalyst of positive electrode for methyl alcohol fuel battery is to add strong oxidant to a mixed solution of manganese nitrate and some other metal nitrate, to coat them on the graphite electrode to have catalyst precursor produced, then to prepare the non-platinum nanometre catalyst of metal ion-doped manganese dioxide with carbon as a carrier by thermolytic reaction of the in-situ precursor. The prepared catalyst has the advantages of high electrical catalytic activity of methyl alcohol, high performance to protect against CO poison and low price, and it can lower the battery manufacturing cost effectively as well as can raise the entire electrical property of the battery so that the price performance and the market competitive edge of the battery are enchnaced effectively.

一种直接甲醇燃料电池阳极纳米催化剂的制备方法是在硝酸锰和其它金属硝酸盐的混合溶液中加入强氧化剂，涂抹于石墨电极上制成催化剂先驱体，通过先驱体在原位的热分解反应来制备以碳为载体的金属离子掺杂二氧化锰非铂纳米催化剂；制得的催化剂具有高的甲醇电催化活性、高的抗CO毒化性能以及低廉的价格等优点，可以有效地降低电池的制造成本，提高电池的整体电性能，从而有效地提高直接甲醇燃料电池的性能价格比及市场竞争能力。

The key point for preparing the isolated 1D metal driven nanowires is the non-stoichemetric additions of metal ions and thiolic ligands.

其中，金属离子与巯基乙酸的非等量反应是分离状态螺旋结构的纳米带形成的主要原因。

Reactive oxygen species causing DNA oxidative damage comes from two kinds of ways:one is from cellular normal physiological metabolism;the other is from outer environment.Redox-sensitive green fluorescent protein was expressed in Saccharomyces cerevisiae.Recombinant cells were evaluated in monitoring the changes in the redox state of living cells when challenged with toxicologically relevant metal ions NaAsO_2 or Pb(NO_3)_2 by measuring emission intensity at 510 nm with a Hitachi F6500 fluorescence spectrophotometer,roGFP expressed in yeast responded not only to typical membrane-permeant oxidants H_2O_2 and reductants DTT,but also to toxicological metal ion-induced intracellular redox changes in a dose-dependent manner.Moreover,exposure of yeast cells to NaAsO_2 or Pb(NO_3)_2 at concentrations that induced redox changes reported by roGFP caused up to 2～3 fold increases in DNA mutation frequency.This mutagenic effect was largely caused by oxidative stress since blocking the production of hydryl radicals with thiourea significantly reduced the mutation rate as well as delayed the cell death.

本文将对氧化还原状态变化敏感的绿色荧光蛋白roGFP1-R12，在酵母细胞中实现了多拷贝强表达；荧光扫描经强氧化剂H_2O_2和还原剂DTT以及环境中重金属NaAsO_2或Pb(NO_3)_2处理后的酵母细胞悬液，测定510 nm处的荧光发射强度结果显示，表达的绿色荧光蛋白对氧化还原水平敏感，且在510 nm处的荧光强度与一定的重金属浓度呈正相关，即roGFP1-R12在510nm处的荧光发射值随重金属浓度的增高而增强，从而说明重金属对细胞的毒性在一定程度上很可能是通过破坏细胞内的氧化还原平衡发生作用；同时通过该绿色荧光蛋白对胞内氧化还原状态变化的响应情况可以来实时检测环境中的重金属；遗传学的点突变频率及致死率实验数据表明，重金属能导致菌体的点突变频率和致死率升高，且活性氧的清除剂巯基脲能明显降低这种点突变和致死率，说明由重金属引发的这种点突变和致死效应在很大程度上是依赖于重金属对细胞诱导产生的氧化胁迫。

The carboxyl of the tripodal ligand is a goodbridging group. The building blocks are linked together by the bridging group andother weak interactions (hydrogen bond and π-π stacking interaction, etc), thusgenerating a one, two or three-dimensional metal complexes.2. Studies on the fluorescence properties of the lanthanide complexes indicated that:(1) The excitations in the ligand-based π-π〓 transitions cause the structuredemission of lanthanide complexes while the ligand luminescence is completelyquenched showing that ligand-to-metal energy transfer occurs.

三脚架配体所带的羧基是一个很好的桥联基团，配合物的结构基元通过这种基团的桥联作用及其它一些弱的作用力(如氢键、π-π堆积作用等)联系起来，构成了一维、二维或三维的超分子空间结构。2、稀土配合物的发光研究发现：(1)用配体的π-π〓跃迁波长进行激发，配合物均显示出稀土离子的特征发射峰，同时，配体的荧光峰没有出现，这说明在三脚架配体与稀土离子间进行了有效的能量传递。

Specializes in printing, can making and the manufacture of metal packaging containers, the company is located in the cities and the county road on the north side of West Tsubo, was established in December 2003, 12 million yuan registered capital, business scope is production and marketing of various tin packaging, tin three cans, metal packaging products.

企业现状：廊坊大信容器有限公司专业从事印铁、制罐和金属包装容器的制造，公司位于大城县城西津保路北侧，成立于2003年12月，注册资本1200万元，经营范围主要是生产销售各种铁罐包装、马口铁三片罐、金属包装制品。

The results show that a sound bonded interface is obtained without sheet inclusion, pore and unbinding. The microstructure consists of bulk α-Mg phase and needle compound in the weld metal, element Al diffuses along the grain boundary of the substrate into the welding line. A little Y diffuses into the base metal. A little Mn and Cu segregate and element Ni distributes homogeneously and no segregation appears in weld area.

结果表明：界面接合良好，未观察到片状夹杂物、气孔及未焊合等缺陷；焊缝区由块状α-Mg相和针状化合物组成，基体中的Al元素通过晶界扩散偏聚到焊缝中，微量Y元素扩散到基体中，有少量的Mn和Cu元素发生偏聚，Ni元素分布均匀，没有发生偏聚现象。

In this thesis, we have developed a new method, i. e., directly impregnating metal salts to uncalcined NH〓〓Si 〓 intercalate of ZrP followed by calcination, to prepare metal oxide supported silica pillared zirconium phosphates with high surface area.

本文采用先负载再焙烧的方法成功地解决了层柱材料负载的问题，制备了大比表面金属氧化物负载的硅柱磷酸锆。

The experimental system of metal fuel/water ramjet was introduced. The unchoked ramjet of metal fuel containing magnesium can burn steadily after once injecting water. In the experiment, the mass flux of water was stable and the pressure of chamber changed similarly with the secondary chamber.

介绍了金属燃料/水冲压发动机试验系统，采用非壅塞式构型实现了镁基金属燃料发动机一次加水后稳定燃烧，试验中进水流量稳定，补燃室与燃烧室压强变化相同。

According to the typical rib-web parts,different kinds of cushion plates are designed for local loading form ing.The local loading method is used to control flow direction and distance of superfluous metal of web plate to avoid the form ing defects,such as overlap and underfilling,and the isotherm al deform ation condition is employed to improve metal filling and decrease die pressure.

针对典型筋板类锻件，设计了不同形式的局部加载垫板进行局部加载，通过局部加载技术控制腹板处多余金属的流动方向和距离，避免产生折迭、充不满等缺陷，并且利用等温变形条件改善金属充填质量和降低模压力。

The labia have now been sutured together almost completely.The drains and the Foley catheter come out at the top.

此刻阴唇已经几乎完全的缝在一起了，排除多余淤血体液的管子和Foley导管从顶端冒出来。

To get the business done, I suggest we split the difference in price.

为了做成这笔生意，我建议我们在价格上大家各让一半。