查询词典 make into

Plate picture and text parts of ink is transferred to the procedure, for various reasons, such as plates and the contact and transfer ink when business card printing and membership card making blanket in the pressure, and plates and the contact with the authority into, the for ink absorption and osmosis and ink performance of optical phenomena, and so on, make the transition to the ink on the relative to the printing plate or mucilloid plates of the original film produces metaboly, a phenomenon in the mesh modulation cards and membership cards to make the dot gain, the law is both dot size, represents the edge of the egualling.

印版上图文局部的油墨在迁徙到被印物的历程洋，由于种种原因，如印版与被印物隔绝和迁徙油墨时活命的制卡和会员卡制作不张力、橡皮布在与印版和被印物隔绝时爆发的变形、被印物对于油墨的汲取和不合泌本领及墨迹表示的平学本体等，使迁徙到被印物上的墨迹不绝对于印版或用于制作印版的原版胶片的图文局部爆发变形本体，这种本体表示在网目调制卡和会员卡制作洋就是网点不收不小，其次序是无论网点巨细，都表示为边际的等距不收不小。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

"The fundamental challenge for any brand is to make sure that everybody understands the principles about how your brand can be used, to make the assets accessible, and to adapt what you're doing to blend into the local culture," says Nigel Hollis, chief global analyst at Millward Brown , a market research and brand consultancy.

&对任何品牌而言，基本的挑战是确保每个人理解关于你的品牌如何使用的原则，让品牌资产能被理解，并调整你的所作所为结合当地文化，&市场研究和品牌顾问公司 Millward Brown 的全球首席专家 Nigel Hollis 说。

Many Oriental are round face model, but many moonfaced people like the cent intermediate to seam, the hair is clingy scalp, intermediate cent is seamed, make the face appears rounder; Some still likes in the future to comb or the hairstyle of take everything into one's own hands, can make a face bigger, rounder only so.

不少东方人是圆脸型，但不少圆脸的人喜欢中间分缝，头发紧贴头皮，中间分缝，使脸显得更圆；有的还喜欢往后梳或一把抓的发型，这样只会使脸更大、更圆。

This project is to make aeroconcrete through the high temp and high pressure to make it into poriferous AAC with the tail quartz sand as the main material, the cement and lime as agglutinant featuring wind block, warm-keeping, sound/heat insulation, water/humidity resistance, antifreezing, vibration proof, acid/alkaline resistance, partial load bearing, large size and weight light, shape formed optionally, moreover, it is a new building material of mast processing possibility since it can be sawed, drilled and nailed so as to save masonry sand and slurry and quicken the process and simplify the operation.

本项目加气混凝土主要是以石英尾砂为基础，以水泥和石灰为胶和剂，经高温高压养护而成的多孔状AAC。

Proper jealousy , sip vinegar can show your attention to the other side , But it is the fair and sensible sipping the vinegar to make sure to keep in mind; On the contrary, not reasonable at all, sip the vinegar bursting into a rage , must make repugnantly

J——jealousy 适当的妒忌、呷醋能表示你对对方的重视，但切记是合情合理的呷醋；反之，毫不讲理，大发雷霆地呷醋，必惹反感。

Has turned around I knew you, in bursts into tears does not dare facing you to fear that you see me to know sadly at this moment I was thinking why you did love you so to treat my me to make the mistake well why anything so was being weary of me really had thought you did not have your day to be unable well to breathe sad did not know how should manage wants to forget you could not forget when you did record your face to record your tear completely to record your name also had leaves when back WU WU WU WU you to me more and more far even if, but how was I unable your soul I who forgot this not to manage likely completely like thisHow you will also come back to be able to be able to manage me to be unable to live like this get down, but your all will make me have the going on living reason not to know how should manage you to come back to think how one day of you certainly to meet can be able to handle sad such me to let you be repugnant very much asks you not to leave my you such to dislike me came back my here you really such not to be sick of me like this?

转过身去的我知道你在流泪不敢面对你怕你看见我的伤心知道么此刻我还是想着你恋着你的为何如此对待我我做错了什么嘛为何如此厌倦着我真的好想你没有你的日子好难过无法呼吸不知该怎么办想忘记你忘不掉你的全部记着你的脸记着你的泪记着你的名字还有离开时的背影 WU WU WU WU 何时你离我越来越远了可是即使这样我还是无法忘记的你全部像没有了灵魂的我该怎么办啊你还会回来吗会不会会不会怎么办我无法在这样生活下去可是你的一切令我有活下去的理由不知该怎么办啊你回来吧想着有一天你一定会回来的会不会会不会怎么办好伤心这样的我很让你讨厌吧拜托你不要离开我你就这么讨厌着我么别这样了回来我这里吧你真的就这么厌烦着我么？

Yo green jade is right " Persia is princely " make newly take seriously very, brought many manpower material resources into play, development group member reachs 140 people, having a lot of people is to come from the Yu Yobi's other group that make.

育碧对《波斯王子》新作十分重视，调动了大量的人力物力，开发团队成员多达140人，有很多人是来自于育碧其他的制作组。

And they said: Come, let us make a city and a tower, the top whereof may reach to heaven: and let us make our name famous before we be scattered abroad into all lands.

然后彼此说：「来，让我们建造一城一塔，塔顶摩天，好给我们作记念，免得我们在全地面上分散了！

The main task is to make customer mill services mainly for dryer fabrics but also press felts and forming fabrics, different analysis in laboratory for dryer fabric and press felts, to make technical translations from English into Chinese.

主要做造纸干网，毛布和成形网的客户技术服务，以及干网和毛布的实验室分析，将公司的技术资料翻译成中文。

Plunder melds and run with this jewel!

掠夺melds和运行与此宝石！

My dream is to be a crazy growing tree and extend at the edge between the city and the forest.

此刻，也许正是在通往天国的路上，我体验着这白色的晕旋。